watchdog: bd9576: Drop "always-running" property

The always-running (from linux,wdt-gpio.yaml) is abused by the BD9576
watchdog driver. It's defined meaning is "the watchdog is always running
and can not be stopped". The BD9576 watchdog driver has implemented it
as "start watchdog when loading the module and prevent it from being
stopped".

Furthermore, the implementation does not set the WDOG_HW_RUNNING when
enabling the watchdog due to the "always-running" at module loading.
This will end up resulting a watchdog timeout if the device is not
opened.

The culprit was pointed out by Guenter, discussion can be found from
https://lore.kernel.org/lkml/4fa3a64b-60fb-4e5e-8785-0f14da37eea2@roeck-us.net/

Drop the invalid "always-running" handling.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: b237bcac ("wdt: Support wdt on ROHM BD9576MUF and BD9573MUF")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZhPAt76yaJMersXf@fedoraSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

drivers/watchdog/bd9576_wdt.c

@@ -29,7 +29,6 @@ struct bd9576_wdt_priv {
 	struct gpio_desc	*gpiod_en;
 	struct device		*dev;
 	struct regmap		*regmap;
-	bool			always_running;
 	struct watchdog_device	wdd;
 };
 
@@ -62,10 +61,7 @@ static int bd9576_wdt_stop(struct watchdog_device *wdd)
 {
 	struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
 
-	if (!priv->always_running)
-		bd9576_wdt_disable(priv);
-	else
-		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	bd9576_wdt_disable(priv);
 
 	return 0;
 }
@@ -264,9 +260,6 @@ static int bd9576_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	priv->always_running = device_property_read_bool(dev->parent,
-							 "always-running");
-
 	watchdog_set_drvdata(&priv->wdd, priv);
 
 	priv->wdd.info			= &bd957x_wdt_ident;
@@ -281,9 +274,6 @@ static int bd9576_wdt_probe(struct platform_device *pdev)
 
 	watchdog_stop_on_reboot(&priv->wdd);
 
-	if (priv->always_running)
-		bd9576_wdt_start(&priv->wdd);
-
 	return devm_watchdog_register_device(dev, &priv->wdd);
 }