Commit e2c518c6 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Samuel Ortiz

NFC: pn544: Convert to use GPIO descriptor

Since we got rid of platform data, the driver may use
GPIO descriptor directly.

This change fixes a potential issue of double freeing GPIOs in ACPI
case by converting to devm_gpiod_get().
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent e7f6ccaa
......@@ -21,9 +21,6 @@
#include <linux/crc-ccitt.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
......@@ -164,8 +161,9 @@ struct pn544_i2c_phy {
struct i2c_client *i2c_dev;
struct nfc_hci_dev *hdev;
unsigned int gpio_en;
unsigned int gpio_fw;
struct gpio_desc *gpiod_en;
struct gpio_desc *gpiod_fw;
unsigned int en_polarity;
u8 hw_variant;
......@@ -207,19 +205,18 @@ static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");
/* Disable fw download */
gpio_set_value_cansleep(phy->gpio_fw, 0);
gpiod_set_value_cansleep(phy->gpiod_fw, 0);
for (polarity = 0; polarity < 2; polarity++) {
phy->en_polarity = polarity;
retry = 3;
while (retry--) {
/* power off */
gpio_set_value_cansleep(phy->gpio_en,
!phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
usleep_range(10000, 15000);
/* power on */
gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
usleep_range(10000, 15000);
/* send reset */
......@@ -238,14 +235,13 @@ static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
"Could not detect nfc_en polarity, fallback to active high\n");
out:
gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
}
static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)
{
gpio_set_value_cansleep(phy->gpio_fw,
run_mode == PN544_FW_MODE ? 1 : 0);
gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0);
gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
usleep_range(10000, 15000);
phy->run_mode = run_mode;
......@@ -268,14 +264,14 @@ static void pn544_hci_i2c_disable(void *phy_id)
{
struct pn544_i2c_phy *phy = phy_id;
gpio_set_value_cansleep(phy->gpio_fw, 0);
gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_fw, 0);
gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
usleep_range(10000, 15000);
gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
usleep_range(10000, 15000);
gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);
gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
usleep_range(10000, 15000);
phy->powered = 0;
......@@ -876,96 +872,47 @@ static void pn544_hci_i2c_fw_work(struct work_struct *work)
static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client)
{
struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
struct gpio_desc *gpiod_en, *gpiod_fw;
struct device *dev = &client->dev;
/* Get EN GPIO from ACPI */
gpiod_en = devm_gpiod_get_index(dev, PN544_GPIO_NAME_EN, 1,
GPIOD_OUT_LOW);
if (IS_ERR(gpiod_en)) {
phy->gpiod_en = devm_gpiod_get_index(dev, PN544_GPIO_NAME_EN, 1,
GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_en)) {
nfc_err(dev, "Unable to get EN GPIO\n");
return -ENODEV;
return PTR_ERR(phy->gpiod_en);
}
phy->gpio_en = desc_to_gpio(gpiod_en);
/* Get FW GPIO from ACPI */
gpiod_fw = devm_gpiod_get_index(dev, PN544_GPIO_NAME_FW, 2,
GPIOD_OUT_LOW);
if (IS_ERR(gpiod_fw)) {
phy->gpiod_fw = devm_gpiod_get_index(dev, PN544_GPIO_NAME_FW, 2,
GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_fw)) {
nfc_err(dev, "Unable to get FW GPIO\n");
return -ENODEV;
return PTR_ERR(phy->gpiod_fw);
}
phy->gpio_fw = desc_to_gpio(gpiod_fw);
return 0;
}
static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
{
struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
struct device_node *pp;
int ret;
pp = client->dev.of_node;
if (!pp) {
ret = -ENODEV;
goto err_dt;
}
/* Obtention of EN GPIO from device tree */
ret = of_get_named_gpio(pp, "enable-gpios", 0);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
nfc_err(&client->dev,
"Failed to get EN gpio, error: %d\n", ret);
goto err_dt;
}
phy->gpio_en = ret;
/* Configuration of EN GPIO */
ret = gpio_request(phy->gpio_en, PN544_GPIO_NAME_EN);
if (ret) {
nfc_err(&client->dev, "Fail EN pin\n");
goto err_dt;
}
ret = gpio_direction_output(phy->gpio_en, 0);
if (ret) {
nfc_err(&client->dev, "Fail EN pin direction\n");
goto err_gpio_en;
}
struct device *dev = &client->dev;
/* Obtention of FW GPIO from device tree */
ret = of_get_named_gpio(pp, "firmware-gpios", 0);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
nfc_err(&client->dev,
"Failed to get FW gpio, error: %d\n", ret);
goto err_gpio_en;
/* Obtaining EN GPIO from device tree */
phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_en)) {
nfc_err(dev, "Failed to get EN gpio\n");
return PTR_ERR(phy->gpiod_en);
}
phy->gpio_fw = ret;
/* Configuration of FW GPIO */
ret = gpio_request(phy->gpio_fw, PN544_GPIO_NAME_FW);
if (ret) {
nfc_err(&client->dev, "Fail FW pin\n");
goto err_gpio_en;
}
ret = gpio_direction_output(phy->gpio_fw, 0);
if (ret) {
nfc_err(&client->dev, "Fail FW pin direction\n");
goto err_gpio_fw;
/* Obtaining FW GPIO from device tree */
phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_fw)) {
nfc_err(dev, "Failed to get FW gpio\n");
return PTR_ERR(phy->gpiod_fw);
}
return 0;
err_gpio_fw:
gpio_free(phy->gpio_fw);
err_gpio_en:
gpio_free(phy->gpio_en);
err_dt:
return ret;
}
static int pn544_hci_i2c_probe(struct i2c_client *client,
......@@ -1020,7 +967,7 @@ static int pn544_hci_i2c_probe(struct i2c_client *client,
PN544_HCI_I2C_DRIVER_NAME, phy);
if (r < 0) {
nfc_err(&client->dev, "Unable to register IRQ handler\n");
goto err_rti;
return r;
}
r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
......@@ -1035,10 +982,6 @@ static int pn544_hci_i2c_probe(struct i2c_client *client,
err_hci:
free_irq(client->irq, phy);
err_rti:
gpio_free(phy->gpio_en);
gpio_free(phy->gpio_fw);
return r;
}
......@@ -1059,9 +1002,6 @@ static int pn544_hci_i2c_remove(struct i2c_client *client)
free_irq(client->irq, phy);
gpio_free(phy->gpio_en);
gpio_free(phy->gpio_fw);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment