Commit e3393645 authored by Stephen Warren's avatar Stephen Warren Committed by Michal Marek

Kbuild: centralize MKIMAGE and cmd_uimage definitions

All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib
to avoid duplication.

All ARCHs have similar definitions of cmd_uimage. Place a sufficiently
parameterized version in Makefile.lib to avoid duplication.
Signed-off-by: default avatarStephen Warren <swarren@wwwdotorg.org>
Acked-by: default avatarNicolas Pitre <nico@linaro.org>
Tested-by: Mike Frysinger <vapier@gentoo.org> [Blackfin]
Tested-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32]
Signed-off-by: default avatarMichal Marek <mmarek@suse.cz>
parent f75a8df3
......@@ -11,8 +11,6 @@
# Copyright (C) 1995-2002 Russell King
#
MKIMAGE := $(srctree)/scripts/mkuboot.sh
ifneq ($(MACHINE),)
include $(srctree)/$(MACHINE)/Makefile.boot
endif
......@@ -69,22 +67,19 @@ $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
clean-files := *.dtb
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
ifeq ($(CONFIG_ZBOOT_ROM),y)
$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
ifneq ($(LOADADDR),)
UIMAGE_LOADADDR=$(LOADADDR)
else
$(obj)/uImage: LOADADDR=$(ZRELADDR)
ifeq ($(CONFIG_ZBOOT_ROM),y)
UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
else
UIMAGE_LOADADDR=$(ZRELADDR)
endif
endif
$(obj)/uImage: STARTADDR=$(LOADADDR)
check_for_multiple_loadaddr = \
if [ $(words $(LOADADDR)) -gt 1 ]; then \
echo 'multiple load addresses: $(LOADADDR)'; \
if [ $(words $(UIMAGE_LOADADDR)) -gt 1 ]; then \
echo 'multiple load addresses: $(UIMAGE_LOADADDR)'; \
echo 'This is incompatible with uImages'; \
echo 'Specify LOADADDR on the commandline to build an uImage'; \
false; \
......
......@@ -6,8 +6,6 @@
# for more details.
#
MKIMAGE := $(srctree)/scripts/mkuboot.sh
extra-y := vmlinux.bin vmlinux.gz
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
......@@ -17,10 +15,9 @@ $(obj)/vmlinux.bin: vmlinux FORCE
$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A avr32 -O linux -T kernel \
-C gzip -a $(CONFIG_LOAD_ADDRESS) -e $(CONFIG_ENTRY_ADDRESS) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
UIMAGE_LOADADDR = $(CONFIG_LOAD_ADDRESS)
UIMAGE_ENTRYADDR = $(CONFIG_ENTRY_ADDRESS)
UIMAGE_COMPRESSION = gzip
targets += uImage uImage.srec
$(obj)/uImage: $(obj)/vmlinux.gz
......
......@@ -6,20 +6,17 @@
# for more details.
#
MKIMAGE := $(srctree)/scripts/mkuboot.sh
targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip
extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip
UIMAGE_OPTS-y :=
UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD)
UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-C $(2) -n '$(CPU_REV)-$(KERNELRELEASE)' \
-e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
$(UIMAGE_OPTS-y) -d $< $@
ifeq ($(CONFIG_RAMKERNEL),y)
UIMAGE_LOADADDR = $(CONFIG_BOOT_LOAD)
else # CONFIG_ROMKERNEL must be set
UIMAGE_LOADADDR = $(CONFIG_ROM_BASE)
endif
UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}')
UIMAGE_NAME = '$(CPU_REV)-$(KERNELRELEASE)'
UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -x
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
......
......@@ -2,8 +2,6 @@
# arch/microblaze/boot/Makefile
#
MKIMAGE := $(srctree)/scripts/mkuboot.sh
obj-y += linked_dtb.o
targets := linux.bin linux.bin.gz simpleImage.%
......@@ -35,11 +33,9 @@ quiet_cmd_strip = STRIP $@
cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
-K _fdt_start vmlinux -o $@
quiet_cmd_uimage = UIMAGE $@.ub
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \
-C none -n 'Linux-$(KERNELRELEASE)' \
-a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \
-d $@ $@.ub
UIMAGE_IN = $@
UIMAGE_OUT = $@.ub
UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR)
$(obj)/simpleImage.%: vmlinux FORCE
$(call if_changed,cp,.unstrip)
......
......@@ -8,8 +8,6 @@
# Copyright (C) 1999 Stuart Menefy
#
MKIMAGE := $(srctree)/scripts/mkuboot.sh
#
# Assign safe dummy values if these variables are not defined,
# in order to suppress error message.
......@@ -61,10 +59,8 @@ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
$(KERNEL_MEMORY) + \
$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
UIMAGE_LOADADDR = $(KERNEL_LOAD)
UIMAGE_ENTRYADDR = $(KERNEL_ENTRY)
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
......
......@@ -5,7 +5,6 @@
ROOT_IMG := /usr/src/root.img
ELFTOAOUT := elftoaout
MKIMAGE := $(srctree)/scripts/mkuboot.sh
hostprogs-y := piggyback btfixupprep
targets := tftpboot.img btfix.o btfix.S image zImage vmlinux.aout
......@@ -92,11 +91,9 @@ $(obj)/image.bin: $(obj)/image FORCE
$(obj)/image.gz: $(obj)/image.bin
$(call if_changed,gzip)
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sparc -O linux -T kernel \
-C gzip -a $(CONFIG_UBOOT_LOAD_ADDR) \
-e $(CONFIG_UBOOT_ENTRY_ADDR) -n 'Linux-$(KERNELRELEASE)' \
-d $< $@
UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR)
UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR)
UIMAGE_COMPRESSION = gzip
quiet_cmd_uimage.o = UIMAGE.O $@
cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \
......
......@@ -11,8 +11,6 @@
# Copyright (C) 2001~2010 GUAN Xue-tao
#
MKIMAGE := $(srctree)/scripts/mkuboot.sh
targets := Image zImage uImage
$(obj)/Image: vmlinux FORCE
......@@ -26,14 +24,8 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A unicore -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
$(obj)/uImage: LOADADDR=0x0
$(obj)/uImage: STARTADDR=$(LOADADDR)
UIMAGE_ARCH = unicore
UIMAGE_LOADADDR = 0x0
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
......
......@@ -304,6 +304,30 @@ cmd_lzo = (cat $(filter-out FORCE,$^) | \
lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
# U-Boot mkimage
# ---------------------------------------------------------------------------
MKIMAGE := $(srctree)/scripts/mkuboot.sh
# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
# the number of overrides in arch makefiles
UIMAGE_ARCH ?= $(SRCARCH)
UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
UIMAGE_OPTS-y ?=
UIMAGE_TYPE ?= kernel
UIMAGE_LOADADDR ?= arch_must_set_this
UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
UIMAGE_IN ?= $<
UIMAGE_OUT ?= $@
quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
-T $(UIMAGE_TYPE) \
-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
# XZ
# ---------------------------------------------------------------------------
# Use xzkern to compress the kernel image and xzmisc to compress other things.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment