Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic'...

Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic' and 'clk-samsung' into clk-next

* clk-composite-determine-fix:
  clk: composite: Use rate_ops.determine_rate when also a mux is available
  clk: composite: Also consider .determine_rate for rate + mux composites

* clk-allwinner:
  clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
  clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
  dt-bindings: clocks: Fix typo in the H6 compatible
  clk: sunxi-ng: Use a separate lock for each CCU instance
  clk: sunxi-ng: Prevent unbinding CCUs via sysfs
  clk: sunxi-ng: Unregister clocks/resets when unbinding
  clk: sunxi-ng: Add machine dependency to A83T CCU
  clk: sunxi-ng: mux: Remove unused 'reg' field

* clk-amlogic:
  clk: meson: meson8b: Make the video clock trees mutable
  clk: meson: meson8b: Initialize the HDMI PLL registers
  clk: meson: meson8b: Add the HDMI PLL M/N parameters
  clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
  clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
  clk: meson: meson8b: Export the video clocks

* clk-samsung:
  clk: samsung: describe drivers in Kconfig
  clk: samsung: exynos5433: update apollo and atlas clock probing
  clk: samsung: add support for CPU clocks
  clk: samsung: Introduce Exynos850 clock driver
  dt-bindings: clock: Document Exynos850 CMU bindings
  dt-bindings: clock: Add bindings definitions for Exynos850 CMU
  clk: samsung: clk-pll: Implement pll0831x PLL type
  clk: samsung: clk-pll: Implement pll0822x PLL type
  clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
  clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
  clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
  clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()

Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml

@@ -24,7 +24,7 @@ properties:
       - const: allwinner,sun8i-v3s-de2-clk
       - const: allwinner,sun50i-a64-de2-clk
       - const: allwinner,sun50i-h5-de2-clk
-      - const: allwinner,sun50i-h6-de2-clk
+      - const: allwinner,sun50i-h6-de3-clk
       - items:
           - const: allwinner,sun8i-r40-de2-clk
           - const: allwinner,sun8i-h3-de2-clk

Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos850 SoC clock controller
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos850 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+  clocks must be defined as fixed-rate clocks in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos850.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-dpu
+      - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: eMMC clock (from CMU_TOP)
+            - description: SSS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_mmc_embd
+            - const: dout_core_sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-dpu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_dpu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-hsi
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI bus clock (from CMU_TOP)
+            - description: SD card clock (from CMU_TOP)
+            - description: "USB 2.0 DRD clock (from CMU_TOP)"
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: dout_hsi_bus
+            - const: dout_hsi_mmc_card
+            - const: dout_hsi_usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: UART clock (from CMU_TOP)
+            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_uart
+            - const: dout_peri_ip
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+
+    cmu_peri: clock-controller@10030000 {
+        compatible = "samsung,exynos850-cmu-peri";
+        reg = <0x10030000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_UART>,
+                 <&cmu_top CLK_DOUT_PERI_IP>;
+        clock-names = "oscclk", "dout_peri_bus",
+                      "dout_peri_uart", "dout_peri_ip";
+    };
+
+...

drivers/clk/clk-composite.c

@@ -42,6 +42,29 @@ static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
 	return rate_ops->recalc_rate(rate_hw, parent_rate);
 }
 
+static int clk_composite_determine_rate_for_parent(struct clk_hw *rate_hw,
+						   struct clk_rate_request *req,
+						   struct clk_hw *parent_hw,
+						   const struct clk_ops *rate_ops)
+{
+	long rate;
+
+	req->best_parent_hw = parent_hw;
+	req->best_parent_rate = clk_hw_get_rate(parent_hw);
+
+	if (rate_ops->determine_rate)
+		return rate_ops->determine_rate(rate_hw, req);
+
+	rate = rate_ops->round_rate(rate_hw, req->rate,
+				    &req->best_parent_rate);
+	if (rate < 0)
+		return rate;
+
+	req->rate = rate;
+
+	return 0;
+}
+
 static int clk_composite_determine_rate(struct clk_hw *hw,
 					struct clk_rate_request *req)
 {
@@ -51,54 +74,56 @@ static int clk_composite_determine_rate(struct clk_hw *hw,
 	struct clk_hw *rate_hw = composite->rate_hw;
 	struct clk_hw *mux_hw = composite->mux_hw;
 	struct clk_hw *parent;
-	unsigned long parent_rate;
-	long tmp_rate, best_rate = 0;
 	unsigned long rate_diff;
 	unsigned long best_rate_diff = ULONG_MAX;
-	long rate;
-	int i;
+	unsigned long best_rate = 0;
+	int i, ret;
 
-	if (rate_hw && rate_ops && rate_ops->determine_rate) {
-		__clk_hw_set_clk(rate_hw, hw);
-		return rate_ops->determine_rate(rate_hw, req);
-	} else if (rate_hw && rate_ops && rate_ops->round_rate &&
-		   mux_hw && mux_ops && mux_ops->set_parent) {
+	if (rate_hw && rate_ops &&
+	    (rate_ops->determine_rate || rate_ops->round_rate) &&
+	    mux_hw && mux_ops && mux_ops->set_parent) {
 		req->best_parent_hw = NULL;
 
 		if (clk_hw_get_flags(hw) & CLK_SET_RATE_NO_REPARENT) {
+			struct clk_rate_request tmp_req = *req;
+
 			parent = clk_hw_get_parent(mux_hw);
-			req->best_parent_hw = parent;
-			req->best_parent_rate = clk_hw_get_rate(parent);
 
-			rate = rate_ops->round_rate(rate_hw, req->rate,
-						    &req->best_parent_rate);
-			if (rate < 0)
-				return rate;
+			ret = clk_composite_determine_rate_for_parent(rate_hw,
+								      &tmp_req,
+								      parent,
+								      rate_ops);
+			if (ret)
+				return ret;
+
+			req->rate = tmp_req.rate;
+			req->best_parent_rate = tmp_req.best_parent_rate;
 
-			req->rate = rate;
 			return 0;
 		}
 
 		for (i = 0; i < clk_hw_get_num_parents(mux_hw); i++) {
+			struct clk_rate_request tmp_req = *req;
+
 			parent = clk_hw_get_parent_by_index(mux_hw, i);
 			if (!parent)
 				continue;
 
-			parent_rate = clk_hw_get_rate(parent);
-
-			tmp_rate = rate_ops->round_rate(rate_hw, req->rate,
-							&parent_rate);
-			if (tmp_rate < 0)
+			ret = clk_composite_determine_rate_for_parent(rate_hw,
+								      &tmp_req,
+								      parent,
+								      rate_ops);
+			if (ret)
 				continue;
 
-			rate_diff = abs(req->rate - tmp_rate);
+			rate_diff = abs(req->rate - tmp_req.rate);
 
 			if (!rate_diff || !req->best_parent_hw
 				       || best_rate_diff > rate_diff) {
 				req->best_parent_hw = parent;
-				req->best_parent_rate = parent_rate;
+				req->best_parent_rate = tmp_req.best_parent_rate;
 				best_rate_diff = rate_diff;
-				best_rate = tmp_rate;
+				best_rate = tmp_req.rate;
 			}
 
 			if (!rate_diff)
@@ -107,6 +132,9 @@ static int clk_composite_determine_rate(struct clk_hw *hw,
 
 		req->rate = best_rate;
 		return 0;
+	} else if (rate_hw && rate_ops && rate_ops->determine_rate) {
+		__clk_hw_set_clk(rate_hw, hw);
+		return rate_ops->determine_rate(rate_hw, req);
 	} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
 		__clk_hw_set_clk(mux_hw, hw);
 		return mux_ops->determine_rate(mux_hw, req);

drivers/clk/meson/meson8b.h

@@ -51,6 +51,16 @@
 #define HHI_SYS_PLL_CNTL		0x300 /* 0xc0 offset in data sheet */
 #define HHI_VID_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
 #define HHI_VID_PLL_CNTL2		0x324 /* 0xc9 offset in data sheet */
+#define HHI_VID_PLL_CNTL3		0x328 /* 0xca offset in data sheet */
+#define HHI_VID_PLL_CNTL4		0x32c /* 0xcb offset in data sheet */
+#define HHI_VID_PLL_CNTL5		0x330 /* 0xcc offset in data sheet */
+#define HHI_VID_PLL_CNTL6		0x334 /* 0xcd offset in data sheet */
+#define HHI_VID2_PLL_CNTL		0x380 /* 0xe0 offset in data sheet */
+#define HHI_VID2_PLL_CNTL2		0x384 /* 0xe1 offset in data sheet */
+#define HHI_VID2_PLL_CNTL3		0x388 /* 0xe2 offset in data sheet */
+#define HHI_VID2_PLL_CNTL4		0x38c /* 0xe3 offset in data sheet */
+#define HHI_VID2_PLL_CNTL5		0x390 /* 0xe4 offset in data sheet */
+#define HHI_VID2_PLL_CNTL6		0x394 /* 0xe5 offset in data sheet */
 
 /*
  * MPLL register offeset taken from the S905 datasheet. Vendor kernel source
@@ -107,14 +117,11 @@
 #define CLKID_PERIPH_SEL	125
 #define CLKID_AXI_SEL		127
 #define CLKID_L2_DRAM_SEL	129
-#define CLKID_HDMI_PLL_LVDS_OUT	131
-#define CLKID_HDMI_PLL_HDMI_OUT	132
+#define CLKID_HDMI_PLL_LVDS_OUT 131
 #define CLKID_VID_PLL_IN_SEL	133
 #define CLKID_VID_PLL_IN_EN	134
 #define CLKID_VID_PLL_PRE_DIV	135
 #define CLKID_VID_PLL_POST_DIV	136
-#define CLKID_VID_PLL_FINAL_DIV	137
-#define CLKID_VCLK_IN_SEL	138
 #define CLKID_VCLK_IN_EN	139
 #define CLKID_VCLK_DIV1		140
 #define CLKID_VCLK_DIV2_DIV	141
@@ -125,7 +132,6 @@
 #define CLKID_VCLK_DIV6		146
 #define CLKID_VCLK_DIV12_DIV	147
 #define CLKID_VCLK_DIV12	148
-#define CLKID_VCLK2_IN_SEL	149
 #define CLKID_VCLK2_IN_EN	150
 #define CLKID_VCLK2_DIV1	151
 #define CLKID_VCLK2_DIV2_DIV	152
@@ -137,17 +143,11 @@
 #define CLKID_VCLK2_DIV12_DIV	158
 #define CLKID_VCLK2_DIV12	159
 #define CLKID_CTS_ENCT_SEL	160
-#define CLKID_CTS_ENCT		161
 #define CLKID_CTS_ENCP_SEL	162
-#define CLKID_CTS_ENCP		163
 #define CLKID_CTS_ENCI_SEL	164
-#define CLKID_CTS_ENCI		165
 #define CLKID_HDMI_TX_PIXEL_SEL	166
-#define CLKID_HDMI_TX_PIXEL	167
 #define CLKID_CTS_ENCL_SEL	168
-#define CLKID_CTS_ENCL		169
 #define CLKID_CTS_VDAC0_SEL	170
-#define CLKID_CTS_VDAC0		171
 #define CLKID_HDMI_SYS_SEL	172
 #define CLKID_HDMI_SYS_DIV	173
 #define CLKID_MALI_0_SEL	175
@@ -182,8 +182,10 @@
 #define CLKID_CTS_MCLK_I958_DIV	211
 #define CLKID_VCLK_EN		214
 #define CLKID_VCLK2_EN		215
+#define CLKID_VID_PLL_LVDS_EN	216
+#define CLKID_HDMI_PLL_DCO_IN   217
 
-#define CLK_NR_CLKS		216
+#define CLK_NR_CLKS		218
 
 /*
  * include the CLKID and RESETID that have

drivers/clk/samsung/Kconfig

@@ -67,7 +67,8 @@ config EXYNOS_5420_COMMON_CLK
 	depends on COMMON_CLK_SAMSUNG
 	help
 	  Support for the clock controller present on the Samsung
-	  Exynos5420 SoCs. Choose Y here only if you build for this SoC.
+	  Exynos5420/Exynos5422/Exynos5800 SoCs. Choose Y here only if you
+	  build for this SoC.
 
 config EXYNOS_ARM64_COMMON_CLK
 	bool "Samsung Exynos ARMv8-family clock controller support" if COMPILE_TEST
@@ -79,38 +80,47 @@ config EXYNOS_AUDSS_CLK_CON
 	default y if ARCH_EXYNOS
 	help
 	  Support for the Audio Subsystem CLKCON clock controller present
-	  on some Exynos SoC variants. Choose M or Y here if you want to
-	  use audio devices such as I2S, PCM, etc.
+	  on some Samsung Exynos SoC variants. Choose M or Y here if you want
+	  to use audio devices such as I2S, PCM, etc.
 
 config EXYNOS_CLKOUT
 	tristate "Samsung Exynos clock output driver"
 	depends on COMMON_CLK_SAMSUNG
 	default y if ARCH_EXYNOS
 	help
-	  Support for the clock output (XCLKOUT) present on some of Exynos SoC
-	  variants. Usually the XCLKOUT is used to monitor the status of the
-	  certains clocks from SoC, but it could also be tied to other devices
-	  as an input clock.
+	  Support for the clock output (XCLKOUT) present on some of Samsung
+	  Exynos SoC variants. Usually the XCLKOUT is used to monitor the
+	  status of the certains clocks from SoC, but it could also be tied to
+	  other devices as an input clock.
 
 # For S3C24XX platforms, select following symbols:
 config S3C2410_COMMON_CLK
 	bool "Samsung S3C2410 clock controller support" if COMPILE_TEST
 	select COMMON_CLK_SAMSUNG
 	help
-	  Build the s3c2410 clock driver based on the common clock framework.
+	  Support for the clock controller present on the Samsung
+	  S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for
+	  this SoC.
 
 config S3C2410_COMMON_DCLK
 	bool
 	select COMMON_CLK_SAMSUNG
 	select REGMAP_MMIO
 	help
-	  Temporary symbol to build the dclk driver based on the common clock
-	  framework.
+	  Support for the dclk clock controller present on the Samsung
+	  S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build
+	  for this SoC.
 
 config S3C2412_COMMON_CLK
 	bool "Samsung S3C2412 clock controller support" if COMPILE_TEST
 	select COMMON_CLK_SAMSUNG
+	help
+	  Support for the clock controller present on the Samsung S3C2412 SoCs.
+	  Choose Y here only if you build for this SoC.
 
 config S3C2443_COMMON_CLK
 	bool "Samsung S3C2443 clock controller support" if COMPILE_TEST
 	select COMMON_CLK_SAMSUNG
+	help
+	  Support for the clock controller present on the Samsung
+	  S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC.

drivers/clk/samsung/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos5433.o
 obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
 obj-$(CONFIG_EXYNOS_CLKOUT)	+= clk-exynos-clkout.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7.o
+obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos850.o
 obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
 obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o

drivers/clk/samsung/clk-cpu.c

@@ -469,3 +469,21 @@ int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
 	kfree(cpuclk);
 	return ret;
 }
+
+void __init samsung_clk_register_cpu(struct samsung_clk_provider *ctx,
+		const struct samsung_cpu_clock *list, unsigned int nr_clk)
+{
+	unsigned int idx;
+	unsigned int num_cfgs;
+	struct clk_hw **hws = ctx->clk_data.hws;
+
+	for (idx = 0; idx < nr_clk; idx++, list++) {
+		/* find count of configuration rates in cfg */
+		for (num_cfgs = 0; list->cfg[num_cfgs].prate != 0; )
+			num_cfgs++;
+
+		exynos_register_cpu_clock(ctx, list->id, list->name, hws[list->parent_id],
+				hws[list->alt_parent_id], list->offset, list->cfg, num_cfgs,
+				list->flags);
+	}
+}

drivers/clk/samsung/clk-exynos-audss.c

@@ -129,7 +129,6 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
 	struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
 	const struct exynos_audss_clk_drvdata *variant;
 	struct clk_hw **clk_table;
-	struct resource *res;
 	struct device *dev = &pdev->dev;
 	int i, ret = 0;
 
@@ -137,8 +136,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
 	if (!variant)
 		return -EINVAL;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg_base = devm_ioremap_resource(dev, res);
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 

drivers/clk/samsung/clk-exynos4412-isp.c

@@ -110,11 +110,9 @@ static int __init exynos4x12_isp_clk_probe(struct platform_device *pdev)
 	struct samsung_clk_provider *ctx;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct resource *res;
 	void __iomem *reg_base;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg_base = devm_ioremap_resource(dev, res);
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 

drivers/clk/samsung/clk-exynos5433.c

@@ -3675,44 +3675,32 @@ static const struct exynos_cpuclk_cfg_data exynos5433_apolloclk_d[] __initconst
 	{  0 },
 };
 
+static const struct samsung_cpu_clock apollo_cpu_clks[] __initconst = {
+	CPU_CLK(CLK_SCLK_APOLLO, "apolloclk", CLK_MOUT_APOLLO_PLL,
+			CLK_MOUT_BUS_PLL_APOLLO_USER,
+			CLK_CPU_HAS_E5433_REGS_LAYOUT, 0x200,
+			exynos5433_apolloclk_d),
+};
+
+static const struct samsung_cmu_info apollo_cmu_info __initconst = {
+	.pll_clks	= apollo_pll_clks,
+	.nr_pll_clks	= ARRAY_SIZE(apollo_pll_clks),
+	.mux_clks	= apollo_mux_clks,
+	.nr_mux_clks	= ARRAY_SIZE(apollo_mux_clks),
+	.div_clks	= apollo_div_clks,
+	.nr_div_clks	= ARRAY_SIZE(apollo_div_clks),
+	.gate_clks	= apollo_gate_clks,
+	.nr_gate_clks	= ARRAY_SIZE(apollo_gate_clks),
+	.cpu_clks	= apollo_cpu_clks,
+	.nr_cpu_clks	= ARRAY_SIZE(apollo_cpu_clks),
+	.nr_clk_ids	= APOLLO_NR_CLK,
+	.clk_regs	= apollo_clk_regs,
+	.nr_clk_regs	= ARRAY_SIZE(apollo_clk_regs),
+};
+
 static void __init exynos5433_cmu_apollo_init(struct device_node *np)
 {
-	void __iomem *reg_base;
-	struct samsung_clk_provider *ctx;
-	struct clk_hw **hws;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
-		panic("%s: failed to map registers\n", __func__);
-		return;
-	}
-
-	ctx = samsung_clk_init(np, reg_base, APOLLO_NR_CLK);
-	if (!ctx) {
-		panic("%s: unable to allocate ctx\n", __func__);
-		return;
-	}
-
-	samsung_clk_register_pll(ctx, apollo_pll_clks,
-				 ARRAY_SIZE(apollo_pll_clks), reg_base);
-	samsung_clk_register_mux(ctx, apollo_mux_clks,
-				 ARRAY_SIZE(apollo_mux_clks));
-	samsung_clk_register_div(ctx, apollo_div_clks,
-				 ARRAY_SIZE(apollo_div_clks));
-	samsung_clk_register_gate(ctx, apollo_gate_clks,
-				  ARRAY_SIZE(apollo_gate_clks));
-
-	hws = ctx->clk_data.hws;
-
-	exynos_register_cpu_clock(ctx, CLK_SCLK_APOLLO, "apolloclk",
-		hws[CLK_MOUT_APOLLO_PLL], hws[CLK_MOUT_BUS_PLL_APOLLO_USER], 0x200,
-		exynos5433_apolloclk_d, ARRAY_SIZE(exynos5433_apolloclk_d),
-		CLK_CPU_HAS_E5433_REGS_LAYOUT);
-
-	samsung_clk_sleep_init(reg_base, apollo_clk_regs,
-			       ARRAY_SIZE(apollo_clk_regs));
-
-	samsung_clk_of_add_provider(np, ctx);
+	samsung_cmu_register_one(np, &apollo_cmu_info);
 }
 CLK_OF_DECLARE(exynos5433_cmu_apollo, "samsung,exynos5433-cmu-apollo",
 		exynos5433_cmu_apollo_init);
@@ -3932,44 +3920,32 @@ static const struct exynos_cpuclk_cfg_data exynos5433_atlasclk_d[] __initconst =
 	{  0 },
 };
 
-static void __init exynos5433_cmu_atlas_init(struct device_node *np)
-{
-	void __iomem *reg_base;
-	struct samsung_clk_provider *ctx;
-	struct clk_hw **hws;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
-		panic("%s: failed to map registers\n", __func__);
-		return;
-	}
-
-	ctx = samsung_clk_init(np, reg_base, ATLAS_NR_CLK);
-	if (!ctx) {
-		panic("%s: unable to allocate ctx\n", __func__);
-		return;
-	}
-
-	samsung_clk_register_pll(ctx, atlas_pll_clks,
-				 ARRAY_SIZE(atlas_pll_clks), reg_base);
-	samsung_clk_register_mux(ctx, atlas_mux_clks,
-				 ARRAY_SIZE(atlas_mux_clks));
-	samsung_clk_register_div(ctx, atlas_div_clks,
-				 ARRAY_SIZE(atlas_div_clks));
-	samsung_clk_register_gate(ctx, atlas_gate_clks,
-				  ARRAY_SIZE(atlas_gate_clks));
-
-	hws = ctx->clk_data.hws;
-
-	exynos_register_cpu_clock(ctx, CLK_SCLK_ATLAS, "atlasclk",
-		hws[CLK_MOUT_ATLAS_PLL], hws[CLK_MOUT_BUS_PLL_ATLAS_USER], 0x200,
-		exynos5433_atlasclk_d, ARRAY_SIZE(exynos5433_atlasclk_d),
-		CLK_CPU_HAS_E5433_REGS_LAYOUT);
+static const struct samsung_cpu_clock atlas_cpu_clks[] __initconst = {
+	CPU_CLK(CLK_SCLK_ATLAS, "atlasclk", CLK_MOUT_ATLAS_PLL,
+			CLK_MOUT_BUS_PLL_ATLAS_USER,
+			CLK_CPU_HAS_E5433_REGS_LAYOUT, 0x200,
+			exynos5433_atlasclk_d),
+};
 
-	samsung_clk_sleep_init(reg_base, atlas_clk_regs,
-			       ARRAY_SIZE(atlas_clk_regs));
+static const struct samsung_cmu_info atlas_cmu_info __initconst = {
+	.pll_clks	= atlas_pll_clks,
+	.nr_pll_clks	= ARRAY_SIZE(atlas_pll_clks),
+	.mux_clks	= atlas_mux_clks,
+	.nr_mux_clks	= ARRAY_SIZE(atlas_mux_clks),
+	.div_clks	= atlas_div_clks,
+	.nr_div_clks	= ARRAY_SIZE(atlas_div_clks),
+	.gate_clks	= atlas_gate_clks,
+	.nr_gate_clks	= ARRAY_SIZE(atlas_gate_clks),
+	.cpu_clks	= atlas_cpu_clks,
+	.nr_cpu_clks	= ARRAY_SIZE(atlas_cpu_clks),
+	.nr_clk_ids	= ATLAS_NR_CLK,
+	.clk_regs	= atlas_clk_regs,
+	.nr_clk_regs	= ARRAY_SIZE(atlas_clk_regs),
+};
 
-	samsung_clk_of_add_provider(np, ctx);
+static void __init exynos5433_cmu_atlas_init(struct device_node *np)
+{
+	samsung_cmu_register_one(np, &atlas_cmu_info);
 }
 CLK_OF_DECLARE(exynos5433_cmu_atlas, "samsung,exynos5433-cmu-atlas",
 		exynos5433_cmu_atlas_init);
@@ -5564,7 +5540,6 @@ static int __init exynos5433_cmu_probe(struct platform_device *pdev)
 	struct exynos5433_cmu_data *data;
 	struct samsung_clk_provider *ctx;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	void __iomem *reg_base;
 	int i;
 
@@ -5577,8 +5552,7 @@ static int __init exynos5433_cmu_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	ctx = &data->ctx;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg_base = devm_ioremap_resource(dev, res);
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 

drivers/clk/samsung/clk-pll.c

@@ -415,6 +415,186 @@ static const struct clk_ops samsung_pll36xx_clk_min_ops = {
 	.recalc_rate = samsung_pll36xx_recalc_rate,
 };
 
+/*
+ * PLL0822x Clock Type
+ */
+/* Maximum lock time can be 150 * PDIV cycles */
+#define PLL0822X_LOCK_FACTOR		(150)
+
+#define PLL0822X_MDIV_MASK		(0x3FF)
+#define PLL0822X_PDIV_MASK		(0x3F)
+#define PLL0822X_SDIV_MASK		(0x7)
+#define PLL0822X_MDIV_SHIFT		(16)
+#define PLL0822X_PDIV_SHIFT		(8)
+#define PLL0822X_SDIV_SHIFT		(0)
+#define PLL0822X_LOCK_STAT_SHIFT	(29)
+#define PLL0822X_ENABLE_SHIFT		(31)
+
+static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 mdiv, pdiv, sdiv, pll_con3;
+	u64 fvco = parent_rate;
+
+	pll_con3 = readl_relaxed(pll->con_reg);
+	mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK;
+	pdiv = (pll_con3 >> PLL0822X_PDIV_SHIFT) & PLL0822X_PDIV_MASK;
+	sdiv = (pll_con3 >> PLL0822X_SDIV_SHIFT) & PLL0822X_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate,
+				     unsigned long prate)
+{
+	const struct samsung_pll_rate_table *rate;
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con3;
+
+	/* Get required rate settings from table */
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, clk_hw_get_name(hw));
+		return -EINVAL;
+	}
+
+	/* Change PLL PMS values */
+	pll_con3 = readl_relaxed(pll->con_reg);
+	pll_con3 &= ~((PLL0822X_MDIV_MASK << PLL0822X_MDIV_SHIFT) |
+			(PLL0822X_PDIV_MASK << PLL0822X_PDIV_SHIFT) |
+			(PLL0822X_SDIV_MASK << PLL0822X_SDIV_SHIFT));
+	pll_con3 |= (rate->mdiv << PLL0822X_MDIV_SHIFT) |
+			(rate->pdiv << PLL0822X_PDIV_SHIFT) |
+			(rate->sdiv << PLL0822X_SDIV_SHIFT);
+
+	/* Set PLL lock time */
+	writel_relaxed(rate->pdiv * PLL0822X_LOCK_FACTOR,
+			pll->lock_reg);
+
+	/* Write PMS values */
+	writel_relaxed(pll_con3, pll->con_reg);
+
+	/* Wait for PLL lock if the PLL is enabled */
+	if (pll_con3 & BIT(pll->enable_offs))
+		return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
+
+	return 0;
+}
+
+static const struct clk_ops samsung_pll0822x_clk_ops = {
+	.recalc_rate = samsung_pll0822x_recalc_rate,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_pll0822x_set_rate,
+	.enable = samsung_pll3xxx_enable,
+	.disable = samsung_pll3xxx_disable,
+};
+
+static const struct clk_ops samsung_pll0822x_clk_min_ops = {
+	.recalc_rate = samsung_pll0822x_recalc_rate,
+};
+
+/*
+ * PLL0831x Clock Type
+ */
+/* Maximum lock time can be 500 * PDIV cycles */
+#define PLL0831X_LOCK_FACTOR		(500)
+
+#define PLL0831X_KDIV_MASK		(0xFFFF)
+#define PLL0831X_MDIV_MASK		(0x1FF)
+#define PLL0831X_PDIV_MASK		(0x3F)
+#define PLL0831X_SDIV_MASK		(0x7)
+#define PLL0831X_MDIV_SHIFT		(16)
+#define PLL0831X_PDIV_SHIFT		(8)
+#define PLL0831X_SDIV_SHIFT		(0)
+#define PLL0831X_KDIV_SHIFT		(0)
+#define PLL0831X_LOCK_STAT_SHIFT	(29)
+#define PLL0831X_ENABLE_SHIFT		(31)
+
+static unsigned long samsung_pll0831x_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 mdiv, pdiv, sdiv, pll_con3, pll_con5;
+	s16 kdiv;
+	u64 fvco = parent_rate;
+
+	pll_con3 = readl_relaxed(pll->con_reg);
+	pll_con5 = readl_relaxed(pll->con_reg + 8);
+	mdiv = (pll_con3 >> PLL0831X_MDIV_SHIFT) & PLL0831X_MDIV_MASK;
+	pdiv = (pll_con3 >> PLL0831X_PDIV_SHIFT) & PLL0831X_PDIV_MASK;
+	sdiv = (pll_con3 >> PLL0831X_SDIV_SHIFT) & PLL0831X_SDIV_MASK;
+	kdiv = (s16)((pll_con5 >> PLL0831X_KDIV_SHIFT) & PLL0831X_KDIV_MASK);
+
+	fvco *= (mdiv << 16) + kdiv;
+	do_div(fvco, (pdiv << sdiv));
+	fvco >>= 16;
+
+	return (unsigned long)fvco;
+}
+
+static int samsung_pll0831x_set_rate(struct clk_hw *hw, unsigned long drate,
+				     unsigned long parent_rate)
+{
+	const struct samsung_pll_rate_table *rate;
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con3, pll_con5;
+
+	/* Get required rate settings from table */
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, clk_hw_get_name(hw));
+		return -EINVAL;
+	}
+
+	pll_con3 = readl_relaxed(pll->con_reg);
+	pll_con5 = readl_relaxed(pll->con_reg + 8);
+
+	/* Change PLL PMSK values */
+	pll_con3 &= ~((PLL0831X_MDIV_MASK << PLL0831X_MDIV_SHIFT) |
+			(PLL0831X_PDIV_MASK << PLL0831X_PDIV_SHIFT) |
+			(PLL0831X_SDIV_MASK << PLL0831X_SDIV_SHIFT));
+	pll_con3 |= (rate->mdiv << PLL0831X_MDIV_SHIFT) |
+			(rate->pdiv << PLL0831X_PDIV_SHIFT) |
+			(rate->sdiv << PLL0831X_SDIV_SHIFT);
+	pll_con5 &= ~(PLL0831X_KDIV_MASK << PLL0831X_KDIV_SHIFT);
+	/*
+	 * kdiv is 16-bit 2's complement (s16), but stored as unsigned int.
+	 * Cast it to u16 to avoid leading 0xffff's in case of negative value.
+	 */
+	pll_con5 |= ((u16)rate->kdiv << PLL0831X_KDIV_SHIFT);
+
+	/* Set PLL lock time */
+	writel_relaxed(rate->pdiv * PLL0831X_LOCK_FACTOR, pll->lock_reg);
+
+	/* Write PMSK values */
+	writel_relaxed(pll_con3, pll->con_reg);
+	writel_relaxed(pll_con5, pll->con_reg + 8);
+
+	/* Wait for PLL lock if the PLL is enabled */
+	if (pll_con3 & BIT(pll->enable_offs))
+		return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
+
+	return 0;
+}
+
+static const struct clk_ops samsung_pll0831x_clk_ops = {
+	.recalc_rate = samsung_pll0831x_recalc_rate,
+	.set_rate = samsung_pll0831x_set_rate,
+	.round_rate = samsung_pll_round_rate,
+	.enable = samsung_pll3xxx_enable,
+	.disable = samsung_pll3xxx_disable,
+};
+
+static const struct clk_ops samsung_pll0831x_clk_min_ops = {
+	.recalc_rate = samsung_pll0831x_recalc_rate,
+};
+
 /*
  * PLL45xx Clock Type
  */
@@ -1296,6 +1476,14 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 		else
 			init.ops = &samsung_pll35xx_clk_ops;
 		break;
+	case pll_0822x:
+		pll->enable_offs = PLL0822X_ENABLE_SHIFT;
+		pll->lock_offs = PLL0822X_LOCK_STAT_SHIFT;
+		if (!pll->rate_table)
+			init.ops = &samsung_pll0822x_clk_min_ops;
+		else
+			init.ops = &samsung_pll0822x_clk_ops;
+		break;
 	case pll_4500:
 		init.ops = &samsung_pll45xx_clk_min_ops;
 		break;
@@ -1316,6 +1504,14 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 		else
 			init.ops = &samsung_pll36xx_clk_ops;
 		break;
+	case pll_0831x:
+		pll->enable_offs = PLL0831X_ENABLE_SHIFT;
+		pll->lock_offs = PLL0831X_LOCK_STAT_SHIFT;
+		if (!pll->rate_table)
+			init.ops = &samsung_pll0831x_clk_min_ops;
+		else
+			init.ops = &samsung_pll0831x_clk_ops;
+		break;
 	case pll_6552:
 	case pll_6552_s3c2416:
 		init.ops = &samsung_pll6552_clk_ops;

drivers/clk/samsung/clk-pll.h

@@ -36,6 +36,8 @@ enum samsung_pll_type {
 	pll_1451x,
 	pll_1452x,
 	pll_1460x,
+	pll_0822x,
+	pll_0831x,
 };
 
 #define PLL_RATE(_fin, _m, _p, _s, _k, _ks) \

drivers/clk/samsung/clk-s5pv210-audss.c

@@ -63,15 +63,13 @@ static struct syscore_ops s5pv210_audss_clk_syscore_ops = {
 static int s5pv210_audss_clk_probe(struct platform_device *pdev)
 {
 	int i, ret = 0;
-	struct resource *res;
 	const char *mout_audss_p[2];
 	const char *mout_i2s_p[3];
 	const char *hclk_p;
 	struct clk_hw **clk_table;
 	struct clk *hclk, *pll_ref, *pll_in, *cdclk, *sclk_audio;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg_base = devm_ioremap_resource(&pdev->dev, res);
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 

drivers/clk/samsung/clk.c

@@ -378,6 +378,8 @@ struct samsung_clk_provider * __init samsung_cmu_register_one(
 		samsung_clk_extended_sleep_init(reg_base,
 			cmu->clk_regs, cmu->nr_clk_regs,
 			cmu->suspend_regs, cmu->nr_suspend_regs);
+	if (cmu->cpu_clks)
+		samsung_clk_register_cpu(ctx, cmu->cpu_clks, cmu->nr_cpu_clks);
 
 	samsung_clk_of_add_provider(np, ctx);
 

drivers/clk/samsung/clk.h

@@ -271,6 +271,27 @@ struct samsung_pll_clock {
 	__PLL(_typ, _id, _name, _pname, CLK_GET_RATE_NOCACHE, _lock,	\
 	      _con, _rtable)
 
+struct samsung_cpu_clock {
+	unsigned int	id;
+	const char	*name;
+	unsigned int	parent_id;
+	unsigned int	alt_parent_id;
+	unsigned long	flags;
+	int		offset;
+	const struct exynos_cpuclk_cfg_data *cfg;
+};
+
+#define CPU_CLK(_id, _name, _pid, _apid, _flags, _offset, _cfg) \
+	{							\
+		.id		  = _id,			\
+		.name		  = _name,			\
+		.parent_id	  = _pid,			\
+		.alt_parent_id	  = _apid,			\
+		.flags		  = _flags,			\
+		.offset		  = _offset,			\
+		.cfg		  = _cfg,			\
+	}
+
 struct samsung_clock_reg_cache {
 	struct list_head node;
 	void __iomem *reg_base;
@@ -301,6 +322,9 @@ struct samsung_cmu_info {
 	unsigned int nr_fixed_factor_clks;
 	/* total number of clocks with IDs assigned*/
 	unsigned int nr_clk_ids;
+	/* list of cpu clocks and respective count */
+	const struct samsung_cpu_clock *cpu_clks;
+	unsigned int nr_cpu_clks;
 
 	/* list and number of clocks registers */
 	const unsigned long *clk_regs;
@@ -350,6 +374,8 @@ extern void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
 extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 			const struct samsung_pll_clock *pll_list,
 			unsigned int nr_clk, void __iomem *base);
+extern void samsung_clk_register_cpu(struct samsung_clk_provider *ctx,
+		const struct samsung_cpu_clock *list, unsigned int nr_clk);
 
 extern struct samsung_clk_provider __init *samsung_cmu_register_one(
 			struct device_node *,

drivers/clk/sunxi-ng/Kconfig

@@ -71,6 +71,7 @@ config SUN8I_A33_CCU
 config SUN8I_A83T_CCU
 	bool "Support for the Allwinner A83T CCU"
 	default MACH_SUN8I
+	depends on MACH_SUN8I || COMPILE_TEST
 
 config SUN8I_H3_CCU
 	bool "Support for the Allwinner H3 CCU"

drivers/clk/sunxi-ng/ccu-sun4i-a10.c

@@ -1464,7 +1464,7 @@ static void __init sun4i_ccu_init(struct device_node *node,
 	val &= ~GENMASK(7, 6);
 	writel(val | (2 << 6), reg + SUN4I_AHB_REG);
 
-	sunxi_ccu_probe(node, reg, desc);
+	of_sunxi_ccu_probe(node, reg, desc);
 }
 
 static void __init sun4i_a10_ccu_setup(struct device_node *node)

drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c

@@ -196,7 +196,7 @@ static int sun50i_a100_r_ccu_probe(struct platform_device *pdev)
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_r_ccu_desc);
+	return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_a100_r_ccu_desc);
 }
 
 static const struct of_device_id sun50i_a100_r_ccu_ids[] = {
@@ -208,6 +208,7 @@ static struct platform_driver sun50i_a100_r_ccu_driver = {
 	.probe	= sun50i_a100_r_ccu_probe,
 	.driver	= {
 		.name	= "sun50i-a100-r-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun50i_a100_r_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun50i-a100.c

@@ -1247,7 +1247,7 @@ static int sun50i_a100_ccu_probe(struct platform_device *pdev)
 		writel(val, reg + sun50i_a100_usb2_clk_regs[i]);
 	}
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_ccu_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_a100_ccu_desc);
 	if (ret)
 		return ret;
 
@@ -1270,6 +1270,7 @@ static struct platform_driver sun50i_a100_ccu_driver = {
 	.probe	= sun50i_a100_ccu_probe,
 	.driver	= {
 		.name	= "sun50i-a100-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun50i_a100_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun50i-a64.c

@@ -938,13 +938,11 @@ static struct ccu_mux_nb sun50i_a64_cpu_nb = {
 
 static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	void __iomem *reg;
 	u32 val;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -955,7 +953,7 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 
 	writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_a64_ccu_desc);
 	if (ret)
 		return ret;
 
@@ -978,6 +976,7 @@ static struct platform_driver sun50i_a64_ccu_driver = {
 	.probe	= sun50i_a64_ccu_probe,
 	.driver	= {
 		.name	= "sun50i-a64-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun50i_a64_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c

@@ -232,7 +232,7 @@ static void __init sunxi_r_ccu_init(struct device_node *node,
 		return;
 	}
 
-	sunxi_ccu_probe(node, reg, desc);
+	of_sunxi_ccu_probe(node, reg, desc);
 }
 
 static void __init sun50i_h6_r_ccu_setup(struct device_node *node)

drivers/clk/sunxi-ng/ccu-sun50i-h6.c

@@ -1183,13 +1183,11 @@ static const u32 usb2_clk_regs[] = {
 
 static int sun50i_h6_ccu_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	void __iomem *reg;
 	u32 val;
 	int i;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -1240,7 +1238,7 @@ static int sun50i_h6_ccu_probe(struct platform_device *pdev)
 	val |= BIT(24);
 	writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
+	return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc);
 }
 
 static const struct of_device_id sun50i_h6_ccu_ids[] = {
@@ -1252,6 +1250,7 @@ static struct platform_driver sun50i_h6_ccu_driver = {
 	.probe	= sun50i_h6_ccu_probe,
 	.driver	= {
 		.name	= "sun50i-h6-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun50i_h6_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun50i-h616.c

@@ -1141,9 +1141,7 @@ static void __init sun50i_h616_ccu_setup(struct device_node *node)
 	val |= BIT(24);
 	writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG);
 
-	i = sunxi_ccu_probe(node, reg, &sun50i_h616_ccu_desc);
-	if (i)
-		pr_err("%pOF: probing clocks fails: %d\n", node, i);
+	of_sunxi_ccu_probe(node, reg, &sun50i_h616_ccu_desc);
 }
 
 CLK_OF_DECLARE(sun50i_h616_ccu, "allwinner,sun50i-h616-ccu",

drivers/clk/sunxi-ng/ccu-sun5i.c

@@ -1012,7 +1012,7 @@ static void __init sun5i_ccu_init(struct device_node *node,
 	val &= ~GENMASK(7, 6);
 	writel(val | (2 << 6), reg + SUN5I_AHB_REG);
 
-	sunxi_ccu_probe(node, reg, desc);
+	of_sunxi_ccu_probe(node, reg, desc);
 }
 
 static void __init sun5i_a10s_ccu_setup(struct device_node *node)

drivers/clk/sunxi-ng/ccu-sun6i-a31.c

@@ -1257,7 +1257,7 @@ static void __init sun6i_a31_ccu_setup(struct device_node *node)
 	val |= 0x3 << 12;
 	writel(val, reg + SUN6I_A31_AHB1_REG);
 
-	sunxi_ccu_probe(node, reg, &sun6i_a31_ccu_desc);
+	of_sunxi_ccu_probe(node, reg, &sun6i_a31_ccu_desc);
 
 	ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
 				  &sun6i_a31_cpu_nb);

drivers/clk/sunxi-ng/ccu-sun8i-a23.c

@@ -745,7 +745,7 @@ static void __init sun8i_a23_ccu_setup(struct device_node *node)
 	val &= ~BIT(16);
 	writel(val, reg + SUN8I_A23_PLL_MIPI_REG);
 
-	sunxi_ccu_probe(node, reg, &sun8i_a23_ccu_desc);
+	of_sunxi_ccu_probe(node, reg, &sun8i_a23_ccu_desc);
 }
 CLK_OF_DECLARE(sun8i_a23_ccu, "allwinner,sun8i-a23-ccu",
 	       sun8i_a23_ccu_setup);

drivers/clk/sunxi-ng/ccu-sun8i-a33.c

@@ -805,7 +805,7 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 	val &= ~BIT(16);
 	writel(val, reg + SUN8I_A33_PLL_MIPI_REG);
 
-	sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
+	of_sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
 
 	/* Gate then ungate PLL CPU after any rate changes */
 	ccu_pll_notifier_register(&sun8i_a33_pll_cpu_nb);

drivers/clk/sunxi-ng/ccu-sun8i-a83t.c

@@ -887,12 +887,10 @@ static void sun8i_a83t_cpu_pll_fixup(void __iomem *reg)
 
 static int sun8i_a83t_ccu_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	void __iomem *reg;
 	u32 val;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -906,7 +904,7 @@ static int sun8i_a83t_ccu_probe(struct platform_device *pdev)
 	sun8i_a83t_cpu_pll_fixup(reg + SUN8I_A83T_PLL_C0CPUX_REG);
 	sun8i_a83t_cpu_pll_fixup(reg + SUN8I_A83T_PLL_C1CPUX_REG);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun8i_a83t_ccu_desc);
+	return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun8i_a83t_ccu_desc);
 }
 
 static const struct of_device_id sun8i_a83t_ccu_ids[] = {
@@ -918,6 +916,7 @@ static struct platform_driver sun8i_a83t_ccu_driver = {
 	.probe	= sun8i_a83t_ccu_probe,
 	.driver	= {
 		.name	= "sun8i-a83t-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun8i_a83t_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun8i-de2.c

@@ -280,7 +280,6 @@ static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = {
 
 static int sunxi_de2_clk_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct clk *bus_clk, *mod_clk;
 	struct reset_control *rstc;
 	void __iomem *reg;
@@ -291,8 +290,7 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
 	if (!ccu_desc)
 		return -EINVAL;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -342,7 +340,7 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
 		goto err_disable_mod_clk;
 	}
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, ccu_desc);
 	if (ret)
 		goto err_assert_reset;
 

drivers/clk/sunxi-ng/ccu-sun8i-h3.c

@@ -1154,7 +1154,7 @@ static void __init sunxi_h3_h5_ccu_init(struct device_node *node,
 	val &= ~GENMASK(19, 16);
 	writel(val | (0 << 16), reg + SUN8I_H3_PLL_AUDIO_REG);
 
-	sunxi_ccu_probe(node, reg, desc);
+	of_sunxi_ccu_probe(node, reg, desc);
 
 	/* Gate then ungate PLL CPU after any rate changes */
 	ccu_pll_notifier_register(&sun8i_h3_pll_cpu_nb);

drivers/clk/sunxi-ng/ccu-sun8i-r.c

@@ -265,7 +265,7 @@ static void __init sunxi_r_ccu_init(struct device_node *node,
 		return;
 	}
 
-	sunxi_ccu_probe(node, reg, desc);
+	of_sunxi_ccu_probe(node, reg, desc);
 }
 
 static void __init sun8i_a83t_r_ccu_setup(struct device_node *node)

drivers/clk/sunxi-ng/ccu-sun8i-r40.c

@@ -1307,14 +1307,12 @@ static struct regmap_config sun8i_r40_ccu_regmap_config = {
 
 static int sun8i_r40_ccu_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct regmap *regmap;
 	void __iomem *reg;
 	u32 val;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -1346,7 +1344,7 @@ static int sun8i_r40_ccu_probe(struct platform_device *pdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun8i_r40_ccu_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun8i_r40_ccu_desc);
 	if (ret)
 		return ret;
 
@@ -1369,6 +1367,7 @@ static struct platform_driver sun8i_r40_ccu_driver = {
 	.probe	= sun8i_r40_ccu_probe,
 	.driver	= {
 		.name	= "sun8i-r40-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun8i_r40_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun8i-v3s.c

@@ -822,7 +822,7 @@ static void __init sun8i_v3_v3s_ccu_init(struct device_node *node,
 	val &= ~GENMASK(19, 16);
 	writel(val, reg + SUN8I_V3S_PLL_AUDIO_REG);
 
-	sunxi_ccu_probe(node, reg, ccu_desc);
+	of_sunxi_ccu_probe(node, reg, ccu_desc);
 }
 
 static void __init sun8i_v3s_ccu_setup(struct device_node *node)

drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c

@@ -203,14 +203,12 @@ static const struct sunxi_ccu_desc sun9i_a80_de_clk_desc = {
 
 static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct clk *bus_clk;
 	struct reset_control *rstc;
 	void __iomem *reg;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -246,8 +244,7 @@ static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
 		goto err_disable_clk;
 	}
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg,
-			      &sun9i_a80_de_clk_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun9i_a80_de_clk_desc);
 	if (ret)
 		goto err_assert_reset;
 
@@ -269,6 +266,7 @@ static struct platform_driver sun9i_a80_de_clk_driver = {
 	.probe	= sun9i_a80_de_clk_probe,
 	.driver	= {
 		.name	= "sun9i-a80-de-clks",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun9i_a80_de_clk_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c

@@ -92,13 +92,11 @@ static const struct sunxi_ccu_desc sun9i_a80_usb_clk_desc = {
 
 static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct clk *bus_clk;
 	void __iomem *reg;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -117,8 +115,7 @@ static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg,
-			      &sun9i_a80_usb_clk_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun9i_a80_usb_clk_desc);
 	if (ret)
 		goto err_disable_clk;
 

drivers/clk/sunxi-ng/ccu-sun9i-a80.c

@@ -1213,12 +1213,10 @@ static void sun9i_a80_cpu_pll_fixup(void __iomem *reg)
 
 static int sun9i_a80_ccu_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	void __iomem *reg;
 	u32 val;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, res);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
@@ -1231,7 +1229,7 @@ static int sun9i_a80_ccu_probe(struct platform_device *pdev)
 	sun9i_a80_cpu_pll_fixup(reg + SUN9I_A80_PLL_C0CPUX_REG);
 	sun9i_a80_cpu_pll_fixup(reg + SUN9I_A80_PLL_C1CPUX_REG);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun9i_a80_ccu_desc);
+	return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun9i_a80_ccu_desc);
 }
 
 static const struct of_device_id sun9i_a80_ccu_ids[] = {
@@ -1243,6 +1241,7 @@ static struct platform_driver sun9i_a80_ccu_driver = {
 	.probe	= sun9i_a80_ccu_probe,
 	.driver	= {
 		.name	= "sun9i-a80-ccu",
+		.suppress_bind_attrs = true,
 		.of_match_table	= sun9i_a80_ccu_ids,
 	},
 };

drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c

@@ -538,7 +538,7 @@ static void __init suniv_f1c100s_ccu_setup(struct device_node *node)
 	val &= ~GENMASK(19, 16);
 	writel(val | (3 << 16), reg + SUNIV_PLL_AUDIO_REG);
 
-	sunxi_ccu_probe(node, reg, &suniv_ccu_desc);
+	of_sunxi_ccu_probe(node, reg, &suniv_ccu_desc);
 
 	/* Gate then ungate PLL CPU after any rate changes */
 	ccu_pll_notifier_register(&suniv_pll_cpu_nb);

drivers/clk/sunxi-ng/ccu_common.c

@@ -7,6 +7,7 @@
 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/device.h>
 #include <linux/iopoll.h>
 #include <linux/slab.h>
 
@@ -14,7 +15,11 @@
 #include "ccu_gate.h"
 #include "ccu_reset.h"
 
-static DEFINE_SPINLOCK(ccu_lock);
+struct sunxi_ccu {
+	const struct sunxi_ccu_desc	*desc;
+	spinlock_t			lock;
+	struct ccu_reset		reset;
+};
 
 void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock)
 {
@@ -79,12 +84,17 @@ int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb)
 				     &pll_nb->clk_nb);
 }
 
-int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
-		    const struct sunxi_ccu_desc *desc)
+static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev,
+			   struct device_node *node, void __iomem *reg,
+			   const struct sunxi_ccu_desc *desc)
 {
 	struct ccu_reset *reset;
 	int i, ret;
 
+	ccu->desc = desc;
+
+	spin_lock_init(&ccu->lock);
+
 	for (i = 0; i < desc->num_ccu_clks; i++) {
 		struct ccu_common *cclk = desc->ccu_clks[i];
 
@@ -92,7 +102,7 @@ int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 			continue;
 
 		cclk->base = reg;
-		cclk->lock = &ccu_lock;
+		cclk->lock = &ccu->lock;
 	}
 
 	for (i = 0; i < desc->hw_clks->num ; i++) {
@@ -103,7 +113,10 @@ int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 			continue;
 
 		name = hw->init->name;
-		ret = of_clk_hw_register(node, hw);
+		if (dev)
+			ret = clk_hw_register(dev, hw);
+		else
+			ret = of_clk_hw_register(node, hw);
 		if (ret) {
 			pr_err("Couldn't register clock %d - %s\n", i, name);
 			goto err_clk_unreg;
@@ -115,29 +128,22 @@ int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 	if (ret)
 		goto err_clk_unreg;
 
-	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
-	if (!reset) {
-		ret = -ENOMEM;
-		goto err_alloc_reset;
-	}
-
+	reset = &ccu->reset;
 	reset->rcdev.of_node = node;
 	reset->rcdev.ops = &ccu_reset_ops;
-	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.owner = dev ? dev->driver->owner : THIS_MODULE;
 	reset->rcdev.nr_resets = desc->num_resets;
 	reset->base = reg;
-	reset->lock = &ccu_lock;
+	reset->lock = &ccu->lock;
 	reset->reset_map = desc->resets;
 
 	ret = reset_controller_register(&reset->rcdev);
 	if (ret)
-		goto err_of_clk_unreg;
+		goto err_del_provider;
 
 	return 0;
 
-err_of_clk_unreg:
-	kfree(reset);
-err_alloc_reset:
+err_del_provider:
 	of_clk_del_provider(node);
 err_clk_unreg:
 	while (--i >= 0) {
@@ -149,3 +155,59 @@ int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 	}
 	return ret;
 }
+
+static void devm_sunxi_ccu_release(struct device *dev, void *res)
+{
+	struct sunxi_ccu *ccu = res;
+	const struct sunxi_ccu_desc *desc = ccu->desc;
+	int i;
+
+	reset_controller_unregister(&ccu->reset.rcdev);
+	of_clk_del_provider(dev->of_node);
+
+	for (i = 0; i < desc->hw_clks->num; i++) {
+		struct clk_hw *hw = desc->hw_clks->hws[i];
+
+		if (!hw)
+			continue;
+		clk_hw_unregister(hw);
+	}
+}
+
+int devm_sunxi_ccu_probe(struct device *dev, void __iomem *reg,
+			 const struct sunxi_ccu_desc *desc)
+{
+	struct sunxi_ccu *ccu;
+	int ret;
+
+	ccu = devres_alloc(devm_sunxi_ccu_release, sizeof(*ccu), GFP_KERNEL);
+	if (!ccu)
+		return -ENOMEM;
+
+	ret = sunxi_ccu_probe(ccu, dev, dev->of_node, reg, desc);
+	if (ret) {
+		devres_free(ccu);
+		return ret;
+	}
+
+	devres_add(dev, ccu);
+
+	return 0;
+}
+
+void of_sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
+			const struct sunxi_ccu_desc *desc)
+{
+	struct sunxi_ccu *ccu;
+	int ret;
+
+	ccu = kzalloc(sizeof(*ccu), GFP_KERNEL);
+	if (!ccu)
+		return;
+
+	ret = sunxi_ccu_probe(ccu, NULL, node, reg, desc);
+	if (ret) {
+		pr_err("%pOF: probing clocks failed: %d\n", node, ret);
+		kfree(ccu);
+	}
+}

drivers/clk/sunxi-ng/ccu_common.h

@@ -63,7 +63,9 @@ struct ccu_pll_nb {
 
 int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb);
 
-int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
-		    const struct sunxi_ccu_desc *desc);
+int devm_sunxi_ccu_probe(struct device *dev, void __iomem *reg,
+			 const struct sunxi_ccu_desc *desc);
+void of_sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
+			const struct sunxi_ccu_desc *desc);
 
 #endif /* _COMMON_H_ */

drivers/clk/sunxi-ng/ccu_mux.h

@@ -40,7 +40,6 @@ struct ccu_mux_internal {
 	_SUNXI_CCU_MUX_TABLE(_shift, _width, NULL)
 
 struct ccu_mux {
-	u16			reg;
 	u32			enable;
 
 	struct ccu_mux_internal	mux;

drivers/clk/sunxi/clk-mod0.c

@@ -88,14 +88,12 @@ CLK_OF_DECLARE_DRIVER(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk",
 static int sun4i_a10_mod0_clk_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct resource *r;
 	void __iomem *reg;
 
 	if (!np)
 		return -ENODEV;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, r);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 

drivers/clk/sunxi/clk-sun6i-apb0-gates.c

@@ -40,7 +40,6 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev)
 	const struct gates_data *data;
 	const char *clk_parent;
 	const char *clk_name;
-	struct resource *r;
 	void __iomem *reg;
 	int ngates;
 	int i;
@@ -53,8 +52,7 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENODEV;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, r);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 

drivers/clk/sunxi/clk-sun6i-apb0.c

@@ -32,12 +32,10 @@ static int sun6i_a31_apb0_clk_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	const char *clk_name = np->name;
 	const char *clk_parent;
-	struct resource *r;
 	void __iomem *reg;
 	struct clk *clk;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, r);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 

drivers/clk/sunxi/clk-sun6i-ar100.c

@@ -71,12 +71,10 @@ static DEFINE_SPINLOCK(sun6i_ar100_lock);
 static int sun6i_a31_ar100_clk_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct resource *r;
 	void __iomem *reg;
 	struct clk *clk;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, r);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 

drivers/clk/sunxi/clk-sun8i-apb0.c

@@ -87,12 +87,10 @@ CLK_OF_DECLARE_DRIVER(sun8i_a23_apb0, "allwinner,sun8i-a23-apb0-clk",
 static int sun8i_a23_apb0_clk_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct resource *r;
 	void __iomem *reg;
 	struct clk *clk;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg = devm_ioremap_resource(&pdev->dev, r);
+	reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 

include/dt-bindings/clock/exynos850.h

+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * Device Tree binding constants for Exynos850 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_850_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_850_H
+
+/* CMU_TOP */
+#define CLK_FOUT_SHARED0_PLL		1
+#define CLK_FOUT_SHARED1_PLL		2
+#define CLK_FOUT_MMC_PLL		3
+#define CLK_MOUT_SHARED0_PLL		4
+#define CLK_MOUT_SHARED1_PLL		5
+#define CLK_MOUT_MMC_PLL		6
+#define CLK_MOUT_CORE_BUS		7
+#define CLK_MOUT_CORE_CCI		8
+#define CLK_MOUT_CORE_MMC_EMBD		9
+#define CLK_MOUT_CORE_SSS		10
+#define CLK_MOUT_DPU			11
+#define CLK_MOUT_HSI_BUS		12
+#define CLK_MOUT_HSI_MMC_CARD		13
+#define CLK_MOUT_HSI_USB20DRD		14
+#define CLK_MOUT_PERI_BUS		15
+#define CLK_MOUT_PERI_UART		16
+#define CLK_MOUT_PERI_IP		17
+#define CLK_DOUT_SHARED0_DIV3		18
+#define CLK_DOUT_SHARED0_DIV2		19
+#define CLK_DOUT_SHARED1_DIV3		20
+#define CLK_DOUT_SHARED1_DIV2		21
+#define CLK_DOUT_SHARED0_DIV4		22
+#define CLK_DOUT_SHARED1_DIV4		23
+#define CLK_DOUT_CORE_BUS		24
+#define CLK_DOUT_CORE_CCI		25
+#define CLK_DOUT_CORE_MMC_EMBD		26
+#define CLK_DOUT_CORE_SSS		27
+#define CLK_DOUT_DPU			28
+#define CLK_DOUT_HSI_BUS		29
+#define CLK_DOUT_HSI_MMC_CARD		30
+#define CLK_DOUT_HSI_USB20DRD		31
+#define CLK_DOUT_PERI_BUS		32
+#define CLK_DOUT_PERI_UART		33
+#define CLK_DOUT_PERI_IP		34
+#define CLK_GOUT_CORE_BUS		35
+#define CLK_GOUT_CORE_CCI		36
+#define CLK_GOUT_CORE_MMC_EMBD		37
+#define CLK_GOUT_CORE_SSS		38
+#define CLK_GOUT_DPU			39
+#define CLK_GOUT_HSI_BUS		40
+#define CLK_GOUT_HSI_MMC_CARD		41
+#define CLK_GOUT_HSI_USB20DRD		42
+#define CLK_GOUT_PERI_BUS		43
+#define CLK_GOUT_PERI_UART		44
+#define CLK_GOUT_PERI_IP		45
+#define TOP_NR_CLK			46
+
+/* CMU_HSI */
+#define CLK_MOUT_HSI_BUS_USER		1
+#define CLK_MOUT_HSI_MMC_CARD_USER	2
+#define CLK_MOUT_HSI_USB20DRD_USER	3
+#define CLK_MOUT_HSI_RTC		4
+#define CLK_GOUT_USB_RTC_CLK		5
+#define CLK_GOUT_USB_REF_CLK		6
+#define CLK_GOUT_USB_PHY_REF_CLK	7
+#define CLK_GOUT_USB_PHY_ACLK		8
+#define CLK_GOUT_USB_BUS_EARLY_CLK	9
+#define CLK_GOUT_GPIO_HSI_PCLK		10
+#define CLK_GOUT_MMC_CARD_ACLK		11
+#define CLK_GOUT_MMC_CARD_SDCLKIN	12
+#define CLK_GOUT_SYSREG_HSI_PCLK	13
+#define HSI_NR_CLK			14
+
+/* CMU_PERI */
+#define CLK_MOUT_PERI_BUS_USER		1
+#define CLK_MOUT_PERI_UART_USER		2
+#define CLK_MOUT_PERI_HSI2C_USER	3
+#define CLK_MOUT_PERI_SPI_USER		4
+#define CLK_DOUT_PERI_HSI2C0		5
+#define CLK_DOUT_PERI_HSI2C1		6
+#define CLK_DOUT_PERI_HSI2C2		7
+#define CLK_DOUT_PERI_SPI0		8
+#define CLK_GOUT_PERI_HSI2C0		9
+#define CLK_GOUT_PERI_HSI2C1		10
+#define CLK_GOUT_PERI_HSI2C2		11
+#define CLK_GOUT_GPIO_PERI_PCLK		12
+#define CLK_GOUT_HSI2C0_IPCLK		13
+#define CLK_GOUT_HSI2C0_PCLK		14
+#define CLK_GOUT_HSI2C1_IPCLK		15
+#define CLK_GOUT_HSI2C1_PCLK		16
+#define CLK_GOUT_HSI2C2_IPCLK		17
+#define CLK_GOUT_HSI2C2_PCLK		18
+#define CLK_GOUT_I2C0_PCLK		19
+#define CLK_GOUT_I2C1_PCLK		20
+#define CLK_GOUT_I2C2_PCLK		21
+#define CLK_GOUT_I2C3_PCLK		22
+#define CLK_GOUT_I2C4_PCLK		23
+#define CLK_GOUT_I2C5_PCLK		24
+#define CLK_GOUT_I2C6_PCLK		25
+#define CLK_GOUT_MCT_PCLK		26
+#define CLK_GOUT_PWM_MOTOR_PCLK		27
+#define CLK_GOUT_SPI0_IPCLK		28
+#define CLK_GOUT_SPI0_PCLK		29
+#define CLK_GOUT_SYSREG_PERI_PCLK	30
+#define CLK_GOUT_UART_IPCLK		31
+#define CLK_GOUT_UART_PCLK		32
+#define CLK_GOUT_WDT0_PCLK		33
+#define CLK_GOUT_WDT1_PCLK		34
+#define PERI_NR_CLK			35
+
+/* CMU_CORE */
+#define CLK_MOUT_CORE_BUS_USER		1
+#define CLK_MOUT_CORE_CCI_USER		2
+#define CLK_MOUT_CORE_MMC_EMBD_USER	3
+#define CLK_MOUT_CORE_SSS_USER		4
+#define CLK_MOUT_CORE_GIC		5
+#define CLK_DOUT_CORE_BUSP		6
+#define CLK_GOUT_CCI_ACLK		7
+#define CLK_GOUT_GIC_CLK		8
+#define CLK_GOUT_MMC_EMBD_ACLK		9
+#define CLK_GOUT_MMC_EMBD_SDCLKIN	10
+#define CLK_GOUT_SSS_ACLK		11
+#define CLK_GOUT_SSS_PCLK		12
+#define CORE_NR_CLK			13
+
+/* CMU_DPU */
+#define CLK_MOUT_DPU_USER		1
+#define CLK_DOUT_DPU_BUSP		2
+#define CLK_GOUT_DPU_CMU_DPU_PCLK	3
+#define CLK_GOUT_DPU_DECON0_ACLK	4
+#define CLK_GOUT_DPU_DMA_ACLK		5
+#define CLK_GOUT_DPU_DPP_ACLK		6
+#define CLK_GOUT_DPU_PPMU_ACLK		7
+#define CLK_GOUT_DPU_PPMU_PCLK		8
+#define CLK_GOUT_DPU_SMMU_CLK		9
+#define CLK_GOUT_DPU_SYSREG_PCLK	10
+#define DPU_NR_CLK			11
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_850_H */

include/dt-bindings/clock/meson8b-clkc.h

@@ -105,6 +105,16 @@
 #define CLKID_PERIPH		126
 #define CLKID_AXI		128
 #define CLKID_L2_DRAM		130
+#define CLKID_HDMI_PLL_HDMI_OUT	132
+#define CLKID_VID_PLL_FINAL_DIV	137
+#define CLKID_VCLK_IN_SEL	138
+#define CLKID_VCLK2_IN_SEL	149
+#define CLKID_CTS_ENCT		161
+#define CLKID_CTS_ENCP		163
+#define CLKID_CTS_ENCI		165
+#define CLKID_HDMI_TX_PIXEL	167
+#define CLKID_CTS_ENCL		169
+#define CLKID_CTS_VDAC0		171
 #define CLKID_HDMI_SYS		174
 #define CLKID_VPU		190
 #define CLKID_VDEC_1		196