Skip to content

L
linux
Commit e382328a authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'renesas-pinmux2-for-v3.10' of... 

Merge tag 'renesas-pinmux2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc2

Second round of Renesas ARM and SH based SoC pinmux updates for v3.10

Highlights:

* Compilation fixes for sh7269 and for when CONFIG_BUG is not set
* sh-pfc Support for r8a73a4 SoC
* Move GPIOs handling from the PFC device to separate GPIO devices on the r8a7779 SoC

This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc2-for-v3.10

* tag 'renesas-pinmux2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (185 commits)
  sh-pfc: r8a73a4: Remove unused GPIO bias data
  ARM: shmobile: r8a73a4: Remove all GPIO enums
  sh-pfc: r8a73a4: Remove function GPIOs
  ARM: shmobile: r8a73a4: Remove IRQC function GPIOs
  ARM: shmobile: r8a73a4: Remove SCIF function GPIOs
  sh-pfc: r8a73a4: Remove IRQC function GPIOS
  sh-pfc: r8a73a4: Remove SCIF function GPIOS
  sh-pfc: r8a73a4: Add IRQC pin groups and functions
  sh-pfc: r8a73a4: Add SCIF pin groups and functions
  sh-pfc: r8a73a4: Add bias (pull-up/down) pinconf support
  sh-pfc: r8a73a4: GPIO IRQ support
  sh-pfc: r8a73a4: Support sparse GPIO numbers
  sh-pfc: Add r8a73a4 pinmux support
  sh-pfc: r8a7779: Split DU input and output pixel clocks
  sh-pfc: r8a7779: Remove GPIO data
  ARM: shmobile: r8a7779: Register GPIO devices
  sh-pfc: Configure pins as GPIOs at request time when handled externally
  sh-pfc: Skip gpiochip registration when no GPIO resource is found
  sh-pfc: Make GPIO support optional
  sh-pfc: Make function GPIOs support optional
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 2f7053e0 202ac6a2
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 12760 additions and 6012 deletions
Documentation/devicetree/bindings/gpio/gpio.txt
View file @ e382328a
......@@ -98,7 +98,7 @@ announce the pinrange to the pin ctrl subsystem. For example,
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1460 0x18>;
gpio-controller;
gpio-ranges = <&pinctrl1 20 10>, <&pinctrl2 50 20>;
gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
}
......@@ -107,8 +107,8 @@ where,
Next values specify the base pin and number of pins for the range
handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
pin 29 under pinctrl1 and pin 50 to pin 69 under pinctrl2 is handled
by this gpio controller.
pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under
pinctrl2 with gpio offset 10 is handled by this gpio controller.
The pinctrl node must have "#gpio-range-cells" property to show number of
arguments to pass with phandle from gpio controllers node.
Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
View file @ e382328a
One-register-per-pin type device tree based pinctrl driver
Required properties:
- compatible : "pinctrl-single"
- compatible : "pinctrl-single" or "pinconf-single".
"pinctrl-single" means that pinconf isn't supported.
"pinconf-single" means that generic pinconf is supported.
- reg : offset and length of the register set for the mux registers
......@@ -14,9 +16,61 @@ Optional properties:
- pinctrl-single,function-off : function off mode for disabled state if
available and same for all registers; if not specified, disabling of
pin functions is ignored
- pinctrl-single,bit-per-mux : boolean to indicate that one register controls
more than one pin
- pinctrl-single,drive-strength : array of value that are used to configure
drive strength in the pinmux register. They're value of drive strength
current and drive strength mask.
/* drive strength current, mask */
pinctrl-single,power-source = <0x30 0xf0>;
- pinctrl-single,bias-pullup : array of value that are used to configure the
input bias pullup in the pinmux register.
/* input, enabled pullup bits, disabled pullup bits, mask */
pinctrl-single,bias-pullup = <0 1 0 1>;
- pinctrl-single,bias-pulldown : array of value that are used to configure the
input bias pulldown in the pinmux register.
/* input, enabled pulldown bits, disabled pulldown bits, mask */
pinctrl-single,bias-pulldown = <2 2 0 2>;
* Two bits to control input bias pullup and pulldown: User should use
pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means
pullup, and the other one bit means pulldown.
* Three bits to control input bias enable, pullup and pulldown. User should
use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias
enable bit should be included in pullup or pulldown bits.
* Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as
pinctrl-single,bias-disable. Because pinctrl single driver could implement
it by calling pulldown, pullup disabled.
- pinctrl-single,input-schmitt : array of value that are used to configure
input schmitt in the pinmux register. In some silicons, there're two input
schmitt value (rising-edge & falling-edge) in the pinmux register.
/* input schmitt value, mask */
pinctrl-single,input-schmitt = <0x30 0x70>;
- pinctrl-single,input-schmitt-enable : array of value that are used to
configure input schmitt enable or disable in the pinmux register.
/* input, enable bits, disable bits, mask */
pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>;
- pinctrl-single,gpio-range : list of value that are used to configure a GPIO
range. They're value of subnode phandle, pin base in pinctrl device, pin
number in this range, GPIO function value of this GPIO range.
The number of parameters is depend on #pinctrl-single,gpio-range-cells
property.
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
This driver assumes that there is only one register for each pin (unless the
pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
specified in the pinctrl-bindings.txt document in this directory.
......@@ -42,6 +96,20 @@ Where 0xdc is the offset from the pinctrl register base address for the
device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to
be used when applying this change to the register.
Optional sub-node: In case some pins could be configured as GPIO in the pinmux
register, those pins could be defined as a GPIO range. This sub-node is required
by pinctrl-single,gpio-range property.
Required properties in sub-node:
- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in
pinctrl-single,gpio-range property.
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
Example:
/* SoC common file */
......@@ -76,6 +144,29 @@ control_devconf0: pinmux@48002274 {
pinctrl-single,function-mask = <0x5F>;
};
/* third controller instance for pins in gpio domain */
pmx_gpio: pinmux@d401e000 {
compatible = "pinconf-single";
reg = <0xd401e000 0x0330>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <7>;
/* sparse GPIO range could be supported */
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
&range 12 1 0 &range 13 29 1
&range 43 1 0 &range 44 49 1
&range 94 1 1 &range 96 2 1>;
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
};
/* board specific .dts file */
&pmx_core {
......@@ -96,6 +187,15 @@ control_devconf0: pinmux@48002274 {
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x208 0 /* UART0_RXD (IOCFG138) */
0x20c 0 /* UART0_TXD (IOCFG139) */
>;
pinctrl-single,bias-pulldown = <0 2 2>;
pinctrl-single,bias-pullup = <0 1 1>;
};
/* map uart2 pins */
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
......@@ -122,6 +222,11 @@ control_devconf0: pinmux@48002274 {
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
......
arch/arm/boot/dts/spear1310.dtsi
View file @ e382328a
......@@ -89,7 +89,7 @@ gmac4: eth@5c700000 {
pinmux: pinmux@e0700000 {
compatible = "st,spear1310-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
apb {
......@@ -212,7 +212,7 @@ gpiopinctrl: gpio@d8400000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 246>;
gpio-ranges = <&pinmux 0 0 246>;
status = "disabled";
st-plgpio,ngpio = <246>;
......
arch/arm/boot/dts/spear1340.dtsi
View file @ e382328a
......@@ -63,7 +63,7 @@ i2s-rec@b2000000 {
pinmux: pinmux@e0700000 {
compatible = "st,spear1340-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
pwm: pwm@e0180000 {
......@@ -127,7 +127,7 @@ gpiopinctrl: gpio@e2800000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 252>;
gpio-ranges = <&pinmux 0 0 252>;
status = "disabled";
st-plgpio,ngpio = <250>;
......
arch/arm/boot/dts/spear310.dtsi
View file @ e382328a
......@@ -25,7 +25,7 @@ ahb {
pinmux: pinmux@b4000000 {
compatible = "st,spear310-pinmux";
reg = <0xb4000000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
fsmc: flash@44000000 {
......@@ -102,7 +102,7 @@ gpiopinctrl: gpio@b4000000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 102>;
gpio-ranges = <&pinmux 0 0 102>;
status = "disabled";
st-plgpio,ngpio = <102>;
......
arch/arm/boot/dts/spear320.dtsi
View file @ e382328a
......@@ -24,7 +24,7 @@ ahb {
pinmux: pinmux@b3000000 {
compatible = "st,spear320-pinmux";
reg = <0xb3000000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
clcd@90000000 {
......@@ -130,7 +130,7 @@ gpiopinctrl: gpio@b3000000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 102>;
gpio-ranges = <&pinmux 0 0 102>;
status = "disabled";
st-plgpio,ngpio = <102>;
......
arch/arm/mach-shmobile/board-ag5evm.c
View file @ e382328a
......@@ -23,6 +23,8 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
......@@ -304,9 +306,9 @@ static int lcd_backlight_set_brightness(int brightness)
if (brightness == 0) {
/* Reset the chip */
gpio_set_value(GPIO_PORT235, 0);
gpio_set_value(235, 0);
mdelay(24);
gpio_set_value(GPIO_PORT235, 1);
gpio_set_value(235, 1);
return 0;
}
......@@ -406,7 +408,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.cd_gpio = GPIO_PORT251,
.cd_gpio = 251,
};
static struct resource sdhi0_resources[] = {
......@@ -461,7 +463,7 @@ static struct regulator_init_data cn4_power_init_data = {
static struct fixed_voltage_config cn4_power_info = {
.supply_name = "CN4 SD/MMC Vdd",
.microvolts = 3300000,
.gpio = GPIO_PORT114,
.gpio = 114,
.enable_high = 1,
.init_data = &cn4_power_init_data,
};
......@@ -479,10 +481,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
"sdhi1_power");
if (!ret)
power_gpio = GPIO_PORT114;
power_gpio = 114;
}
/*
......@@ -493,7 +495,7 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
* regulator driver. We have to live with the race in case the driver
* gets unloaded and the GPIO freed between these two steps.
*/
gpio_set_value(GPIO_PORT114, state);
gpio_set_value(114, state);
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
......@@ -550,6 +552,77 @@ static struct platform_device *ag5evm_devices[] __initdata = {
&sdhi1_device,
};
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
};
static const struct pinctrl_map ag5evm_pinctrl_map[] = {
/* FSIA */
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_mclk_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_sclk_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_data_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_data_out", "fsia"),
/* I2C2 & I2C3 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0",
"i2c2_0", "i2c2"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
"i2c3_0", "i2c3"),
/* IrDA */
PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0",
"irda_0", "irda"),
/* KEYSC */
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_in8", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out04", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out5", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out6_0", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out7_0", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out8_0", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out9_2", "keysc"),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_in8", pin_pullup_conf),
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_ctrl_0", "mmc0"),
PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"PORT279", pin_pullup_conf),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
"scifa2_data_0", "scifa2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
"scifa2_ctrl_0", "scifa2"),
/* SDHI0 (CN15 [SD I/F]) */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_wp", "sdhi0"),
/* SDHI1 (CN4 [WLAN I/F]) */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"sdhi1_ctrl", "sdhi1"),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"sdhi1_data4", pin_pullup_conf),
PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"PORT263", pin_pullup_conf),
};
static void __init ag5evm_init(void)
{
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
......@@ -558,96 +631,27 @@ static void __init ag5evm_init(void)
ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
pinctrl_register_mappings(ag5evm_pinctrl_map,
ARRAY_SIZE(ag5evm_pinctrl_map));
sh73a0_pinmux_init();
/* enable SCIFA2 */
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
/* enable KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
gpio_request(GPIO_FN_KEYIN1_PU, NULL);
gpio_request(GPIO_FN_KEYIN2_PU, NULL);
gpio_request(GPIO_FN_KEYIN3_PU, NULL);
gpio_request(GPIO_FN_KEYIN4_PU, NULL);
gpio_request(GPIO_FN_KEYIN5_PU, NULL);
gpio_request(GPIO_FN_KEYIN6_PU, NULL);
gpio_request(GPIO_FN_KEYIN7_PU, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT4, NULL);
gpio_request(GPIO_FN_KEYOUT5, NULL);
gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
gpio_request(GPIO_FN_KEYOUT8, NULL);
gpio_request(GPIO_FN_PORT149_KEYOUT9, NULL);
/* enable I2C channel 2 and 3 */
gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
gpio_request(GPIO_FN_PORT248_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT249_I2C_SDA3, NULL);
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* enable SMSC911X */
gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* FSI A */
gpio_request(GPIO_FN_FSIACK, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
/* IrDA */
gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL);
gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL);
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* LCD panel */
gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
gpio_set_value(217, 1);
mdelay(100);
/* LCD backlight controller */
gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
/* enable SDHI0 on CN15 [SD I/F] */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* enable SDHI1 on CN4 [WLAN I/F] */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
......
arch/arm/mach-shmobile/board-ap4evb.c
View file @ e382328a
......@@ -34,6 +34,7 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
......@@ -273,11 +274,11 @@ static struct platform_device smc911x_device = {
/*
* The card detect pin of the top SD/MMC slot (CN7) is active low and is
* connected to GPIO A22 of SH7372 (GPIO_PORT41).
* connected to GPIO A22 of SH7372 (GPIO 41).
*/
static int slot_cn7_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(GPIO_PORT41);
return !gpio_get_value(41);
}
/* MERAM */
static struct sh_mobile_meram_info meram_info = {
......@@ -838,22 +839,22 @@ static struct platform_device fsi_hdmi_device = {
static struct gpio_led ap4evb_leds[] = {
{
.name = "led4",
.gpio = GPIO_PORT185,
.gpio = 185,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led2",
.gpio = GPIO_PORT186,
.gpio = 186,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led3",
.gpio = GPIO_PORT187,
.gpio = 187,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led1",
.gpio = GPIO_PORT188,
.gpio = 188,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}
};
......@@ -1026,10 +1027,10 @@ static void __init hdmi_init_pm_clock(void)
/* TouchScreen */
#ifdef CONFIG_AP4EVB_QHD
# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
# define GPIO_TSC_PORT GPIO_PORT123
# define GPIO_TSC_PORT 123
#else /* WVGA */
# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40
# define GPIO_TSC_PORT GPIO_PORT40
# define GPIO_TSC_PORT 40
#endif
#define IRQ28 evt2irq(0x3380) /* IRQ28A */
......@@ -1084,6 +1085,28 @@ static struct i2c_board_info i2c1_devices[] = {
};
static const struct pinctrl_map ap4evb_pinctrl_map[] = {
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_ctrl_0", "mmc0"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_wp", "sdhi0"),
/* SDHI1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_ctrl", "sdhi1"),
};
#define GPIO_PORT9CR IOMEM(0xE6051009)
#define GPIO_PORT10CR IOMEM(0xE605100A)
#define USCCR1 IOMEM(0xE6058144)
......@@ -1110,6 +1133,8 @@ static void __init ap4evb_init(void)
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
pinctrl_register_mappings(ap4evb_pinctrl_map,
ARRAY_SIZE(ap4evb_pinctrl_map));
sh7372_pinmux_init();
/* enable SCIFA0 */
......@@ -1121,40 +1146,10 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* enable Debug switch (S6) */
gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL);
/* SDHI0 */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
/* MMCIF */
gpio_request(GPIO_FN_MMCD0_0, NULL);
gpio_request(GPIO_FN_MMCD0_1, NULL);
gpio_request(GPIO_FN_MMCD0_2, NULL);
gpio_request(GPIO_FN_MMCD0_3, NULL);
gpio_request(GPIO_FN_MMCD0_4, NULL);
gpio_request(GPIO_FN_MMCD0_5, NULL);
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
/* USB enable */
gpio_request(GPIO_FN_VBUS0_1, NULL);
......@@ -1172,15 +1167,15 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
gpio_request(9, NULL);
gpio_request(10, NULL);
gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
/* card detect pin for MMC slot (CN7) */
gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
gpio_request_one(41, GPIOF_IN, NULL);
/* setup FSI2 port B (HDMI) */
gpio_request(GPIO_FN_FSIBCK, NULL);
......@@ -1268,8 +1263,8 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
......
arch/arm/mach-shmobile/board-bonito.c
View file @ e382328a
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/regulator/fixed.h>
......@@ -288,6 +289,16 @@ static struct platform_device lcdc0_device = {
},
};
static const struct pinctrl_map lcdc0_pinctrl_map[] = {
/* LCD0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
"lcd0_data24_1", "lcd0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
"lcd0_lclk_1", "lcd0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
"lcd0_sync", "lcd0"),
};
/*
* SMSC 9221
*/
......@@ -392,8 +403,8 @@ static void __init bonito_init(void)
/*
* base board settings
*/
gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL);
if (!gpio_get_value(GPIO_PORT176)) {
gpio_request_one(176, GPIOF_IN, NULL);
if (!gpio_get_value(176)) {
u16 bsw2;
u16 bsw3;
u16 bsw4;
......@@ -430,38 +441,11 @@ static void __init bonito_init(void)
*/
if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */
BIT_ON(bsw2, 2)) { /* S38.2 = OFF */
gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
gpio_request(GPIO_FN_LCD0_D0, NULL);
gpio_request(GPIO_FN_LCD0_D1, NULL);
gpio_request(GPIO_FN_LCD0_D2, NULL);
gpio_request(GPIO_FN_LCD0_D3, NULL);
gpio_request(GPIO_FN_LCD0_D4, NULL);
gpio_request(GPIO_FN_LCD0_D5, NULL);
gpio_request(GPIO_FN_LCD0_D6, NULL);
gpio_request(GPIO_FN_LCD0_D7, NULL);
gpio_request(GPIO_FN_LCD0_D8, NULL);
gpio_request(GPIO_FN_LCD0_D9, NULL);
gpio_request(GPIO_FN_LCD0_D10, NULL);
gpio_request(GPIO_FN_LCD0_D11, NULL);
gpio_request(GPIO_FN_LCD0_D12, NULL);
gpio_request(GPIO_FN_LCD0_D13, NULL);
gpio_request(GPIO_FN_LCD0_D14, NULL);
gpio_request(GPIO_FN_LCD0_D15, NULL);
gpio_request(GPIO_FN_LCD0_D16, NULL);
gpio_request(GPIO_FN_LCD0_D17, NULL);
gpio_request(GPIO_FN_LCD0_D18_PORT163, NULL);
gpio_request(GPIO_FN_LCD0_D19_PORT162, NULL);
gpio_request(GPIO_FN_LCD0_D20_PORT161, NULL);
gpio_request(GPIO_FN_LCD0_D21_PORT158, NULL);
gpio_request(GPIO_FN_LCD0_D22_PORT160, NULL);
gpio_request(GPIO_FN_LCD0_D23_PORT159, NULL);
gpio_request(GPIO_FN_LCD0_DCK, NULL);
gpio_request(GPIO_FN_LCD0_VSYN, NULL);
gpio_request(GPIO_FN_LCD0_HSYN, NULL);
gpio_request(GPIO_FN_LCD0_DISP, NULL);
gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH,
pinctrl_register_mappings(lcdc0_pinctrl_map,
ARRAY_SIZE(lcdc0_pinctrl_map));
gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
NULL); /* LCDDON */
/* backlight on */
......
arch/arm/mach-shmobile/board-kota2.c
View file @ e382328a
This diff is collapsed.
arch/arm/mach-shmobile/board-kzm9g.c
View file @ e382328a
......@@ -30,6 +30,8 @@
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
......@@ -433,7 +435,7 @@ static struct sh_mobile_sdhi_info sdhi2_info = {
TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.cd_gpio = GPIO_PORT13,
.cd_gpio = 13,
};
static struct resource sdhi2_resources[] = {
......@@ -599,6 +601,64 @@ static struct platform_device *kzm_devices[] __initdata = {
&fsi_ak4648_device,
};
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
};
static const struct pinctrl_map kzm_pinctrl_map[] = {
/* FSIA (AK4648) */
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_mclk_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_sclk_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_data_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_data_out", "fsia"),
/* I2C3 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
"i2c3_1", "i2c3"),
/* LCD */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
"lcd_data24", "lcd"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
"lcd_sync", "lcd"),
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_ctrl_0", "mmc0"),
PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"PORT279", pin_pullup_conf),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA4 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
"scifa4_data", "scifa4"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
"scifa4_ctrl", "scifa4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_wp", "sdhi0"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
"sdhi2_ctrl", "sdhi2"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
"bsc_cs4", "bsc"),
/* USB */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0",
"usb_vbus", "usb"),
};
/*
* FIXME
*
......@@ -660,100 +720,26 @@ static void __init kzm_init(void)
ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
sh73a0_pinmux_init();
/* enable SCIFA4 */
gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
/* CS4 for SMSC/USB */
gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
sh73a0_pinmux_init();
/* SMSC */
gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
gpio_request(GPIO_FN_LCDD21, NULL);
gpio_request(GPIO_FN_LCDD20, NULL);
gpio_request(GPIO_FN_LCDD19, NULL);
gpio_request(GPIO_FN_LCDD18, NULL);
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
/* Touchscreen */
gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
/* enable SD */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* enable Micro SD */
gpio_request(GPIO_FN_SDHID2_0, NULL);
gpio_request(GPIO_FN_SDHID2_1, NULL);
gpio_request(GPIO_FN_SDHID2_2, NULL);
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* I2C 3 */
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
/* enable FSI2 port A (ak4648) */
gpio_request(GPIO_FN_FSIACK, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
/* enable USB */
gpio_request(GPIO_FN_VBUS_0, NULL);
gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
......
arch/arm/mach-shmobile/board-mackerel.c
View file @ e382328a
......@@ -40,6 +40,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/pinctrl/machine.h>
#include <linux/pm_clock.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
......@@ -363,7 +364,7 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
static int mackerel_set_brightness(int brightness)
{
gpio_set_value(GPIO_PORT31, brightness);
gpio_set_value(31, brightness);
return 0;
}
......@@ -819,22 +820,22 @@ static struct platform_device usbhs1_device = {
static struct gpio_led mackerel_leds[] = {
{
.name = "led0",
.gpio = GPIO_PORT0,
.gpio = 0,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led1",
.gpio = GPIO_PORT1,
.gpio = 1,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led2",
.gpio = GPIO_PORT2,
.gpio = 2,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led3",
.gpio = GPIO_PORT159,
.gpio = 159,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}
};
......@@ -964,11 +965,11 @@ static struct platform_device nand_flash_device = {
/*
* The card detect pin of the top SD/MMC slot (CN7) is active low and is
* connected to GPIO A22 of SH7372 (GPIO_PORT41).
* connected to GPIO A22 of SH7372 (GPIO 41).
*/
static int slot_cn7_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(GPIO_PORT41);
return !gpio_get_value(41);
}
/* SDHI0 */
......@@ -977,7 +978,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.cd_gpio = GPIO_PORT172,
.cd_gpio = 172,
};
static struct resource sdhi0_resources[] = {
......@@ -1060,11 +1061,11 @@ static struct platform_device sdhi1_device = {
/*
* The card detect pin of the top SD/MMC slot (CN23) is active low and is
* connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
* connected to GPIO SCIFB_SCK of SH7372 (162).
*/
static int slot_cn23_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(GPIO_PORT162);
return !gpio_get_value(162);
}
/* SDHI2 */
......@@ -1328,6 +1329,33 @@ static struct i2c_board_info i2c1_devices[] = {
},
};
static const struct pinctrl_map mackerel_pinctrl_map[] = {
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_ctrl_0", "mmc0"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_wp", "sdhi0"),
/* SDHI1 */
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_ctrl", "sdhi1"),
#endif
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
"sdhi2_ctrl", "sdhi2"),
};
#define GPIO_PORT9CR IOMEM(0xE6051009)
#define GPIO_PORT10CR IOMEM(0xE605100A)
#define GPIO_PORT167CR IOMEM(0xE60520A7)
......@@ -1364,6 +1392,8 @@ static void __init mackerel_init(void)
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
pinctrl_register_mappings(mackerel_pinctrl_map,
ARRAY_SIZE(mackerel_pinctrl_map));
sh7372_pinmux_init();
/* enable SCIFA0 */
......@@ -1403,9 +1433,9 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_LCDDCK, NULL);
/* backlight, off by default */
gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL);
gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* USBHS0 */
gpio_request(GPIO_FN_VBUS0_0, NULL);
......@@ -1421,10 +1451,10 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
gpio_request(9, NULL);
gpio_request(10, NULL);
gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
......@@ -1453,52 +1483,14 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_IRQ21, NULL);
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
/* enable SDHI0 */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* SDHI0 PORT172 card-detect IRQ26 */
gpio_request(GPIO_FN_IRQ26_172, NULL);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
#endif
/* card detect pin for MMC slot (CN7) */
gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
/* enable SDHI2 */
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHID2_2, NULL);
gpio_request(GPIO_FN_SDHID2_1, NULL);
gpio_request(GPIO_FN_SDHID2_0, NULL);
gpio_request_one(41, GPIOF_IN, NULL);
/* card detect pin for microSD slot (CN23) */
gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL);
/* MMCIF */
gpio_request(GPIO_FN_MMCD0_0, NULL);
gpio_request(GPIO_FN_MMCD0_1, NULL);
gpio_request(GPIO_FN_MMCD0_2, NULL);
gpio_request(GPIO_FN_MMCD0_3, NULL);
gpio_request(GPIO_FN_MMCD0_4, NULL);
gpio_request(GPIO_FN_MMCD0_5, NULL);
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request_one(162, GPIOF_IN, NULL);
/* FLCTL */
gpio_request(GPIO_FN_D0_NAF0, NULL);
......
arch/arm/mach-shmobile/board-marzen.c
View file @ e382328a
......@@ -25,8 +25,9 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/dma-mapping.h>
#include <linux/pinctrl/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
......@@ -168,12 +169,43 @@ static struct platform_device usb_phy_device = {
.num_resources = ARRAY_SIZE(usb_phy_resources),
};
/* LEDS */
static struct gpio_led marzen_leds[] = {
{
.name = "led2",
.gpio = 157,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led3",
.gpio = 158,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led4",
.gpio = 159,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static struct gpio_led_platform_data marzen_leds_pdata = {
.leds = marzen_leds,
.num_leds = ARRAY_SIZE(marzen_leds),
};
static struct platform_device leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &marzen_leds_pdata,
},
};
static struct platform_device *marzen_devices[] __initdata = {
&eth_device,
&sdhi0_device,
&thermal_device,
&hspi_device,
&usb_phy_device,
&leds_device,
};
/* USB */
......@@ -327,6 +359,41 @@ void __init marzen_init_late(void)
ARRAY_SIZE(marzen_late_devices));
}
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* HSPI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
"hspi0", "hspi0"),
/* SCIF2 (CN18: DEBUG0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
"scif4_data", "scif4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_wp", "sdhi0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"intc_irq1_b", "intc"),
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"lbsc_ex_cs0", "lbsc"),
/* USB0 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
"usb0", "usb0"),
/* USB1 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
"usb1", "usb1"),
/* USB2 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
"usb2", "usb2"),
};
static void __init marzen_init(void)
{
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
......@@ -334,44 +401,10 @@ static void __init marzen_init(void)
regulator_register_fixed(1, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
r8a7779_pinmux_init();
/* SCIF2 (CN18: DEBUG0) */
gpio_request(GPIO_FN_TX2_C, NULL);
gpio_request(GPIO_FN_RX2_C, NULL);
/* SCIF4 (CN19: DEBUG1) */
gpio_request(GPIO_FN_TX4, NULL);
gpio_request(GPIO_FN_RX4, NULL);
/* LAN89218 */
gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
/* SD0 (CN20) */
gpio_request(GPIO_FN_SD0_CLK, NULL);
gpio_request(GPIO_FN_SD0_CMD, NULL);
gpio_request(GPIO_FN_SD0_DAT0, NULL);
gpio_request(GPIO_FN_SD0_DAT1, NULL);
gpio_request(GPIO_FN_SD0_DAT2, NULL);
gpio_request(GPIO_FN_SD0_DAT3, NULL);
gpio_request(GPIO_FN_SD0_CD, NULL);
gpio_request(GPIO_FN_SD0_WP, NULL);
/* HSPI 0 */
gpio_request(GPIO_FN_HSPI_CLK0, NULL);
gpio_request(GPIO_FN_HSPI_CS0, NULL);
gpio_request(GPIO_FN_HSPI_TX0, NULL);
gpio_request(GPIO_FN_HSPI_RX0, NULL);
/* USB (CN21) */
gpio_request(GPIO_FN_USB_OVC0, NULL);
gpio_request(GPIO_FN_USB_OVC1, NULL);
gpio_request(GPIO_FN_USB_OVC2, NULL);
/* USB (CN22) */
gpio_request(GPIO_FN_USB_PENC2, NULL);
r8a7779_add_standard_devices();
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
}
......
arch/arm/mach-shmobile/include/mach/r8a7740.h
View file @ e382328a
......@@ -241,48 +241,9 @@ enum {
/* LCD0 */
GPIO_FN_LCDC0_SELECT,
GPIO_FN_LCD0_D0, GPIO_FN_LCD0_D1, GPIO_FN_LCD0_D2,
GPIO_FN_LCD0_D3, GPIO_FN_LCD0_D4, GPIO_FN_LCD0_D5,
GPIO_FN_LCD0_D6, GPIO_FN_LCD0_D7, GPIO_FN_LCD0_D8,
GPIO_FN_LCD0_D9, GPIO_FN_LCD0_D10, GPIO_FN_LCD0_D11,
GPIO_FN_LCD0_D12, GPIO_FN_LCD0_D13, GPIO_FN_LCD0_D14,
GPIO_FN_LCD0_D15, GPIO_FN_LCD0_D16, GPIO_FN_LCD0_D17,
GPIO_FN_LCD0_DON, GPIO_FN_LCD0_VCPWC, GPIO_FN_LCD0_VEPWC,
GPIO_FN_LCD0_DCK, GPIO_FN_LCD0_VSYN, /* for RGB */
GPIO_FN_LCD0_HSYN, GPIO_FN_LCD0_DISP, /* for RGB */
GPIO_FN_LCD0_WR, GPIO_FN_LCD0_RD, /* for SYS */
GPIO_FN_LCD0_CS, GPIO_FN_LCD0_RS, /* for SYS */
GPIO_FN_LCD0_D18_PORT163, GPIO_FN_LCD0_D19_PORT162,
GPIO_FN_LCD0_D20_PORT161, GPIO_FN_LCD0_D21_PORT158,
GPIO_FN_LCD0_D22_PORT160, GPIO_FN_LCD0_D23_PORT159,
GPIO_FN_LCD0_LCLK_PORT165, /* MSEL5CR_6_1 */
GPIO_FN_LCD0_D18_PORT40, GPIO_FN_LCD0_D19_PORT4,
GPIO_FN_LCD0_D20_PORT3, GPIO_FN_LCD0_D21_PORT2,
GPIO_FN_LCD0_D22_PORT0, GPIO_FN_LCD0_D23_PORT1,
GPIO_FN_LCD0_LCLK_PORT102, /* MSEL5CR_6_0 */
/* LCD1 */
GPIO_FN_LCDC1_SELECT,
GPIO_FN_LCD1_D0, GPIO_FN_LCD1_D1, GPIO_FN_LCD1_D2,
GPIO_FN_LCD1_D3, GPIO_FN_LCD1_D4, GPIO_FN_LCD1_D5,
GPIO_FN_LCD1_D6, GPIO_FN_LCD1_D7, GPIO_FN_LCD1_D8,
GPIO_FN_LCD1_D9, GPIO_FN_LCD1_D10, GPIO_FN_LCD1_D11,
GPIO_FN_LCD1_D12, GPIO_FN_LCD1_D13, GPIO_FN_LCD1_D14,
GPIO_FN_LCD1_D15, GPIO_FN_LCD1_D16, GPIO_FN_LCD1_D17,
GPIO_FN_LCD1_D18, GPIO_FN_LCD1_D19, GPIO_FN_LCD1_D20,
GPIO_FN_LCD1_D21, GPIO_FN_LCD1_D22, GPIO_FN_LCD1_D23,
GPIO_FN_LCD1_DON, GPIO_FN_LCD1_VCPWC,
GPIO_FN_LCD1_LCLK, GPIO_FN_LCD1_VEPWC,
GPIO_FN_LCD1_DCK, GPIO_FN_LCD1_VSYN, /* for RGB */
GPIO_FN_LCD1_HSYN, GPIO_FN_LCD1_DISP, /* for RGB */
GPIO_FN_LCD1_WR, GPIO_FN_LCD1_RD, /* for SYS */
GPIO_FN_LCD1_CS, GPIO_FN_LCD1_RS, /* for SYS */
/* RSPI */
GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A,
......@@ -346,26 +307,6 @@ enum {
GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */
GPIO_FN_SIM_D_PORT199,
/* SDHI0 */
GPIO_FN_SDHI0_D0, GPIO_FN_SDHI0_D1, GPIO_FN_SDHI0_D2,
GPIO_FN_SDHI0_D3, GPIO_FN_SDHI0_CD, GPIO_FN_SDHI0_WP,
GPIO_FN_SDHI0_CMD, GPIO_FN_SDHI0_CLK,
/* SDHI1 */
GPIO_FN_SDHI1_D0, GPIO_FN_SDHI1_D1, GPIO_FN_SDHI1_D2,
GPIO_FN_SDHI1_D3, GPIO_FN_SDHI1_CD, GPIO_FN_SDHI1_WP,
GPIO_FN_SDHI1_CMD, GPIO_FN_SDHI1_CLK,
/* SDHI2 */
GPIO_FN_SDHI2_D0, GPIO_FN_SDHI2_D1, GPIO_FN_SDHI2_D2,
GPIO_FN_SDHI2_D3, GPIO_FN_SDHI2_CLK, GPIO_FN_SDHI2_CMD,
GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */
GPIO_FN_SDHI2_WP_PORT25,
GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */
GPIO_FN_SDHI2_CD_PORT202,
/* MSIOF2 */
GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK,
GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1,
......@@ -417,21 +358,6 @@ enum {
GPIO_FN_MEMC_DREQ1,
GPIO_FN_MEMC_A0,
/* MMC */
GPIO_FN_MMC0_D0_PORT68, GPIO_FN_MMC0_D1_PORT69,
GPIO_FN_MMC0_D2_PORT70, GPIO_FN_MMC0_D3_PORT71,
GPIO_FN_MMC0_D4_PORT72, GPIO_FN_MMC0_D5_PORT73,
GPIO_FN_MMC0_D6_PORT74, GPIO_FN_MMC0_D7_PORT75,
GPIO_FN_MMC0_CLK_PORT66,
GPIO_FN_MMC0_CMD_PORT67, /* MSEL4CR_15_0 */
GPIO_FN_MMC1_D0_PORT149, GPIO_FN_MMC1_D1_PORT148,
GPIO_FN_MMC1_D2_PORT147, GPIO_FN_MMC1_D3_PORT146,
GPIO_FN_MMC1_D4_PORT145, GPIO_FN_MMC1_D5_PORT144,
GPIO_FN_MMC1_D6_PORT143, GPIO_FN_MMC1_D7_PORT142,
GPIO_FN_MMC1_CLK_PORT103,
GPIO_FN_MMC1_CMD_PORT104, /* MSEL4CR_15_1 */
/* MSIOF0 */
GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
......
arch/arm/mach-shmobile/include/mach/sh7372.h
View file @ e382328a
......@@ -294,21 +294,6 @@ enum {
GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, GPIO_FN_D14_NAF14,
GPIO_FN_D15_NAF15,
/*
* MMCIF(1) (PORT 84, 85, 86, 87, 88, 89,
* 90, 91, 92, 99)
*/
GPIO_FN_MMCD0_0, GPIO_FN_MMCD0_1, GPIO_FN_MMCD0_2,
GPIO_FN_MMCD0_3, GPIO_FN_MMCD0_4, GPIO_FN_MMCD0_5,
GPIO_FN_MMCD0_6, GPIO_FN_MMCD0_7,
GPIO_FN_MMCCMD0, GPIO_FN_MMCCLK0,
/* MMCIF(2) (PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
GPIO_FN_MMCD1_0, GPIO_FN_MMCD1_1, GPIO_FN_MMCD1_2,
GPIO_FN_MMCD1_3, GPIO_FN_MMCD1_4, GPIO_FN_MMCD1_5,
GPIO_FN_MMCD1_6, GPIO_FN_MMCD1_7,
GPIO_FN_MMCCLK1, GPIO_FN_MMCCMD1,
/* SPU2 (PORT 65) */
GPIO_FN_VINT_I,
......@@ -416,20 +401,6 @@ enum {
/* HDMI (PORT 169, 170) */
GPIO_FN_HDMI_HPD, GPIO_FN_HDMI_CEC,
/* SDHI0 (PORT 171, 172, 173, 174, 175, 176, 177, 178) */
GPIO_FN_SDHICLK0, GPIO_FN_SDHICD0,
GPIO_FN_SDHICMD0, GPIO_FN_SDHIWP0,
GPIO_FN_SDHID0_0, GPIO_FN_SDHID0_1,
GPIO_FN_SDHID0_2, GPIO_FN_SDHID0_3,
/* SDHI1 (PORT 179, 180, 181, 182, 183, 184) */
GPIO_FN_SDHICLK1, GPIO_FN_SDHICMD1, GPIO_FN_SDHID1_0,
GPIO_FN_SDHID1_1, GPIO_FN_SDHID1_2, GPIO_FN_SDHID1_3,
/* SDHI2 (PORT 185, 186, 187, 188, 189, 190) */
GPIO_FN_SDHICLK2, GPIO_FN_SDHICMD2, GPIO_FN_SDHID2_0,
GPIO_FN_SDHID2_1, GPIO_FN_SDHID2_2, GPIO_FN_SDHID2_3,
/* SDENC see MSEL4CR 19 */
GPIO_FN_SDENC_CPG,
GPIO_FN_SDENC_DV_CLKI,
......
arch/arm/mach-shmobile/setup-r8a7779.c
View file @ e382328a
......@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of_platform.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
......@@ -68,11 +69,6 @@ static struct resource r8a7779_pfc_resources[] = {
.end = 0xfffc023b,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0xffc40000,
.end = 0xffc46fff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device r8a7779_pfc_device = {
......@@ -82,9 +78,59 @@ static struct platform_device r8a7779_pfc_device = {
.num_resources = ARRAY_SIZE(r8a7779_pfc_resources),
};
#define R8A7779_GPIO(idx, npins) \
static struct resource r8a7779_gpio##idx##_resources[] = { \
[0] = { \
.start = 0xffc40000 + 0x1000 * (idx), \
.end = 0xffc4002b + 0x1000 * (idx), \
.flags = IORESOURCE_MEM, \
}, \
[1] = { \
.start = gic_iid(0xad + (idx)), \
.flags = IORESOURCE_IRQ, \
} \
}; \
\
static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = { \
.gpio_base = 32 * (idx), \
.irq_base = 0, \
.number_of_pins = npins, \
.pctl_name = "pfc-r8a7779", \
}; \
\
static struct platform_device r8a7779_gpio##idx##_device = { \
.name = "gpio_rcar", \
.id = idx, \
.resource = r8a7779_gpio##idx##_resources, \
.num_resources = ARRAY_SIZE(r8a7779_gpio##idx##_resources), \
.dev = { \
.platform_data = &r8a7779_gpio##idx##_platform_data, \
}, \
}
R8A7779_GPIO(0, 32);
R8A7779_GPIO(1, 32);
R8A7779_GPIO(2, 32);
R8A7779_GPIO(3, 32);
R8A7779_GPIO(4, 32);
R8A7779_GPIO(5, 32);
R8A7779_GPIO(6, 9);
static struct platform_device *r8a7779_pinctrl_devices[] __initdata = {
&r8a7779_pfc_device,
&r8a7779_gpio0_device,
&r8a7779_gpio1_device,
&r8a7779_gpio2_device,
&r8a7779_gpio3_device,
&r8a7779_gpio4_device,
&r8a7779_gpio5_device,
&r8a7779_gpio6_device,
};
void __init r8a7779_pinmux_init(void)
{
platform_device_register(&r8a7779_pfc_device);
platform_add_devices(r8a7779_pinctrl_devices,
ARRAY_SIZE(r8a7779_pinctrl_devices));
}
static struct plat_sci_port scif0_platform_data = {
......
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
View file @ e382328a
......@@ -8,12 +8,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7203_pfc_resources[] = {
[0] = {
.start = 0xfffe3800,
.end = 0xfffe3a9f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7203", NULL, 0);
return sh_pfc_register("pfc-sh7203", sh7203_pfc_resources,
ARRAY_SIZE(sh7203_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
View file @ e382328a
......@@ -8,12 +8,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7264_pfc_resources[] = {
[0] = {
.start = 0xfffe3800,
.end = 0xfffe393f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7264", NULL, 0);
return sh_pfc_register("pfc-sh7264", sh7264_pfc_resources,
ARRAY_SIZE(sh7264_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
View file @ e382328a
......@@ -9,12 +9,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <cpu/pfc.h>
static struct resource sh7269_pfc_resources[] = {
[0] = {
.start = 0xfffe3800,
.end = 0xfffe391f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7269", NULL, 0);
return sh_pfc_register("pfc-sh7269", sh7269_pfc_resources,
ARRAY_SIZE(sh7269_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
View file @ e382328a
......@@ -8,13 +8,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7720_pfc_resources[] = {
[0] = {
.start = 0xa4050100,
.end = 0xa405016f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7720", NULL, 0);
return sh_pfc_register("pfc-sh7720", sh7720_pfc_resources,
ARRAY_SIZE(sh7720_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
View file @ e382328a
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7722_pfc_resources[] = {
[0] = {
.start = 0xa4050100,
.end = 0xa405018f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7722", NULL, 0);
return sh_pfc_register("pfc-sh7722", sh7722_pfc_resources,
ARRAY_SIZE(sh7722_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
View file @ e382328a
......@@ -8,13 +8,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7723_pfc_resources[] = {
[0] = {
.start = 0xa4050100,
.end = 0xa405016f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7723", NULL, 0);
return sh_pfc_register("pfc-sh7723", sh7723_pfc_resources,
ARRAY_SIZE(sh7723_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
View file @ e382328a
......@@ -13,12 +13,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7724_pfc_resources[] = {
[0] = {
.start = 0xa4050100,
.end = 0xa405016f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7724", NULL, 0);
return sh_pfc_register("pfc-sh7724", sh7724_pfc_resources,
ARRAY_SIZE(sh7724_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
View file @ e382328a
......@@ -13,12 +13,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7757_pfc_resources[] = {
[0] = {
.start = 0xffec0000,
.end = 0xffec008f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7757", NULL, 0);
return sh_pfc_register("pfc-sh7757", sh7757_pfc_resources,
ARRAY_SIZE(sh7757_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
View file @ e382328a
......@@ -8,13 +8,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7785_pfc_resources[] = {
[0] = {
.start = 0xffe70000,
.end = 0xffe7008f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7785", NULL, 0);
return sh_pfc_register("pfc-sh7785", sh7785_pfc_resources,
ARRAY_SIZE(sh7785_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
View file @ e382328a
......@@ -13,13 +13,23 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static struct resource sh7786_pfc_resources[] = {
[0] = {
.start = 0xffcc0000,
.end = 0xffcc008f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-sh7786", NULL, 0);
return sh_pfc_register("pfc-sh7786", sh7786_pfc_resources,
ARRAY_SIZE(sh7786_pfc_resources));
}
arch_initcall(plat_pinmux_setup);
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
View file @ e382328a
......@@ -7,12 +7,23 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <cpu/pfc.h>
static int __init shx3_pinmux_setup(void)
static struct resource shx3_pfc_resources[] = {
[0] = {
.start = 0xffc70000,
.end = 0xffc7001f,
.flags = IORESOURCE_MEM,
},
};
static int __init plat_pinmux_setup(void)
{
return sh_pfc_register("pfc-shx3", NULL, 0);
return sh_pfc_register("pfc-shx3", shx3_pfc_resources,
ARRAY_SIZE(shx3_pfc_resources));
}
arch_initcall(shx3_pinmux_setup);
arch_initcall(plat_pinmux_setup);
drivers/gpio/Kconfig
View file @ e382328a
......@@ -204,6 +204,12 @@ config GPIO_PXA
help
Say yes here to support the PXA GPIO device
config GPIO_RCAR
tristate "Renesas R-Car GPIO"
depends on ARM
help
Say yes here to support GPIO on Renesas R-Car SoCs.
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
......
drivers/gpio/Makefile
View file @ e382328a
......@@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
......
drivers/gpio/gpio-pl061.c
View file @ e382328a
......@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
......@@ -22,6 +23,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/slab.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm.h>
#include <asm/mach/irq.h>
......@@ -51,8 +53,7 @@ struct pl061_gpio {
spinlock_t lock;
void __iomem *base;
int irq_base;
struct irq_chip_generic *irq_gc;
struct irq_domain *domain;
struct gpio_chip gc;
#ifdef CONFIG_PM
......@@ -60,6 +61,17 @@ struct pl061_gpio {
#endif
};
static int pl061_gpio_request(struct gpio_chip *chip, unsigned offset)
{
/*
* Map back to global GPIO space and request muxing, the direction
* parameter does not matter for this controller.
*/
int gpio = chip->base + offset;
return pinctrl_request_gpio(gpio);
}
static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
......@@ -122,24 +134,20 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
if (chip->irq_base <= 0)
return -EINVAL;
return chip->irq_base + offset;
return irq_create_mapping(chip->domain, offset);
}
static int pl061_irq_type(struct irq_data *d, unsigned trigger)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct pl061_gpio *chip = gc->private;
int offset = d->irq - chip->irq_base;
struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
int offset = irqd_to_hwirq(d);
unsigned long flags;
u8 gpiois, gpioibe, gpioiev;
if (offset < 0 || offset >= PL061_GPIO_NR)
return -EINVAL;
raw_spin_lock_irqsave(&gc->lock, flags);
spin_lock_irqsave(&chip->lock, flags);
gpioiev = readb(chip->base + GPIOIEV);
......@@ -168,7 +176,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
writeb(gpioiev, chip->base + GPIOIEV);
raw_spin_unlock_irqrestore(&gc->lock, flags);
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
......@@ -192,31 +200,61 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
chained_irq_exit(irqchip, desc);
}
static void __init pl061_init_gc(struct pl061_gpio *chip, int irq_base)
static void pl061_irq_mask(struct irq_data *d)
{
struct irq_chip_type *ct;
struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
u8 mask = 1 << (irqd_to_hwirq(d) % PL061_GPIO_NR);
u8 gpioie;
spin_lock(&chip->lock);
gpioie = readb(chip->base + GPIOIE) & ~mask;
writeb(gpioie, chip->base + GPIOIE);
spin_unlock(&chip->lock);
}
static void pl061_irq_unmask(struct irq_data *d)
{
struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
u8 mask = 1 << (irqd_to_hwirq(d) % PL061_GPIO_NR);
u8 gpioie;
spin_lock(&chip->lock);
gpioie = readb(chip->base + GPIOIE) | mask;
writeb(gpioie, chip->base + GPIOIE);
spin_unlock(&chip->lock);
}
chip->irq_gc = irq_alloc_generic_chip("gpio-pl061", 1, irq_base,
chip->base, handle_simple_irq);
chip->irq_gc->private = chip;
static struct irq_chip pl061_irqchip = {
.name = "pl061 gpio",
.irq_mask = pl061_irq_mask,
.irq_unmask = pl061_irq_unmask,
.irq_set_type = pl061_irq_type,
};
static int pl061_irq_map(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw)
{
struct pl061_gpio *chip = d->host_data;
ct = chip->irq_gc->chip_types;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_set_type = pl061_irq_type;
ct->chip.irq_set_wake = irq_gc_set_wake;
ct->regs.mask = GPIOIE;
irq_set_chip_and_handler_name(virq, &pl061_irqchip, handle_simple_irq,
"pl061");
irq_set_chip_data(virq, chip);
irq_set_irq_type(virq, IRQ_TYPE_NONE);
irq_setup_generic_chip(chip->irq_gc, IRQ_MSK(PL061_GPIO_NR),
IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
return 0;
}
static const struct irq_domain_ops pl061_domain_ops = {
.map = pl061_irq_map,
.xlate = irq_domain_xlate_twocell,
};
static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
{
struct device *dev = &adev->dev;
struct pl061_platform_data *pdata = dev->platform_data;
struct pl061_gpio *chip;
int ret, irq, i;
int ret, irq, i, irq_base;
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
......@@ -224,24 +262,31 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
if (pdata) {
chip->gc.base = pdata->gpio_base;
chip->irq_base = pdata->irq_base;
} else if (adev->dev.of_node) {
irq_base = pdata->irq_base;
if (irq_base <= 0)
return -ENODEV;
} else {
chip->gc.base = -1;
chip->irq_base = 0;
} else
return -ENODEV;
irq_base = 0;
}
if (!devm_request_mem_region(dev, adev->res.start,
resource_size(&adev->res), "pl061"))
resource_size(&adev->res), "pl061"))
return -EBUSY;
chip->base = devm_ioremap(dev, adev->res.start,
resource_size(&adev->res));
if (chip->base == NULL)
resource_size(&adev->res));
if (!chip->base)
return -ENOMEM;
chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
irq_base, &pl061_domain_ops, chip);
if (!chip->domain)
return -ENODEV;
spin_lock_init(&chip->lock);
chip->gc.request = pl061_gpio_request;
chip->gc.direction_input = pl061_direction_input;
chip->gc.direction_output = pl061_direction_output;
chip->gc.get = pl061_get_value;
......@@ -259,12 +304,6 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
/*
* irq_chip support
*/
if (chip->irq_base <= 0)
return 0;
pl061_init_gc(chip, chip->irq_base);
writeb(0, chip->base + GPIOIE); /* disable irqs */
irq = adev->irq[0];
if (irq < 0)
......
drivers/gpio/gpio-rcar.c 0 → 100644
View file @ e382328a
This diff is collapsed.
drivers/gpio/gpiolib-of.c
View file @ e382328a
......@@ -203,22 +203,11 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip)
if (!pctldev)
break;
/*
* This assumes that the n GPIO pins are consecutive in the
* GPIO number space, and that the pins are also consecutive
* in their local number space. Currently it is not possible
* to add different ranges for one and the same GPIO chip,
* as the code assumes that we have one consecutive range
* on both, mapping 1-to-1.
*
* TODO: make the OF bindings handle multiple sparse ranges
* on the same GPIO chip.
*/
ret = gpiochip_add_pin_range(chip,
pinctrl_dev_get_devname(pctldev),
0, /* offset in gpiochip */
pinspec.args[0],
pinspec.args[1]);
pinspec.args[1],
pinspec.args[2]);
if (ret)
break;
......
drivers/pinctrl/Kconfig
View file @ e382328a
......@@ -166,6 +166,7 @@ config PINCTRL_SINGLE
depends on OF
select PINMUX
select PINCONF
select GENERIC_PINCONF
help
This selects the device tree based generic pinctrl driver.
......
drivers/pinctrl/core.c
View file @ e382328a
......@@ -27,6 +27,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/machine.h>
#include <asm-generic/gpio.h>
#include "core.h"
#include "devicetree.h"
#include "pinmux.h"
......@@ -276,6 +277,39 @@ pinctrl_match_gpio_range(struct pinctrl_dev *pctldev, unsigned gpio)
return NULL;
}
/**
* pinctrl_ready_for_gpio_range() - check if other GPIO pins of
* the same GPIO chip are in range
* @gpio: gpio pin to check taken from the global GPIO pin space
*
* This function is complement of pinctrl_match_gpio_range(). If the return
* value of pinctrl_match_gpio_range() is NULL, this function could be used
* to check whether pinctrl device is ready or not. Maybe some GPIO pins
* of the same GPIO chip don't have back-end pinctrl interface.
* If the return value is true, it means that pinctrl device is ready & the
* certain GPIO pin doesn't have back-end pinctrl device. If the return value
* is false, it means that pinctrl device may not be ready.
*/
static bool pinctrl_ready_for_gpio_range(unsigned gpio)
{
struct pinctrl_dev *pctldev;
struct pinctrl_gpio_range *range = NULL;
struct gpio_chip *chip = gpio_to_chip(gpio);
/* Loop over the pin controllers */
list_for_each_entry(pctldev, &pinctrldev_list, node) {
/* Loop over the ranges */
list_for_each_entry(range, &pctldev->gpio_ranges, node) {
/* Check if any gpio range overlapped with gpio chip */
if (range->base + range->npins - 1 < chip->base ||
range->base > chip->base + chip->ngpio - 1)
continue;
return true;
}
}
return false;
}
/**
* pinctrl_get_device_gpio_range() - find device for GPIO range
* @gpio: the pin to locate the pin controller for
......@@ -443,6 +477,8 @@ int pinctrl_request_gpio(unsigned gpio)
ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
if (ret) {
if (pinctrl_ready_for_gpio_range(gpio))
ret = 0;
mutex_unlock(&pinctrl_mutex);
return ret;
}
......@@ -979,9 +1015,8 @@ static int devm_pinctrl_match(struct device *dev, void *res, void *data)
*/
void devm_pinctrl_put(struct pinctrl *p)
{
WARN_ON(devres_destroy(p->dev, devm_pinctrl_release,
WARN_ON(devres_release(p->dev, devm_pinctrl_release,
devm_pinctrl_match, p));
pinctrl_put(p);
}
EXPORT_SYMBOL_GPL(devm_pinctrl_put);
......
drivers/pinctrl/devicetree.c
View file @ e382328a
......@@ -41,7 +41,7 @@ static void dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
if (pctldev) {
struct pinctrl_ops *ops = pctldev->desc->pctlops;
const struct pinctrl_ops *ops = pctldev->desc->pctlops;
ops->dt_free_map(pctldev, map, num_maps);
} else {
/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
......@@ -122,7 +122,7 @@ static int dt_to_map_one_config(struct pinctrl *p, const char *statename,
{
struct device_node *np_pctldev;
struct pinctrl_dev *pctldev;
struct pinctrl_ops *ops;
const struct pinctrl_ops *ops;
int ret;
struct pinctrl_map *map;
unsigned num_maps;
......
drivers/pinctrl/mvebu/pinctrl-mvebu.c
View file @ e382328a
......@@ -263,7 +263,7 @@ static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
return;
}
static struct pinconf_ops mvebu_pinconf_ops = {
static const struct pinconf_ops mvebu_pinconf_ops = {
.pin_config_group_get = mvebu_pinconf_group_get,
.pin_config_group_set = mvebu_pinconf_group_set,
.pin_config_group_dbg_show = mvebu_pinconf_group_dbg_show,
......@@ -369,7 +369,7 @@ static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
return -ENOTSUPP;
}
static struct pinmux_ops mvebu_pinmux_ops = {
static const struct pinmux_ops mvebu_pinmux_ops = {
.get_functions_count = mvebu_pinmux_get_funcs_count,
.get_function_name = mvebu_pinmux_get_func_name,
.get_function_groups = mvebu_pinmux_get_groups,
......@@ -470,7 +470,7 @@ static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
kfree(map);
}
static struct pinctrl_ops mvebu_pinctrl_ops = {
static const struct pinctrl_ops mvebu_pinctrl_ops = {
.get_groups_count = mvebu_pinctrl_get_groups_count,
.get_group_name = mvebu_pinctrl_get_group_name,
.get_group_pins = mvebu_pinctrl_get_group_pins,
......
drivers/pinctrl/pinconf-generic.c
View file @ e382328a
......@@ -12,6 +12,7 @@
#define pr_fmt(fmt) "generic pinconfig core: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/slab.h>
......@@ -120,4 +121,17 @@ void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
}
}
void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned long config)
{
int i;
for(i = 0; i < ARRAY_SIZE(conf_items); i++) {
if (pinconf_to_config_param(config) != conf_items[i].param)
continue;
seq_printf(s, "%s: 0x%x", conf_items[i].display,
pinconf_to_config_argument(config));
}
}
EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
#endif
drivers/pinctrl/pinconf.c
View file @ e382328a
......@@ -670,7 +670,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d)
struct pinctrl_maps *maps_node;
struct pinctrl_map const *map;
struct pinctrl_dev *pctldev = NULL;
struct pinconf_ops *confops = NULL;
const struct pinconf_ops *confops = NULL;
int i, j;
bool found = false;
......
drivers/pinctrl/pinconf.h
View file @ e382328a
......@@ -98,6 +98,8 @@ void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
struct seq_file *s, const char *gname);
void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned long config);
#else
static inline void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
......@@ -114,4 +116,10 @@ static inline void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
return;
}
static inline void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned long config)
{
return;
}
#endif
drivers/pinctrl/pinctrl-abx500.c
View file @ e382328a
......@@ -656,7 +656,7 @@ static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
{
}
static struct pinmux_ops abx500_pinmux_ops = {
static const struct pinmux_ops abx500_pinmux_ops = {
.get_functions_count = abx500_pmx_get_funcs_cnt,
.get_function_name = abx500_pmx_get_func_name,
.get_function_groups = abx500_pmx_get_func_groups,
......@@ -704,7 +704,7 @@ static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
chip->base + offset - 1);
}
static struct pinctrl_ops abx500_pinctrl_ops = {
static const struct pinctrl_ops abx500_pinctrl_ops = {
.get_groups_count = abx500_get_groups_cnt,
.get_group_name = abx500_get_group_name,
.get_group_pins = abx500_get_group_pins,
......@@ -778,7 +778,7 @@ int abx500_pin_config_set(struct pinctrl_dev *pctldev,
return ret;
}
static struct pinconf_ops abx500_pinconf_ops = {
static const struct pinconf_ops abx500_pinconf_ops = {
.pin_config_get = abx500_pin_config_get,
.pin_config_set = abx500_pin_config_set,
};
......@@ -834,6 +834,7 @@ static const struct of_device_id abx500_gpio_match[] = {
{ .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, },
{ .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, },
{ .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, },
{ }
};
static int abx500_gpio_probe(struct platform_device *pdev)
......
drivers/pinctrl/pinctrl-at91.c
View file @ e382328a
......@@ -294,7 +294,7 @@ static void at91_dt_free_map(struct pinctrl_dev *pctldev,
{
}
static struct pinctrl_ops at91_pctrl_ops = {
static const struct pinctrl_ops at91_pctrl_ops = {
.get_groups_count = at91_get_groups_count,
.get_group_name = at91_get_group_name,
.get_group_pins = at91_get_group_pins,
......@@ -696,7 +696,7 @@ static void at91_gpio_disable_free(struct pinctrl_dev *pctldev,
/* Set the pin to some default state, GPIO is usually default */
}
static struct pinmux_ops at91_pmx_ops = {
static const struct pinmux_ops at91_pmx_ops = {
.get_functions_count = at91_pmx_get_funcs_count,
.get_function_name = at91_pmx_get_func_name,
.get_function_groups = at91_pmx_get_groups,
......@@ -776,7 +776,7 @@ static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
{
}
static struct pinconf_ops at91_pinconf_ops = {
static const struct pinconf_ops at91_pinconf_ops = {
.pin_config_get = at91_pinconf_get,
.pin_config_set = at91_pinconf_set,
.pin_config_dbg_show = at91_pinconf_dbg_show,
......
drivers/pinctrl/pinctrl-bcm2835.c
View file @ e382328a
......@@ -795,7 +795,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
return err;
}
static struct pinctrl_ops bcm2835_pctl_ops = {
static const struct pinctrl_ops bcm2835_pctl_ops = {
.get_groups_count = bcm2835_pctl_get_groups_count,
.get_group_name = bcm2835_pctl_get_group_name,
.get_group_pins = bcm2835_pctl_get_group_pins,
......@@ -872,7 +872,7 @@ static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
return 0;
}
static struct pinmux_ops bcm2835_pmx_ops = {
static const struct pinmux_ops bcm2835_pmx_ops = {
.get_functions_count = bcm2835_pmx_get_functions_count,
.get_function_name = bcm2835_pmx_get_function_name,
.get_function_groups = bcm2835_pmx_get_function_groups,
......@@ -916,7 +916,7 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
return 0;
}
static struct pinconf_ops bcm2835_pinconf_ops = {
static const struct pinconf_ops bcm2835_pinconf_ops = {
.pin_config_get = bcm2835_pinconf_get,
.pin_config_set = bcm2835_pinconf_set,
};
......
drivers/pinctrl/pinctrl-exynos5440.c
View file @ e382328a
......@@ -286,7 +286,7 @@ static void exynos5440_dt_free_map(struct pinctrl_dev *pctldev,
}
/* list of pinctrl callbacks for the pinctrl core */
static struct pinctrl_ops exynos5440_pctrl_ops = {
static const struct pinctrl_ops exynos5440_pctrl_ops = {
.get_groups_count = exynos5440_get_group_count,
.get_group_name = exynos5440_get_group_name,
.get_group_pins = exynos5440_get_group_pins,
......@@ -374,7 +374,7 @@ static int exynos5440_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
}
/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
static struct pinmux_ops exynos5440_pinmux_ops = {
static const struct pinmux_ops exynos5440_pinmux_ops = {
.get_functions_count = exynos5440_get_functions_count,
.get_function_name = exynos5440_pinmux_get_fname,
.get_function_groups = exynos5440_pinmux_get_groups,
......@@ -523,7 +523,7 @@ static int exynos5440_pinconf_group_get(struct pinctrl_dev *pctldev,
}
/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
static struct pinconf_ops exynos5440_pinconf_ops = {
static const struct pinconf_ops exynos5440_pinconf_ops = {
.pin_config_get = exynos5440_pinconf_get,
.pin_config_set = exynos5440_pinconf_set,
.pin_config_group_get = exynos5440_pinconf_group_get,
......
drivers/pinctrl/pinctrl-falcon.c
View file @ e382328a
......@@ -353,7 +353,7 @@ static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
{
}
static struct pinconf_ops falcon_pinconf_ops = {
static const struct pinconf_ops falcon_pinconf_ops = {
.pin_config_get = falcon_pinconf_get,
.pin_config_set = falcon_pinconf_set,
.pin_config_group_get = falcon_pinconf_group_get,
......
drivers/pinctrl/pinctrl-imx.c
View file @ e382328a
......@@ -207,7 +207,7 @@ static void imx_dt_free_map(struct pinctrl_dev *pctldev,
kfree(map);
}
static struct pinctrl_ops imx_pctrl_ops = {
static const struct pinctrl_ops imx_pctrl_ops = {
.get_groups_count = imx_get_groups_count,
.get_group_name = imx_get_group_name,
.get_group_pins = imx_get_group_pins,
......@@ -299,7 +299,7 @@ static int imx_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
static struct pinmux_ops imx_pmx_ops = {
static const struct pinmux_ops imx_pmx_ops = {
.get_functions_count = imx_pmx_get_funcs_count,
.get_function_name = imx_pmx_get_func_name,
.get_function_groups = imx_pmx_get_groups,
......@@ -397,7 +397,7 @@ static void imx_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
}
}
static struct pinconf_ops imx_pinconf_ops = {
static const struct pinconf_ops imx_pinconf_ops = {
.pin_config_get = imx_pinconf_get,
.pin_config_set = imx_pinconf_set,
.pin_config_dbg_show = imx_pinconf_dbg_show,
......
drivers/pinctrl/pinctrl-lantiq.c
View file @ e382328a
......@@ -169,7 +169,7 @@ static int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
return 0;
}
static struct pinctrl_ops ltq_pctrl_ops = {
static const struct pinctrl_ops ltq_pctrl_ops = {
.get_groups_count = ltq_get_group_count,
.get_group_name = ltq_get_group_name,
.get_group_pins = ltq_get_group_pins,
......@@ -311,7 +311,7 @@ static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev,
return info->apply_mux(pctrldev, mfp, pin_func);
}
static struct pinmux_ops ltq_pmx_ops = {
static const struct pinmux_ops ltq_pmx_ops = {
.get_functions_count = ltq_pmx_func_count,
.get_function_name = ltq_pmx_func_name,
.get_function_groups = ltq_pmx_get_groups,
......
drivers/pinctrl/pinctrl-mxs.c
View file @ e382328a
......@@ -158,7 +158,7 @@ static void mxs_dt_free_map(struct pinctrl_dev *pctldev,
kfree(map);
}
static struct pinctrl_ops mxs_pinctrl_ops = {
static const struct pinctrl_ops mxs_pinctrl_ops = {
.get_groups_count = mxs_get_groups_count,
.get_group_name = mxs_get_group_name,
.get_group_pins = mxs_get_group_pins,
......@@ -219,7 +219,7 @@ static int mxs_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
static struct pinmux_ops mxs_pinmux_ops = {
static const struct pinmux_ops mxs_pinmux_ops = {
.get_functions_count = mxs_pinctrl_get_funcs_count,
.get_function_name = mxs_pinctrl_get_func_name,
.get_function_groups = mxs_pinctrl_get_func_groups,
......@@ -319,7 +319,7 @@ static void mxs_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
seq_printf(s, "0x%lx", config);
}
static struct pinconf_ops mxs_pinconf_ops = {
static const struct pinconf_ops mxs_pinconf_ops = {
.pin_config_get = mxs_pinconf_get,
.pin_config_set = mxs_pinconf_set,
.pin_config_group_get = mxs_pinconf_group_get,
......
drivers/pinctrl/pinctrl-nomadik.c
View file @ e382328a
......@@ -1764,7 +1764,7 @@ int nmk_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
return 0;
}
static struct pinctrl_ops nmk_pinctrl_ops = {
static const struct pinctrl_ops nmk_pinctrl_ops = {
.get_groups_count = nmk_get_groups_cnt,
.get_group_name = nmk_get_group_name,
.get_group_pins = nmk_get_group_pins,
......@@ -1975,7 +1975,7 @@ static void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
/* Set the pin to some default state, GPIO is usually default */
}
static struct pinmux_ops nmk_pinmux_ops = {
static const struct pinmux_ops nmk_pinmux_ops = {
.get_functions_count = nmk_pmx_get_funcs_cnt,
.get_function_name = nmk_pmx_get_func_name,
.get_function_groups = nmk_pmx_get_func_groups,
......@@ -2089,7 +2089,7 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
return 0;
}
static struct pinconf_ops nmk_pinconf_ops = {
static const struct pinconf_ops nmk_pinconf_ops = {
.pin_config_get = nmk_pin_config_get,
.pin_config_set = nmk_pin_config_set,
};
......
drivers/pinctrl/pinctrl-pxa3xx.c
View file @ e382328a
......@@ -53,7 +53,7 @@ static int pxa3xx_get_group_pins(struct pinctrl_dev *pctrldev,
return 0;
}
static struct pinctrl_ops pxa3xx_pctrl_ops = {
static const struct pinctrl_ops pxa3xx_pctrl_ops = {
.get_groups_count = pxa3xx_get_groups_count,
.get_group_name = pxa3xx_get_group_name,
.get_group_pins = pxa3xx_get_group_pins,
......@@ -161,7 +161,7 @@ static int pxa3xx_pmx_request_gpio(struct pinctrl_dev *pctrldev,
return 0;
}
static struct pinmux_ops pxa3xx_pmx_ops = {
static const struct pinmux_ops pxa3xx_pmx_ops = {
.get_functions_count = pxa3xx_pmx_get_funcs_count,
.get_function_name = pxa3xx_pmx_get_func_name,
.get_function_groups = pxa3xx_pmx_get_groups,
......
drivers/pinctrl/pinctrl-samsung.c
View file @ e382328a
......@@ -214,7 +214,7 @@ static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
}
/* list of pinctrl callbacks for the pinctrl core */
static struct pinctrl_ops samsung_pctrl_ops = {
static const struct pinctrl_ops samsung_pctrl_ops = {
.get_groups_count = samsung_get_group_count,
.get_group_name = samsung_get_group_name,
.get_group_pins = samsung_get_group_pins,
......@@ -357,7 +357,7 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
}
/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
static struct pinmux_ops samsung_pinmux_ops = {
static const struct pinmux_ops samsung_pinmux_ops = {
.get_functions_count = samsung_get_functions_count,
.get_function_name = samsung_pinmux_get_fname,
.get_function_groups = samsung_pinmux_get_groups,
......@@ -468,7 +468,7 @@ static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
}
/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
static struct pinconf_ops samsung_pinconf_ops = {
static const struct pinconf_ops samsung_pinconf_ops = {
.pin_config_get = samsung_pinconf_get,
.pin_config_set = samsung_pinconf_set,
.pin_config_group_get = samsung_pinconf_group_get,
......
drivers/pinctrl/pinctrl-single.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/pinctrl-sirf.c
View file @ e382328a
......@@ -979,7 +979,7 @@ static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev,
kfree(map);
}
static struct pinctrl_ops sirfsoc_pctrl_ops = {
static const struct pinctrl_ops sirfsoc_pctrl_ops = {
.get_groups_count = sirfsoc_get_groups_count,
.get_group_name = sirfsoc_get_group_name,
.get_group_pins = sirfsoc_get_group_pins,
......@@ -1181,7 +1181,7 @@ static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev,
return 0;
}
static struct pinmux_ops sirfsoc_pinmux_ops = {
static const struct pinmux_ops sirfsoc_pinmux_ops = {
.enable = sirfsoc_pinmux_enable,
.disable = sirfsoc_pinmux_disable,
.get_functions_count = sirfsoc_pinmux_get_funcs_count,
......
drivers/pinctrl/pinctrl-sunxi.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/pinctrl-tegra.c
View file @ e382328a
......@@ -316,7 +316,7 @@ static int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
return 0;
}
static struct pinctrl_ops tegra_pinctrl_ops = {
static const struct pinctrl_ops tegra_pinctrl_ops = {
.get_groups_count = tegra_pinctrl_get_groups_count,
.get_group_name = tegra_pinctrl_get_group_name,
.get_group_pins = tegra_pinctrl_get_group_pins,
......@@ -401,7 +401,7 @@ static void tegra_pinctrl_disable(struct pinctrl_dev *pctldev,
pmx_writel(pmx, val, g->mux_bank, g->mux_reg);
}
static struct pinmux_ops tegra_pinmux_ops = {
static const struct pinmux_ops tegra_pinmux_ops = {
.get_functions_count = tegra_pinctrl_get_funcs_count,
.get_function_name = tegra_pinctrl_get_func_name,
.get_function_groups = tegra_pinctrl_get_func_groups,
......@@ -676,7 +676,7 @@ static void tegra_pinconf_config_dbg_show(struct pinctrl_dev *pctldev,
}
#endif
static struct pinconf_ops tegra_pinconf_ops = {
static const struct pinconf_ops tegra_pinconf_ops = {
.pin_config_get = tegra_pinconf_get,
.pin_config_set = tegra_pinconf_set,
.pin_config_group_get = tegra_pinconf_group_get,
......
drivers/pinctrl/pinctrl-u300.c
View file @ e382328a
......@@ -860,7 +860,7 @@ static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
seq_printf(s, " " DRIVER_NAME);
}
static struct pinctrl_ops u300_pctrl_ops = {
static const struct pinctrl_ops u300_pctrl_ops = {
.get_groups_count = u300_get_groups_count,
.get_group_name = u300_get_group_name,
.get_group_pins = u300_get_group_pins,
......@@ -1003,7 +1003,7 @@ static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
static struct pinmux_ops u300_pmx_ops = {
static const struct pinmux_ops u300_pmx_ops = {
.get_functions_count = u300_pmx_get_funcs_count,
.get_function_name = u300_pmx_get_func_name,
.get_function_groups = u300_pmx_get_groups,
......@@ -1046,7 +1046,7 @@ static int u300_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
return 0;
}
static struct pinconf_ops u300_pconf_ops = {
static const struct pinconf_ops u300_pconf_ops = {
.is_generic = true,
.pin_config_get = u300_pin_config_get,
.pin_config_set = u300_pin_config_set,
......
drivers/pinctrl/pinctrl-xway.c
View file @ e382328a
......@@ -553,7 +553,7 @@ int xway_pinconf_group_set(struct pinctrl_dev *pctldev,
return ret;
}
static struct pinconf_ops xway_pinconf_ops = {
static const struct pinconf_ops xway_pinconf_ops = {
.pin_config_get = xway_pinconf_get,
.pin_config_set = xway_pinconf_set,
.pin_config_group_set = xway_pinconf_group_set,
......
drivers/pinctrl/sh-pfc/Kconfig
View file @ e382328a
......@@ -10,6 +10,7 @@ config PINCTRL_SH_PFC
select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
select PINMUX
select PINCONF
select GENERIC_PINCONF
def_bool y
help
This enables pin control drivers for SH and SH Mobile platforms
......@@ -21,6 +22,11 @@ config GPIO_SH_PFC
This enables support for GPIOs within the SoC's pin function
controller.
config PINCTRL_PFC_R8A73A4
def_bool y
depends on ARCH_R8A73A4
select PINCTRL_SH_PFC
config PINCTRL_PFC_R8A7740
def_bool y
depends on ARCH_R8A7740
......
drivers/pinctrl/sh-pfc/Makefile
View file @ e382328a
......@@ -3,6 +3,7 @@ ifeq ($(CONFIG_GPIO_SH_PFC),y)
sh-pfc-objs += gpio.o
endif
obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o
obj-$(CONFIG_PINCTRL_PFC_R8A73A4) += pfc-r8a73a4.o
obj-$(CONFIG_PINCTRL_PFC_R8A7740) += pfc-r8a7740.o
obj-$(CONFIG_PINCTRL_PFC_R8A7779) += pfc-r8a7779.o
obj-$(CONFIG_PINCTRL_PFC_SH7203) += pfc-sh7203.o
......
drivers/pinctrl/sh-pfc/core.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/core.h
View file @ e382328a
......@@ -26,13 +26,17 @@ struct sh_pfc_pinctrl;
struct sh_pfc {
struct device *dev;
struct sh_pfc_soc_info *info;
const struct sh_pfc_soc_info *info;
spinlock_t lock;
unsigned int num_windows;
struct sh_pfc_window *window;
unsigned int nr_pins;
struct sh_pfc_chip *gpio;
struct sh_pfc_chip *func;
struct sh_pfc_pinctrl *pinctrl;
};
......@@ -42,31 +46,30 @@ int sh_pfc_unregister_gpiochip(struct sh_pfc *pfc);
int sh_pfc_register_pinctrl(struct sh_pfc *pfc);
int sh_pfc_unregister_pinctrl(struct sh_pfc *pfc);
int sh_pfc_read_bit(struct pinmux_data_reg *dr, unsigned long in_pos);
void sh_pfc_write_bit(struct pinmux_data_reg *dr, unsigned long in_pos,
unsigned long value);
int sh_pfc_get_data_reg(struct sh_pfc *pfc, unsigned gpio,
struct pinmux_data_reg **drp, int *bitp);
int sh_pfc_gpio_to_enum(struct sh_pfc *pfc, unsigned gpio, int pos,
pinmux_enum_t *enum_idp);
int sh_pfc_config_gpio(struct sh_pfc *pfc, unsigned gpio, int pinmux_type,
int cfg_mode);
unsigned long sh_pfc_read_raw_reg(void __iomem *mapped_reg,
unsigned long reg_width);
void sh_pfc_write_raw_reg(void __iomem *mapped_reg, unsigned long reg_width,
unsigned long data);
int sh_pfc_get_pin_index(struct sh_pfc *pfc, unsigned int pin);
int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type);
extern struct sh_pfc_soc_info r8a7740_pinmux_info;
extern struct sh_pfc_soc_info r8a7779_pinmux_info;
extern struct sh_pfc_soc_info sh7203_pinmux_info;
extern struct sh_pfc_soc_info sh7264_pinmux_info;
extern struct sh_pfc_soc_info sh7269_pinmux_info;
extern struct sh_pfc_soc_info sh7372_pinmux_info;
extern struct sh_pfc_soc_info sh73a0_pinmux_info;
extern struct sh_pfc_soc_info sh7720_pinmux_info;
extern struct sh_pfc_soc_info sh7722_pinmux_info;
extern struct sh_pfc_soc_info sh7723_pinmux_info;
extern struct sh_pfc_soc_info sh7724_pinmux_info;
extern struct sh_pfc_soc_info sh7734_pinmux_info;
extern struct sh_pfc_soc_info sh7757_pinmux_info;
extern struct sh_pfc_soc_info sh7785_pinmux_info;
extern struct sh_pfc_soc_info sh7786_pinmux_info;
extern struct sh_pfc_soc_info shx3_pinmux_info;
extern const struct sh_pfc_soc_info r8a73a4_pinmux_info;
extern const struct sh_pfc_soc_info r8a7740_pinmux_info;
extern const struct sh_pfc_soc_info r8a7779_pinmux_info;
extern const struct sh_pfc_soc_info sh7203_pinmux_info;
extern const struct sh_pfc_soc_info sh7264_pinmux_info;
extern const struct sh_pfc_soc_info sh7269_pinmux_info;
extern const struct sh_pfc_soc_info sh7372_pinmux_info;
extern const struct sh_pfc_soc_info sh73a0_pinmux_info;
extern const struct sh_pfc_soc_info sh7720_pinmux_info;
extern const struct sh_pfc_soc_info sh7722_pinmux_info;
extern const struct sh_pfc_soc_info sh7723_pinmux_info;
extern const struct sh_pfc_soc_info sh7724_pinmux_info;
extern const struct sh_pfc_soc_info sh7734_pinmux_info;
extern const struct sh_pfc_soc_info sh7757_pinmux_info;
extern const struct sh_pfc_soc_info sh7785_pinmux_info;
extern const struct sh_pfc_soc_info sh7786_pinmux_info;
extern const struct sh_pfc_soc_info shx3_pinmux_info;
#endif /* __SH_PFC_CORE_H__ */
drivers/pinctrl/sh-pfc/gpio.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c 0 → 100644
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a7740.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a7779.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7203.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7264.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7269.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7372.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh73a0.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7720.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7722.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7723.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7724.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7734.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7757.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7785.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7786.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-shx3.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/pinctrl.c
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/sh-pfc/sh_pfc.h
View file @ e382328a
This diff is collapsed.
drivers/pinctrl/spear/pinctrl-spear.c
View file @ e382328a
......@@ -198,7 +198,7 @@ static void spear_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
kfree(map);
}
static struct pinctrl_ops spear_pinctrl_ops = {
static const struct pinctrl_ops spear_pinctrl_ops = {
.get_groups_count = spear_pinctrl_get_groups_cnt,
.get_group_name = spear_pinctrl_get_group_name,
.get_group_pins = spear_pinctrl_get_group_pins,
......@@ -340,7 +340,7 @@ static void gpio_disable_free(struct pinctrl_dev *pctldev,
gpio_request_endisable(pctldev, range, offset, false);
}
static struct pinmux_ops spear_pinmux_ops = {
static const struct pinmux_ops spear_pinmux_ops = {
.get_functions_count = spear_pinctrl_get_funcs_count,
.get_function_name = spear_pinctrl_get_func_name,
.get_function_groups = spear_pinctrl_get_func_groups,
......
include/linux/pinctrl/pinctrl.h
View file @ e382328a
......@@ -118,9 +118,9 @@ struct pinctrl_desc {
const char *name;
struct pinctrl_pin_desc const *pins;
unsigned int npins;
struct pinctrl_ops *pctlops;
struct pinmux_ops *pmxops;
struct pinconf_ops *confops;
const struct pinctrl_ops *pctlops;
const struct pinmux_ops *pmxops;
const struct pinconf_ops *confops;
struct module *owner;
};
......
include/linux/platform_data/gpio-rcar.h 0 → 100644
View file @ e382328a
/*
* Renesas R-Car GPIO Support
*
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __GPIO_RCAR_H__
#define __GPIO_RCAR_H__
struct gpio_rcar_config {
unsigned int gpio_base;
unsigned int irq_base;
unsigned int number_of_pins;
const char *pctl_name;
};
#endif /* __GPIO_RCAR_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7