Commit e3d11d3c authored by Jorik Jonker's avatar Jorik Jonker Committed by Maxime Ripard

dts: sun8i-h3: add pinmux definitions for UART2-3

These are the pinmux definitions for UART2-3 on H3. These UARTs can only
be muxed to these pins, so _a and @0 do not really make sense. I have
left out RTS/CTS, since these are rarely used. These can easily be
enabled using an additional pinmux set.
Signed-off-by: default avatarJorik Jonker <jorik@kippendief.biz>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 013ace36
...@@ -373,6 +373,20 @@ uart1_pins_a: uart1@0 { ...@@ -373,6 +373,20 @@ uart1_pins_a: uart1@0 {
allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
}; };
uart2_pins: uart2 {
allwinner,pins = "PA0", "PA1";
allwinner,function = "uart2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins: uart3 {
allwinner,pins = "PG13", "PG14";
allwinner,function = "uart3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
}; };
timer@01c20c00 { timer@01c20c00 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment