[SCSI] bnx2i: Fine tuned conn destroy and context destroy timeout values

Added variables to separate the fine tuned timeout values for
connection destroy and context destroy for both 1g and 10g devices.

v2: Extended the 5771X disconnect timeout from 10s to 20s as the firmware
has a retransmission timeout of 16s.  This fixes one of the iscsi_endpoint
leak issues when the target is slow or non-responsive to our TCP FIN.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/bnx2i/bnx2i.h

@@ -308,6 +308,8 @@ struct iscsi_cid_queue {
  * @dummy_buf_dma:         DMA address of 'dummy_buffer' memory buffer
  * @lock:              	   lock to synchonize access to hba structure
  * @hba_shutdown_tmo:      Timeout value to shutdown each connection
+ * @conn_teardown_tmo:     Timeout value to tear down each connection
+ * @conn_ctx_destroy_tmo:  Timeout value to destroy context of each connection
  * @pci_did:               PCI device ID
  * @pci_vid:               PCI vendor ID
  * @pci_sdid:              PCI subsystem device ID
@@ -387,6 +389,8 @@ struct bnx2i_hba {
 	struct mutex net_dev_lock;/* sync net device access */
 
 	int hba_shutdown_tmo;
+	int conn_teardown_tmo;
+	int conn_ctx_destroy_tmo;
 	/*
 	 * PCI related info.
 	 */

drivers/scsi/bnx2i/bnx2i_iscsi.c

@@ -854,10 +854,15 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
 	spin_lock_init(&hba->lock);
 	mutex_init(&hba->net_dev_lock);
 	init_waitqueue_head(&hba->eh_wait);
-	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
 		hba->hba_shutdown_tmo = 20 * HZ;
-	else	/* 5706/5708/5709 */
+		hba->conn_teardown_tmo = 20 * HZ;
+		hba->conn_ctx_destroy_tmo = 6 * HZ;
+	} else {	/* 5706/5708/5709 */
 		hba->hba_shutdown_tmo = 20 * HZ;
+		hba->conn_teardown_tmo = 10 * HZ;
+		hba->conn_ctx_destroy_tmo = 2 * HZ;
+	}
 
 	if (iscsi_host_add(shost, &hba->pcidev->dev))
 		goto free_dump_mem;
@@ -1633,7 +1638,7 @@ static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 
 	ep->state = EP_STATE_CLEANUP_START;
 	init_timer(&ep->ofld_timer);
-	ep->ofld_timer.expires = 10*HZ + jiffies;
+	ep->ofld_timer.expires = hba->conn_ctx_destroy_tmo + jiffies;
 	ep->ofld_timer.function = bnx2i_ep_ofld_timer;
 	ep->ofld_timer.data = (unsigned long) ep;
 	add_timer(&ep->ofld_timer);
@@ -1937,7 +1942,7 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 	bnx2i_ep->state = EP_STATE_DISCONN_START;
 
 	init_timer(&bnx2i_ep->ofld_timer);
-	bnx2i_ep->ofld_timer.expires = 10*HZ + jiffies;
+	bnx2i_ep->ofld_timer.expires = hba->conn_teardown_tmo + jiffies;
 	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
 	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
 	add_timer(&bnx2i_ep->ofld_timer);