ASoC: rt715-sdca: fix clock stop prepare timeout issue

Fix clock stop prepare timeout issue (#2853).
The trigger of internal circuit which belong to
“SDCA preset stuffs” was not set correctly in previous driver,
which could block clock_stop_preparation state.
Add the correct register setting to fix it.

Fixes: 20d17057 ('ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver')
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-12-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt715-sdca-sdw.c

@@ -70,6 +70,7 @@ static bool rt715_sdca_mbq_readable_register(struct device *dev, unsigned int re
 	case 0x2000036:
 	case 0x2000037:
 	case 0x2000039:
+	case 0x2000044:
 	case 0x6100000:
 		return true;
 	default:

sound/soc/codecs/rt715-sdca-sdw.h

@@ -113,6 +113,7 @@ static const struct reg_default rt715_mbq_reg_defaults_sdca[] = {
 	{ 0x2000036, 0x0000 },
 	{ 0x2000037, 0x0000 },
 	{ 0x2000039, 0xaa81 },
+	{ 0x2000044, 0x0202 },
 	{ 0x6100000, 0x0100 },
 	{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC8_9_VOL,
 		RT715_SDCA_FU_VOL_CTRL, CH_01), 0x00 },

sound/soc/codecs/rt715-sdca.c

@@ -1054,6 +1054,9 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave)
 		rt715_sdca_index_update_bits(rt715, RT715_VENDOR_REG,
 			RT715_REV_1, 0x40, 0x40);
 	}
+	/* DFLL Calibration trigger */
+	rt715_sdca_index_update_bits(rt715, RT715_VENDOR_REG,
+			RT715_DFLL_VAD, 0x1, 0x1);
 	/* trigger mode = VAD enable */
 	regmap_write(rt715->regmap,
 		SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_SMPU_TRIG_ST_EN,

sound/soc/codecs/rt715-sdca.h

@@ -81,6 +81,7 @@ struct rt715_sdca_kcontrol_private {
 #define RT715_AD_FUNC_EN				0x36
 #define RT715_REV_1					0x37
 #define RT715_SDW_INPUT_SEL				0x39
+#define RT715_DFLL_VAD					0x44
 #define RT715_EXT_DMIC_CLK_CTRL2			0x54
 
 /* Index (NID:61h) */