Commit e383b127 authored by Nicholas Kazlauskas's avatar Nicholas Kazlauskas Committed by Alex Deucher

drm/amd/display: Move DCN314 DOMAIN power control to DMCUB

[Why]
DOMAIN power gating control is now required to be done via firmware
due to interlock with other power features. This is to avoid
intermittent issues in the LB memories.

[How]
If the firmware supports the command then use the new firmware as
the sequence can avoid potential display corruption issues.

The command will be ignored on firmware that does not support DOMAIN
power control and the pipes will remain always on - frequent PG cycling
can cause the issue to occur on the old sequence, so we should avoid it.
Reviewed-by: default avatarHansen Dsouza <hansen.dsouza@amd.com>
Acked-by: default avatarQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: default avatarNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: default avatarDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 230dd6bb
......@@ -389,3 +389,27 @@ void dcn314_set_pixels_per_cycle(struct pipe_ctx *pipe_ctx)
pipe_ctx->stream_res.stream_enc->funcs->set_input_mode(pipe_ctx->stream_res.stream_enc,
pix_per_cycle);
}
void dcn314_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool power_on)
{
struct dc_context *ctx = hws->ctx;
union dmub_rb_cmd cmd;
if (hws->ctx->dc->debug.disable_hubp_power_gate)
return;
PERF_TRACE();
memset(&cmd, 0, sizeof(cmd));
cmd.domain_control.header.type = DMUB_CMD__VBIOS;
cmd.domain_control.header.sub_type = DMUB_CMD__VBIOS_DOMAIN_CONTROL;
cmd.domain_control.header.payload_bytes = sizeof(cmd.domain_control.data);
cmd.domain_control.data.inst = hubp_inst;
cmd.domain_control.data.power_gate = !power_on;
dc_dmub_srv_cmd_queue(ctx->dmub_srv, &cmd);
dc_dmub_srv_cmd_execute(ctx->dmub_srv);
dc_dmub_srv_wait_idle(ctx->dmub_srv);
PERF_TRACE();
}
......@@ -41,4 +41,6 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
void dcn314_set_pixels_per_cycle(struct pipe_ctx *pipe_ctx);
void dcn314_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool power_on);
#endif /* __DC_HWSS_DCN314_H__ */
......@@ -137,7 +137,7 @@ static const struct hwseq_private_funcs dcn314_private_funcs = {
.plane_atomic_disable = dcn20_plane_atomic_disable,
.plane_atomic_power_down = dcn10_plane_atomic_power_down,
.enable_power_gating_plane = dcn314_enable_power_gating_plane,
.hubp_pg_control = dcn31_hubp_pg_control,
.hubp_pg_control = dcn314_hubp_pg_control,
.program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree,
.update_odm = dcn314_update_odm,
.dsc_pg_control = dcn314_dsc_pg_control,
......
......@@ -457,6 +457,10 @@ enum dmub_cmd_vbios_type {
* Query DP alt status on a transmitter.
*/
DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT = 26,
/**
* Controls domain power gating
*/
DMUB_CMD__VBIOS_DOMAIN_CONTROL = 28,
};
//==============================================================================
......@@ -1213,6 +1217,23 @@ struct dmub_rb_cmd_dig1_transmitter_control {
union dmub_cmd_dig1_transmitter_control_data transmitter_control; /**< payload */
};
/**
* struct dmub_rb_cmd_domain_control_data - Data for DOMAIN power control
*/
struct dmub_rb_cmd_domain_control_data {
uint8_t inst : 6; /**< DOMAIN instance to control */
uint8_t power_gate : 1; /**< 1=power gate, 0=power up */
uint8_t reserved[3]; /**< Reserved for future use */
};
/**
* struct dmub_rb_cmd_domain_control - Controls DOMAIN power gating
*/
struct dmub_rb_cmd_domain_control {
struct dmub_cmd_header header; /**< header */
struct dmub_rb_cmd_domain_control_data data; /**< payload */
};
/**
* DPIA tunnel command parameters.
*/
......@@ -3322,6 +3343,10 @@ union dmub_rb_cmd {
* Definition of a DMUB_CMD__VBIOS_DIG1_TRANSMITTER_CONTROL command.
*/
struct dmub_rb_cmd_dig1_transmitter_control dig1_transmitter_control;
/**
* Definition of a DMUB_CMD__VBIOS_DOMAIN_CONTROL command.
*/
struct dmub_rb_cmd_domain_control domain_control;
/**
* Definition of a DMUB_CMD__PSR_SET_VERSION command.
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment