Commit e2d26477 authored by Manuel Lauss's avatar Manuel Lauss Committed by Pierre Ossman

au1xmmc: remove custom carddetect poll implementation.

The MMC core provides a carddetect poll feature, time to
remove the driver's own implementation of it.
Signed-off-by: default avatarManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: default avatarPierre Ossman <drzeus@drzeus.cx>
parent 08fcb720
......@@ -21,7 +21,7 @@
* published by the Free Software Foundation.
*/
/* Why is a timer used to detect insert events?
/* Why don't we use the SD controllers' carddetect feature?
*
* From the AU1100 MMC application guide:
* If the Au1100-based design is intended to support both MultiMediaCards
......@@ -30,8 +30,6 @@
* In doing so, a MMC card never enters SPI-mode communications,
* but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
* (the low to high transition will not occur).
*
* So we use the timer to check the status manually.
*/
#include <linux/module.h>
......@@ -111,7 +109,6 @@ struct au1xmmc_host {
int irq;
struct timer_list timer;
struct tasklet_struct finish_task;
struct tasklet_struct data_task;
struct au1xmmc_platform_data *platdata;
......@@ -198,29 +195,24 @@ static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
host->platdata->set_power(host->mmc, state);
}
static int au1xmmc_card_inserted(struct au1xmmc_host *host)
static int au1xmmc_card_inserted(struct mmc_host *mmc)
{
int ret;
struct au1xmmc_host *host = mmc_priv(mmc);
if (host->platdata && host->platdata->card_inserted)
ret = host->platdata->card_inserted(host->mmc);
else
ret = 1; /* assume there is a card */
return !!host->platdata->card_inserted(host->mmc);
return ret;
return -ENOSYS;
}
static int au1xmmc_card_readonly(struct mmc_host *mmc)
{
struct au1xmmc_host *host = mmc_priv(mmc);
int ret;
if (host->platdata && host->platdata->card_readonly)
ret = host->platdata->card_readonly(mmc);
else
ret = 0; /* assume card is read-write */
return !!host->platdata->card_readonly(mmc);
return ret;
return -ENOSYS;
}
static void au1xmmc_finish_request(struct au1xmmc_host *host)
......@@ -698,7 +690,7 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
host->status = HOST_S_CMD;
/* fail request immediately if no card is present */
if (0 == au1xmmc_card_inserted(host)) {
if (0 == au1xmmc_card_inserted(mmc)) {
mrq->cmd->error = -ENOMEDIUM;
au1xmmc_finish_request(host);
return;
......@@ -935,39 +927,10 @@ static const struct mmc_host_ops au1xmmc_ops = {
.request = au1xmmc_request,
.set_ios = au1xmmc_set_ios,
.get_ro = au1xmmc_card_readonly,
.get_cd = au1xmmc_card_inserted,
.enable_sdio_irq = au1xmmc_enable_sdio_irq,
};
static void au1xmmc_poll_event(unsigned long arg)
{
struct au1xmmc_host *host = (struct au1xmmc_host *)arg;
int card = au1xmmc_card_inserted(host);
int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0;
if (card != controller) {
host->flags &= ~HOST_F_ACTIVE;
if (card)
host->flags |= HOST_F_ACTIVE;
mmc_detect_change(host->mmc, 0);
}
#ifdef DEBUG
if (host->mrq != NULL) {
u32 status = au_readl(HOST_STATUS(host));
DBG("PENDING - %8.8x\n", host->pdev->id, status);
}
#endif
mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
}
static void au1xmmc_init_cd_poll_timer(struct au1xmmc_host *host)
{
init_timer(&host->timer);
host->timer.function = au1xmmc_poll_event;
host->timer.data = (unsigned long)host;
host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT;
}
static int __devinit au1xmmc_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
......@@ -1042,13 +1005,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
if (host->platdata && host->platdata->cd_setup) {
ret = host->platdata->cd_setup(mmc, 1);
if (ret) {
dev_err(&pdev->dev, "board CD setup failed\n");
goto out4;
dev_warn(&pdev->dev, "board CD setup failed\n");
mmc->caps |= MMC_CAP_NEEDS_POLL;
}
} else {
/* poll the board-specific is-card-in-socket-? method */
au1xmmc_init_cd_poll_timer(host);
}
} else
mmc->caps |= MMC_CAP_NEEDS_POLL;
tasklet_init(&host->data_task, au1xmmc_tasklet_data,
(unsigned long)host);
......@@ -1084,10 +1045,6 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mmc);
/* start the carddetect poll timer if necessary */
if (!(host->platdata && host->platdata->cd_setup))
add_timer(&host->timer);
printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
" (mode=%s)\n", pdev->id, host->iobase,
host->flags & HOST_F_DMA ? "dma" : "pio");
......@@ -1112,9 +1069,10 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
if (host->platdata && host->platdata->cd_setup)
if (host->platdata && host->platdata->cd_setup &&
!(mmc->caps & MMC_CAP_NEEDS_POLL))
host->platdata->cd_setup(mmc, 0);
out4:
free_irq(host->irq, host);
out3:
iounmap((void *)host->iobase);
......@@ -1142,10 +1100,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev)
led_classdev_unregister(host->platdata->led);
#endif
if (host->platdata && host->platdata->cd_setup)
if (host->platdata && host->platdata->cd_setup &&
!(mmc->caps & MMC_CAP_NEEDS_POLL))
host->platdata->cd_setup(mmc, 0);
else
del_timer_sync(&host->timer);
au_writel(0, HOST_ENABLE(host));
au_writel(0, HOST_CONFIG(host));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment