[PATCH] usb-storage: convert to common transfer functions

This patch makes all sub-drivers use the same data-moving functions.  It
also eliminates the duplicate functions from raw_bulk.c

drivers/usb/storage/datafab.c

@@ -67,25 +67,23 @@ static int datafab_determine_lun(struct us_data *us,
 
 static inline int
 datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
-	unsigned int act_len;	/* ignored */
-
 	if (len == 0)
 		return USB_STOR_XFER_GOOD;
 
 	US_DEBUGP("datafab_bulk_read:  len = %d\n", len);
-	return usb_storage_raw_bulk(us, SCSI_DATA_READ, data, len, &act_len);
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data, len, NULL);
 }
 
 
 static inline int
 datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
-	unsigned int act_len;	/* ignored */
-
 	if (len == 0)
 		return USB_STOR_XFER_GOOD;
 
 	US_DEBUGP("datafab_bulk_write:  len = %d\n", len);
-	return usb_storage_raw_bulk(us, SCSI_DATA_WRITE, data, len, &act_len);
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			data, len, NULL);
 }
 
 

drivers/usb/storage/jumpshot.c

@@ -62,13 +62,12 @@ static inline int jumpshot_bulk_read(struct us_data *us,
 				     unsigned char *data, 
 				     unsigned int len)
 {
-	unsigned int act_len;	/* ignored */
-
 	if (len == 0)
 		return USB_STOR_XFER_GOOD;
 
 	US_DEBUGP("jumpshot_bulk_read:  len = %d\n", len);
-	return usb_storage_raw_bulk(us, SCSI_DATA_READ, data, len, &act_len);
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data, len, NULL);
 }
 
 
@@ -76,13 +75,12 @@ static inline int jumpshot_bulk_write(struct us_data *us,
 				      unsigned char *data, 
 				      unsigned int len)
 {
-	unsigned int act_len;	/* ignored */
-
 	if (len == 0)
 		return USB_STOR_XFER_GOOD;
 
 	US_DEBUGP("jumpshot_bulk_write:  len = %d\n", len);
-	return usb_storage_raw_bulk(us, SCSI_DATA_WRITE, data, len, &act_len);
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			data, len, NULL);
 }
 
 
@@ -95,11 +93,11 @@ static int jumpshot_get_status(struct us_data  *us)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// send the setup
-	rc = usb_storage_send_control(us, us->recv_ctrl_pipe,
+	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
 				   0, 0xA0, 0, 7, &reply, 1);
 
-	if (rc != USB_STOR_TRANSPORT_GOOD)
-		return rc;
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
 
 	if (reply != 0x50) {
 		US_DEBUGP("jumpshot_get_status:  0x%2x\n",
@@ -159,9 +157,9 @@ static int jumpshot_read_data(struct us_data *us,
 		command[5] |= (sector >> 24) & 0x0F;
 
 		// send the setup + command
-		result = usb_storage_send_control(us, us->send_ctrl_pipe,
+		result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 					       0, 0x20, 0, 1, command, 7);
-		if (result != USB_STOR_TRANSPORT_GOOD)
+		if (result != USB_STOR_XFER_GOOD)
 			goto leave;
 
 		// read the result
@@ -245,8 +243,10 @@ static int jumpshot_write_data(struct us_data *us,
 		command[5] |= (sector >> 24) & 0x0F;
 
 		// send the setup + command
-		result = usb_storage_send_control(us, us->send_ctrl_pipe,
+		result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 			0, 0x20, 0, 1, command, 7);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
 
 		// send the data
 		result = jumpshot_bulk_write(us, ptr, len);
@@ -299,10 +299,10 @@ static int jumpshot_id_device(struct us_data *us,
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// send the setup
-	rc = usb_storage_send_control(us, us->send_ctrl_pipe,
+	rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 				   0, 0x20, 0, 6, command, 2);
 
-	if (rc != USB_STOR_TRANSPORT_GOOD) {
+	if (rc != USB_STOR_XFER_GOOD) {
 		US_DEBUGP("jumpshot_id_device:  Gah! "
 			  "send_control for read_capacity failed\n");
 		return rc;

drivers/usb/storage/raw_bulk.c

@@ -13,219 +13,6 @@
 #include "transport.h"
 #include "raw_bulk.h"
 
-#ifdef CONFIG_USB_STORAGE_DEBUG
-#define DEBUG_PRCT 12
-#else
-#define DEBUG_PRCT 0
-#endif
-
-/*
- * Send a control message and wait for the response.
- *
- * us - the pointer to the us_data structure for the device to use
- *
- * request - the URB Setup Packet's first 6 bytes. The first byte always
- *  corresponds to the request type, and the second byte always corresponds
- *  to the request.  The other 4 bytes do not correspond to value and index,
- *  since they are used in a custom way by the SCM protocol.
- *
- * xfer_data - a buffer from which to get, or to which to store, any data
- *  that gets send or received, respectively, with the URB. Even though
- *  it looks like we allocate a buffer in this code for the data, xfer_data
- *  must contain enough allocated space.
- *
- * xfer_len - the number of bytes to send or receive with the URB.
- *
- */
-
-int
-usb_storage_send_control(struct us_data *us,
-			 unsigned int pipe,
-			 unsigned char request,
-			 unsigned char requesttype,
-			 unsigned int value,
-			 unsigned int index,
-			 unsigned char *xfer_data,
-			 unsigned int xfer_len) {
-
-	int result;
-
-	// Send the URB to the device and wait for a response.
-
-	/* Why are request and request type reversed in this call? */
-
-	result = usb_stor_control_msg(us, pipe,
-			request, requesttype, value, index,
-			xfer_data, xfer_len);
-
-	/* did we abort this command? */
-	if (atomic_read(&us->sm_state) == US_STATE_ABORTING) {
-		US_DEBUGP("usb_stor_send_control(): transfer aborted\n");
-		return USB_STOR_TRANSPORT_ABORTED;
-	}
-
-	// Check the return code for the command.
-	if (result < 0) {
-
-		/* a stall indicates a protocol error */
-		if (result == -EPIPE) {
-			US_DEBUGP("-- Stall on control pipe\n");
-			return USB_STOR_TRANSPORT_ERROR;
-		}
-
-		/* Uh oh... serious problem here */
-		return USB_STOR_TRANSPORT_ERROR;
-	}
-
-	return USB_STOR_TRANSPORT_GOOD;
-}
-
-int
-usb_storage_raw_bulk(struct us_data *us, int direction, unsigned char *data,
-		     unsigned int len, unsigned int *act_len) {
-
-	int result;
-	unsigned int pipe;
-
-	if (direction == SCSI_DATA_READ)
-		pipe = us->recv_bulk_pipe;
-	else
-		pipe = us->send_bulk_pipe;
-
-	result = usb_stor_bulk_msg(us, data, pipe, len, act_len);
-
-	/* if we stall, we need to clear it before we go on */
-	if (result == -EPIPE) {
-		US_DEBUGP("EPIPE: clearing endpoint halt for"
-			  " pipe 0x%x, stalled at %d bytes\n",
-			  pipe, *act_len);
-		if (usb_stor_clear_halt(us, pipe) < 0)
-			return USB_STOR_XFER_ERROR;
-		return USB_STOR_XFER_STALLED;
-	}
-
-	/* did we abort this command? */
-	if (atomic_read(&us->sm_state) == US_STATE_ABORTING) {
-		US_DEBUGP("usb_storage_raw_bulk(): transfer aborted\n");
-		return USB_STOR_XFER_ABORTED;
-	}
-
-	if (result) {
-		/* NAK - that means we've retried a few times already */
-       		if (result == -ETIMEDOUT)
-			US_DEBUGP("raw_bulk(): device NAKed\n");
-		else if (result == -EOVERFLOW)
-			US_DEBUGP("raw_bulk(): babble/overflow\n");
-		else if (result == -ECONNRESET)
-			US_DEBUGP("raw_bulk(): asynchronous reset\n");
-		else if (result != -EPIPE)
-			US_DEBUGP("raw_bulk(): unknown error %d\n",
-				  result);
-
-		return USB_STOR_XFER_ERROR;
-	}
-
-	if (*act_len != len) {
-		US_DEBUGP("Warning: Transferred only %d of %d bytes\n",
-			  *act_len, len);
-		return USB_STOR_XFER_SHORT;
-	}
-
-#if 0
-	US_DEBUGP("raw_bulk(): Transferred %s %d of %d bytes\n",
-		  (direction == SCSI_DATA_READ) ? "in" : "out",
-		  *act_len, len);
-#endif
-
-	return USB_STOR_XFER_GOOD;
-}
-
-int
-usb_storage_bulk_transport(struct us_data *us, int direction,
-			   unsigned char *data, unsigned int len,
-			   int use_sg) {
-
-	int result = USB_STOR_XFER_ERROR;
-	int transferred = 0;
-	int i;
-	struct scatterlist *sg;
-	unsigned int act_len;
-
-	if (len == 0)
-		return USB_STOR_XFER_GOOD;
-
-#if DEBUG_PRCT
-
-	if (direction == SCSI_DATA_WRITE && !use_sg) {
-		char string[64];
-
-		/* Debug-print the first N bytes of the write transfer */
-
-		strcpy(string, "wr: ");
-		for (i=0; i<len && i<DEBUG_PRCT; i++) {
-			sprintf(string+strlen(string), "%02X ", data[i]);
-			if ((i%16) == 15) {
-				US_DEBUGP("%s\n", string);
-				strcpy(string, "wr: ");
-			}
-		}
-		if ((i%16)!=0)
-			US_DEBUGP("%s\n", string);
-	}
-
-	US_DEBUGP("SCM data %s transfer %d sg buffers %d\n",
-		  (direction == SCSI_DATA_READ) ? "in" : "out",
-		  len, use_sg);
-
-#endif /* DEBUG_PRCT */
-
-	if (!use_sg)
-		result = usb_storage_raw_bulk(us, direction,
-					      data, len, &act_len);
-	else {
-		sg = (struct scatterlist *)data;
-
-		for (i=0; i<use_sg && transferred<len; i++) {
-			unsigned char *buf;
-			unsigned int length;
-
-			buf = sg_address(sg[i]);
-			length = len-transferred;
-			if (length > sg[i].length)
-				length = sg[i].length;
-
-			result = usb_storage_raw_bulk(us, direction,
-						      buf, length, &act_len);
-			if (result != USB_STOR_XFER_GOOD)
-				break;
-			transferred += length;
-		}
-	}
-
-#if DEBUG_PRCT
-
-	if (direction == SCSI_DATA_READ && !use_sg) {
-		char string[64];
-
-		/* Debug-print the first N bytes of the read transfer */
-
-		strcpy(string, "rd: ");
-		for (i=0; i<len && i<act_len && i<DEBUG_PRCT; i++) {
-			sprintf(string+strlen(string), "%02X ", data[i]);
-			if ((i%16) == 15) {
-				US_DEBUGP("%s\n", string);
-				strcpy(string, "rd: ");
-			}
-		}
-		if ((i%16)!=0)
-			US_DEBUGP("%s\n", string);
-	}
-
-#endif /* DEBUG_PRCT */
-
-	return result;
-}
-
 /*
  * The routines below convert scatter-gather to single buffer.
  * Some drivers claim this is necessary.

drivers/usb/storage/raw_bulk.h

 #ifndef _USB_STORAGE_RAW_BULK_H_
 #define _USB_STORAGE_RAW_BULK_H_
 
-/* usb bulk */
-extern int usb_storage_send_control(
-	struct us_data *us, unsigned int pipe,
-	unsigned char request, unsigned char requesttype,
-	unsigned int value, unsigned int index,
-	unsigned char *xfer_data, unsigned int xfer_len);
-
-extern int usb_storage_raw_bulk(
-	struct us_data *us, int direction,
-	unsigned char *data, unsigned int len, unsigned int *act_len);
-
-extern int usb_storage_bulk_transport(
-	struct us_data *us, int direction,
-	unsigned char *data, unsigned int len, int use_sg);
-
 /* scatter-gather */
 extern unsigned char *us_copy_from_sgbuf(
 	unsigned char *content, int buflen,

drivers/usb/storage/sddr09.c

@@ -226,6 +226,7 @@ sddr09_send_command(struct us_data *us,
 		    unsigned int xfer_len) {
 	unsigned int pipe;
 	unsigned char requesttype = (0x41 | direction);
+	int rc;
 
 	// Get the receive or send control pipe number
 
@@ -234,8 +235,10 @@ sddr09_send_command(struct us_data *us,
 	else
 		pipe = us->send_ctrl_pipe;
 
-	return usb_storage_send_control(us, pipe, request, requesttype,
+	rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype,
 				   0, 0, xfer_data, xfer_len);
+	return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD :
+			USB_STOR_TRANSPORT_ERROR);
 }
 
 static int
@@ -276,7 +279,6 @@ sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
 		0x03, LUNBITS, 0, 0, buflen, 0, 0, 0, 0, 0, 0, 0
 	};
 	int result;
-	unsigned int act_len;
 
 	result = sddr09_send_scsi_command(us, command, sizeof(command));
 	if (result != USB_STOR_TRANSPORT_GOOD) {
@@ -284,7 +286,8 @@ sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
 		return result;
 	}
 
-	result = usb_storage_raw_bulk(us, SCSI_DATA_READ, sensebuf, buflen, &act_len);
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			sensebuf, buflen, NULL);
 	if (result != USB_STOR_XFER_GOOD) {
 		US_DEBUGP("request sense bulk in failed\n");
 		return USB_STOR_TRANSPORT_ERROR;
@@ -343,11 +346,11 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
 		return result;
 	}
 
-	result = usb_storage_bulk_transport(us, SCSI_DATA_READ,
-				       buf, bulklen, use_sg);
+	result = usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe,
+				       buf, bulklen, use_sg, NULL);
 
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Result for bulk_transport in sddr09_read2%d %d\n",
+		US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n",
 			  x, result);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
@@ -510,11 +513,11 @@ sddr09_writeX(struct us_data *us,
 		return result;
 	}
 
-	result = usb_storage_bulk_transport(us, SCSI_DATA_WRITE,
-				       buf, bulklen, use_sg);
+	result = usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe,
+				       buf, bulklen, use_sg, NULL);
 
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Result for bulk_transport in sddr09_writeX %d\n",
+		US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n",
 			  result);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
@@ -592,11 +595,11 @@ sddr09_read_sg_test_only(struct us_data *us) {
 	if (!buf)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	result = usb_storage_bulk_transport(us, SCSI_DATA_READ,
-				       buf, bulklen, 0);
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				       buf, bulklen, NULL);
 	kfree(buf);
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Result for bulk_transport in sddr09_read_sg %d\n",
+		US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n",
 			  result);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
@@ -631,8 +634,8 @@ sddr09_read_status(struct us_data *us, unsigned char *status) {
 	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
 
-	result = usb_storage_bulk_transport(us, SCSI_DATA_READ,
-				       data, sizeof(data), 0);
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				       data, sizeof(data), NULL);
 	*status = data[0];
 	return (result == USB_STOR_XFER_GOOD ?
 			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
@@ -954,7 +957,8 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
 	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
 
-	result = usb_storage_bulk_transport(us, SCSI_DATA_READ, content, 64, 0);
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			content, 64, NULL);
 
 	for (i = 0; i < 4; i++)
 		deviceID[i] = content[i];
@@ -1545,17 +1549,16 @@ int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
 
 	if (srb->sc_data_direction == SCSI_DATA_WRITE ||
 	    srb->sc_data_direction == SCSI_DATA_READ) {
+		unsigned int pipe = (srb->sc_data_direction == SCSI_DATA_WRITE)
+				? us->send_bulk_pipe : us->recv_bulk_pipe;
 
 		US_DEBUGP("SDDR09: %s %d bytes\n",
 			  (srb->sc_data_direction == SCSI_DATA_WRITE) ?
 			  "sending" : "receiving",
 			  srb->request_bufflen);
 
-		result = usb_storage_bulk_transport(us,
-					       srb->sc_data_direction,
-					       srb->request_buffer, 
-					       srb->request_bufflen,
-					       srb->use_sg);
+		result = usb_stor_bulk_transfer_srb(us, pipe, srb,
+							srb->request_bufflen);
 
 		return (result == USB_STOR_XFER_GOOD ?
 			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);

drivers/usb/storage/sddr55.c

@@ -75,10 +75,13 @@ static int
 sddr55_bulk_transport(struct us_data *us, int direction,
 		      unsigned char *data, unsigned int len) {
 	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+	unsigned int pipe = (direction == SCSI_DATA_READ) ?
+			us->recv_bulk_pipe : us->send_bulk_pipe;
 
-	if (len)
-		info->last_access = jiffies;
-	return usb_storage_bulk_transport(us, direction, data, len, 0);
+	if (!len)
+		return USB_STOR_XFER_GOOD;
+	info->last_access = jiffies;
+	return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL);
 }
 
 /* check if card inserted, if there is, update read_only status

drivers/usb/storage/transport.c

@@ -579,7 +579,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
 
 	/* was the entire command transferred? */
 	if (result < size) {
-		US_DEBUGP("-- transfer was short\n");
+		US_DEBUGP("-- transferred only %d bytes\n", result);
 		return USB_STOR_XFER_SHORT;
 	}
 
@@ -614,7 +614,8 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
 
 	/* if we stall, we need to clear it before we go on */
 	if (result == -EPIPE) {
-		US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
+		US_DEBUGP("clearing endpoint halt for pipe 0x%x,"
+				" stalled at %d bytes\n", pipe, partial);
 		if (usb_stor_clear_halt(us, pipe) < 0)
 			return USB_STOR_XFER_ERROR;
 		return USB_STOR_XFER_STALLED;