Commit e1bfa75d authored by Charles Keepax's avatar Charles Keepax Committed by Rob Herring

ASoC: lochnagar: Move binding over to dtschema

Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 9826fb4d
Cirrus Logic Lochnagar Audio Development Board
Lochnagar is an evaluation and development board for Cirrus Logic
Smart CODEC and Amp devices. It allows the connection of most Cirrus
Logic devices on mini-cards, as well as allowing connection of
various application processor systems to provide a full evaluation
platform. Audio system topology, clocking and power can all be
controlled through the Lochnagar, allowing the device under test
to be used in a variety of possible use cases.
This binding document describes the binding for the audio portion
of the driver.
This binding must be part of the Lochnagar MFD binding:
[4] ../mfd/cirrus,lochnagar.txt
Required properties:
- compatible : One of the following strings:
"cirrus,lochnagar2-soundcard"
- #sound-dai-cells : Must be set to 1.
- clocks : Contains an entry for each entry in clock-names.
- clock-names : Must include the following clocks:
"mclk" Master clock source for the sound card, should normally
be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar
clock driver.
Example:
lochnagar-sc {
compatible = "cirrus,lochnagar2-soundcard";
#sound-dai-cells = <1>;
clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>;
clock-names = "mclk";
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cirrus Logic Lochnagar Audio Development Board
maintainers:
- patches@opensource.cirrus.com
description: |
Lochnagar is an evaluation and development board for Cirrus Logic
Smart CODEC and Amp devices. It allows the connection of most Cirrus
Logic devices on mini-cards, as well as allowing connection of various
application processor systems to provide a full evaluation platform.
Audio system topology, clocking and power can all be controlled through
the Lochnagar, allowing the device under test to be used in a variety of
possible use cases.
This binding document describes the binding for the audio portion of the
driver.
This binding must be part of the Lochnagar MFD binding:
[1] ../mfd/cirrus,lochnagar.yaml
properties:
compatible:
enum:
- cirrus,lochnagar2-soundcard
'#sound-dai-cells':
description:
The first cell indicating the audio interface.
const: 1
clocks:
description:
Master clock source for the sound card, should normally be set to
LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar clock driver.
maxItems: 1
clock-names:
const: mclk
required:
- compatible
- '#sound-dai-cells'
- clocks
- clock-names
additionalProperties: false
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment