Commit e252ab90 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx28-tx28: Remove 'enable-active-low' property

'enable-active-low' is not a valid property for a GPIO controlled regulator.

According to Documentation/devicetree/bindings/regulator/gpio-regulator.txt:

"Optional properties:
...
- enable-active-high	: Polarity of GPIO is active high (default is low)."

,so the correct way to define an active-low GPIO controlled regulator is to
simply not pass 'enable-active-high'.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 9bf52c0e
...@@ -91,7 +91,6 @@ reg_can_xcvr: regulator@4 { ...@@ -91,7 +91,6 @@ reg_can_xcvr: regulator@4 {
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 0>; gpio = <&gpio1 0 0>;
enable-active-low;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&tx28_flexcan_xcvr_pins>; pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment