Commit e2b35f3d authored by Viresh Kumar's avatar Viresh Kumar Committed by Vinod Koul

dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes

There are few existing user drivers of dw_dmac. They will break as soon as we
remove unused fields from struct dw_dma_slave. This patch focuses to fix these
user drivers to use dma_slave_config() routine.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@linux.intel.com>
parent 327e6970
......@@ -1353,7 +1353,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
goto fail;
slave->sdata.dma_dev = &dw_dmac0_device.dev;
slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
| DWC_CFGH_DST_PER(1));
slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
......@@ -2048,27 +2047,19 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
/* Check if DMA slave interface for capture should be configured. */
if (flags & AC97C_CAPTURE) {
rx_dws->dma_dev = &dw_dmac0_device.dev;
rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
rx_dws->src_master = 0;
rx_dws->dst_master = 1;
rx_dws->src_msize = DW_DMA_MSIZE_1;
rx_dws->dst_msize = DW_DMA_MSIZE_1;
rx_dws->fc = DW_DMA_FC_D_P2M;
}
/* Check if DMA slave interface for playback should be configured. */
if (flags & AC97C_PLAYBACK) {
tx_dws->dma_dev = &dw_dmac0_device.dev;
tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
tx_dws->src_master = 0;
tx_dws->dst_master = 1;
tx_dws->src_msize = DW_DMA_MSIZE_1;
tx_dws->dst_msize = DW_DMA_MSIZE_1;
tx_dws->fc = DW_DMA_FC_D_M2P;
}
if (platform_device_add_data(pdev, data,
......@@ -2138,14 +2129,10 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
dws = &data->dws;
dws->dma_dev = &dw_dmac0_device.dev;
dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
dws->cfg_hi = DWC_CFGH_DST_PER(2);
dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
dws->src_master = 0;
dws->dst_master = 1;
dws->src_msize = DW_DMA_MSIZE_1;
dws->dst_msize = DW_DMA_MSIZE_1;
dws->fc = DW_DMA_FC_D_M2P;
if (platform_device_add_data(pdev, data,
sizeof(struct atmel_abdac_pdata)))
......
......@@ -14,11 +14,4 @@ struct mci_dma_data {
#define slave_data_ptr(s) (&(s)->sdata)
#define find_slave_dev(s) ((s)->sdata.dma_dev)
#define setup_dma_addr(s, t, r) do { \
if (s) { \
(s)->sdata.tx_reg = (t); \
(s)->sdata.rx_reg = (r); \
} \
} while (0)
#endif /* __MACH_ATMEL_MCI_H */
......@@ -24,6 +24,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/types.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
......@@ -173,6 +174,7 @@ struct atmel_mci {
struct atmel_mci_dma dma;
struct dma_chan *data_chan;
struct dma_slave_config dma_conf;
u32 cmd_status;
u32 data_status;
......@@ -863,15 +865,16 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
slave_dirn = DMA_DEV_TO_MEM;
host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
} else {
direction = DMA_TO_DEVICE;
slave_dirn = DMA_MEM_TO_DEV;
host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
}
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
dmaengine_slave_config(chan, &host->dma_conf);
desc = chan->device->device_prep_slave_sg(chan,
data->sg, sglen, slave_dirn,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
......@@ -1957,22 +1960,27 @@ static void atmci_configure_dma(struct atmel_mci *host)
if (pdata && find_slave_dev(pdata->dma_slave)) {
dma_cap_mask_t mask;
setup_dma_addr(pdata->dma_slave,
host->mapbase + ATMCI_TDR,
host->mapbase + ATMCI_RDR);
/* Try to grab a DMA channel */
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
host->dma.chan =
dma_request_channel(mask, atmci_filter, pdata->dma_slave);
}
if (!host->dma.chan)
if (!host->dma.chan) {
dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
else
} else {
dev_info(&host->pdev->dev,
"Using %s for DMA transfers\n",
dma_chan_name(host->dma.chan));
host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
host->dma_conf.src_maxburst = 1;
host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
host->dma_conf.dst_maxburst = 1;
host->dma_conf.device_fc = false;
}
}
static inline unsigned int atmci_get_version(struct atmel_mci *host)
......
......@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/io.h>
#include <sound/core.h>
......@@ -467,15 +468,24 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
snd_card_set_dev(card, &pdev->dev);
if (pdata->dws.dma_dev) {
struct dw_dma_slave *dws = &pdata->dws;
dma_cap_mask_t mask;
dws->tx_reg = regs->start + DAC_DATA;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
dac->dma.chan = dma_request_channel(mask, filter, dws);
dac->dma.chan = dma_request_channel(mask, filter, &pdata->dws);
if (dac->dma.chan) {
struct dma_slave_config dma_conf = {
.dst_addr = regs->start + DAC_DATA,
.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
.src_maxburst = 1,
.dst_maxburst = 1,
.direction = DMA_MEM_TO_DEV,
.device_fc = false,
};
dmaengine_slave_config(dac->dma.chan, &dma_conf);
}
}
if (!pdata->dws.dma_dev || !dac->dma.chan) {
dev_dbg(&pdev->dev, "DMA not available\n");
......
......@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/io.h>
#include <sound/core.h>
......@@ -1014,16 +1015,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
if (cpu_is_at32ap7000()) {
if (pdata->rx_dws.dma_dev) {
struct dw_dma_slave *dws = &pdata->rx_dws;
dma_cap_mask_t mask;
dws->rx_reg = regs->start + AC97C_CARHR + 2;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
chip->dma.rx_chan = dma_request_channel(mask, filter,
dws);
&pdata->rx_dws);
if (chip->dma.rx_chan) {
struct dma_slave_config dma_conf = {
.src_addr = regs->start + AC97C_CARHR +
2,
.src_addr_width =
DMA_SLAVE_BUSWIDTH_2_BYTES,
.src_maxburst = 1,
.dst_maxburst = 1,
.direction = DMA_DEV_TO_MEM,
.device_fc = false,
};
dmaengine_slave_config(chip->dma.rx_chan,
&dma_conf);
}
dev_info(&chip->pdev->dev, "using %s for DMA RX\n",
dev_name(&chip->dma.rx_chan->dev->device));
......@@ -1031,16 +1044,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
}
if (pdata->tx_dws.dma_dev) {
struct dw_dma_slave *dws = &pdata->tx_dws;
dma_cap_mask_t mask;
dws->tx_reg = regs->start + AC97C_CATHR + 2;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
chip->dma.tx_chan = dma_request_channel(mask, filter,
dws);
&pdata->tx_dws);
if (chip->dma.tx_chan) {
struct dma_slave_config dma_conf = {
.dst_addr = regs->start + AC97C_CATHR +
2,
.dst_addr_width =
DMA_SLAVE_BUSWIDTH_2_BYTES,
.src_maxburst = 1,
.dst_maxburst = 1,
.direction = DMA_MEM_TO_DEV,
.device_fc = false,
};
dmaengine_slave_config(chip->dma.tx_chan,
&dma_conf);
}
dev_info(&chip->pdev->dev, "using %s for DMA TX\n",
dev_name(&chip->dma.tx_chan->dev->device));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment