Commit e17933c2 authored by R Sricharan's avatar R Sricharan Committed by Santosh Shilimkar

ARM: OMAP5: l3: Add l3 error handler support for omap5

The l3 interconnect ip is same for OMAP4 and OMAP5.
So reuse the l3 error handler error code for OMAP5
as well. Also a few targets has been newly added for
OMAP5. So updating the driver for that here.
Signed-off-by: default avatarR Sricharan <r.sricharan@ti.com>
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
parent 1a5da219
......@@ -197,6 +197,7 @@ obj-$(CONFIG_OMAP3_EMU) += emu.o
# L3 interconnect
obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
......
......@@ -84,7 +84,7 @@ static int __init omap4_l3_init(void)
* To avoid code running on other OMAPs in
* multi-omap builds
*/
if (!(cpu_is_omap44xx()))
if (!cpu_is_omap44xx() && !soc_is_omap54xx())
return -ENODEV;
for (i = 0; i < L3_MODULES; i++) {
......
......@@ -51,7 +51,9 @@ static u32 l3_targ_inst_clk1[] = {
0x200, /* DMM2 */
0x300, /* ABE */
0x400, /* L4CFG */
0x600 /* CLK2 PWR DISC */
0x600, /* CLK2 PWR DISC */
0x0, /* Host CLK1 */
0x900 /* L4 Wakeup */
};
static u32 l3_targ_inst_clk2[] = {
......@@ -72,11 +74,16 @@ static u32 l3_targ_inst_clk2[] = {
0xE00, /* missing in TRM corresponds to AES2*/
0xC00, /* L4 PER3 */
0xA00, /* L4 PER1*/
0xB00 /* L4 PER2*/
0xB00, /* L4 PER2*/
0x0, /* HOST CLK2 */
0x1800, /* CAL */
0x1700 /* LLI */
};
static u32 l3_targ_inst_clk3[] = {
0x0100 /* EMUSS */
0x0100 /* EMUSS */,
0x0300, /* DEBUGSS_CT_TBR */
0x0 /* HOST CLK3 */
};
static struct l3_masters_data {
......@@ -110,13 +117,15 @@ static struct l3_masters_data {
{ 0xC8, "USBHOSTFS"}
};
static char *l3_targ_inst_name[L3_MODULES][18] = {
static char *l3_targ_inst_name[L3_MODULES][21] = {
{
"DMM1",
"DMM2",
"ABE",
"L4CFG",
"CLK2 PWR DISC",
"HOST CLK1",
"L4 WAKEUP"
},
{
"CORTEX M3" ,
......@@ -137,9 +146,14 @@ static char *l3_targ_inst_name[L3_MODULES][18] = {
"L4 PER3",
"L4 PER1",
"L4 PER2",
"HOST CLK2",
"CAL",
"LLI"
},
{
"EMUSS",
"DEBUG SOURCE",
"HOST CLK3"
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment