Skip to content

L
linux
Commit e3d37813 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'renesas-arm64-dt-for-v4.21' of... 

Merge tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.21

* H3 (r8a7795) SoC:
  - Remove unneeded sound #address/size-cells

* M3-W (r8a7796) SoC:
  - Describe CMT (Compare Match Timer) devices in DT
  - Describe I2C-DVFS device node in DT

* M3-N (r8a77965) SoC:
  - Describe CAN, CANFD and LVDS in DT

* R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs:
  - Describe CPU topology, capacity and cooling maps in DT
  - Add SSIU support to R-Car audio

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs:
  - Extend register range of HSUSB device to match documentation

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
  Salvator-X, Salvator-XS and ULCB boards:
  - Switch eMMC bus to 1V8

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
  Salvator-X and Salvator-XS boards:
  - Describe USB3.0 xHCI host and prerepheral devices as companions

* R-Car E3 (r8a77990) SoC:
  - Add thermal support
  - Add support for interupt controller for external devices (INTC-EX)
  - Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices

* R-Car E3 (r8a77990) based Ebisu board:
  - Enable SDHI, CAN, CANFD, audio and USB3.0
  - Describe serial console pins

* R-Car E3 (r8a77990) based Ebisu and
  R-Car D3 (r8a77995) based Draak board:
  - Enable USB2.0 peripheral device

* R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs:
  - Connect EtherAVB to IPMMU

* R-Car V3M (r8a77970) and V3H (r8a77980) SoCs:
  - Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT
  - Add thermal support

* RZ/G2M (r8a774a1) SoC:
  - Use clock and power index macros
  - Describe VIN, CSI-2 and CAN devices in DT

* tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits)
  arm64: dts: renesas: Add all CPUs in cooling maps
  arm64: dts: renesas: r8a77990: add thermal device support
  arm64: dts: renesas: r8a77990: Enable I2C DMA
  arm64: dts: renesas: r8a7796: Add CMT device nodes
  arm64: dts: renesas: r8a7796: add SSIU support for sound
  arm64: dts: renesas: r8a77990: Add I2C-DVFS device node
  arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes
  arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes
  arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node
  arm64: dts: renesas: Add CPU capacity-dmips-mhz
  arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs
  arm64: dts: renesas: r8a774a1: Replace clock magic numbers
  arm64: dts: renesas: r8a774a1: Replace power magic numbers
  arm64: dts: renesas: r8a7795: add SSIU support for sound
  arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering
  arm64: dts: renesas: ebisu: Add and enable SDHI device nodes
  arm64: dts: renesas: ebisu: Add serial console pins
  arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB
  arm64: dts: renesas: r8a77990: Add all HSCIF nodes
  arm64: dts: renesas: r8a779{7|8}0: add TMU support
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 51ea46e8 275e4eb3
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2701 additions and 150 deletions
arch/arm64/boot/dts/renesas/r8a774a1.dtsi
View file @ e3d37813
This diff is collapsed.
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
View file @ e3d37813
......@@ -112,6 +112,7 @@ &rcar_sound {
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
......@@ -123,6 +124,7 @@ rsnd_endpoint1: endpoint {
};
};
rsnd_port2: port@2 {
reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
......
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
View file @ e3d37813
......@@ -112,6 +112,7 @@ &rcar_sound {
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
......@@ -123,6 +124,7 @@ rsnd_endpoint1: endpoint {
};
};
rsnd_port2: port@2 {
reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
......
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
View file @ e3d37813
......@@ -127,6 +127,7 @@ &rcar_sound {
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
......@@ -138,6 +139,7 @@ rsnd_endpoint1: endpoint {
};
};
rsnd_port2: port@2 {
reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
......
arch/arm64/boot/dts/renesas/r8a7795.dtsi
View file @ e3d37813
......@@ -116,6 +116,38 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&a57_0>;
};
core1 {
cpu = <&a57_1>;
};
core2 {
cpu = <&a57_2>;
};
core3 {
cpu = <&a57_3>;
};
};
cluster1 {
core0 {
cpu = <&a53_0>;
};
core1 {
cpu = <&a53_1>;
};
core2 {
cpu = <&a53_2>;
};
core3 {
cpu = <&a53_3>;
};
};
};
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
......@@ -125,6 +157,7 @@ a57_0: cpu@0 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
......@@ -137,6 +170,7 @@ a57_1: cpu@1 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
......@@ -149,6 +183,7 @@ a57_2: cpu@2 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
......@@ -161,6 +196,7 @@ a57_3: cpu@3 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
......@@ -173,6 +209,7 @@ a53_0: cpu@100 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
};
a53_1: cpu@101 {
......@@ -184,6 +221,7 @@ a53_1: cpu@101 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
};
a53_2: cpu@102 {
......@@ -195,6 +233,7 @@ a53_2: cpu@102 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
};
a53_3: cpu@103 {
......@@ -206,6 +245,7 @@ a53_3: cpu@103 {
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
};
L2_CA57: cache-controller-0 {
......@@ -695,7 +735,7 @@ hscif4: serial@e66b0000 {
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a7795",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
......@@ -712,7 +752,7 @@ hsusb: usb@e6590000 {
hsusb3: usb@e659c000 {
compatible = "renesas,usbhs-r8a7795",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe659c000 0 0x100>;
reg = <0 0xe659c000 0 0x200>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
......@@ -1920,6 +1960,217 @@ src9: src-9 {
};
};
rcar_sound,ssiu {
ssiu00: ssiu-0 {
dmas = <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx";
};
ssiu01: ssiu-1 {
dmas = <&audma0 0x35>, <&audma1 0x36>;
dma-names = "rx", "tx";
};
ssiu02: ssiu-2 {
dmas = <&audma0 0x37>, <&audma1 0x38>;
dma-names = "rx", "tx";
};
ssiu03: ssiu-3 {
dmas = <&audma0 0x47>, <&audma1 0x48>;
dma-names = "rx", "tx";
};
ssiu04: ssiu-4 {
dmas = <&audma0 0x3F>, <&audma1 0x40>;
dma-names = "rx", "tx";
};
ssiu05: ssiu-5 {
dmas = <&audma0 0x43>, <&audma1 0x44>;
dma-names = "rx", "tx";
};
ssiu06: ssiu-6 {
dmas = <&audma0 0x4F>, <&audma1 0x50>;
dma-names = "rx", "tx";
};
ssiu07: ssiu-7 {
dmas = <&audma0 0x53>, <&audma1 0x54>;
dma-names = "rx", "tx";
};
ssiu10: ssiu-8 {
dmas = <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx";
};
ssiu11: ssiu-9 {
dmas = <&audma0 0x4B>, <&audma1 0x4C>;
dma-names = "rx", "tx";
};
ssiu12: ssiu-10 {
dmas = <&audma0 0x57>, <&audma1 0x58>;
dma-names = "rx", "tx";
};
ssiu13: ssiu-11 {
dmas = <&audma0 0x59>, <&audma1 0x5A>;
dma-names = "rx", "tx";
};
ssiu14: ssiu-12 {
dmas = <&audma0 0x5F>, <&audma1 0x60>;
dma-names = "rx", "tx";
};
ssiu15: ssiu-13 {
dmas = <&audma0 0xC3>, <&audma1 0xC4>;
dma-names = "rx", "tx";
};
ssiu16: ssiu-14 {
dmas = <&audma0 0xC7>, <&audma1 0xC8>;
dma-names = "rx", "tx";
};
ssiu17: ssiu-15 {
dmas = <&audma0 0xCB>, <&audma1 0xCC>;
dma-names = "rx", "tx";
};
ssiu20: ssiu-16 {
dmas = <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx";
};
ssiu21: ssiu-17 {
dmas = <&audma0 0x67>, <&audma1 0x68>;
dma-names = "rx", "tx";
};
ssiu22: ssiu-18 {
dmas = <&audma0 0x6B>, <&audma1 0x6C>;
dma-names = "rx", "tx";
};
ssiu23: ssiu-19 {
dmas = <&audma0 0x6D>, <&audma1 0x6E>;
dma-names = "rx", "tx";
};
ssiu24: ssiu-20 {
dmas = <&audma0 0xCF>, <&audma1 0xCE>;
dma-names = "rx", "tx";
};
ssiu25: ssiu-21 {
dmas = <&audma0 0xEB>, <&audma1 0xEC>;
dma-names = "rx", "tx";
};
ssiu26: ssiu-22 {
dmas = <&audma0 0xED>, <&audma1 0xEE>;
dma-names = "rx", "tx";
};
ssiu27: ssiu-23 {
dmas = <&audma0 0xEF>, <&audma1 0xF0>;
dma-names = "rx", "tx";
};
ssiu30: ssiu-24 {
dmas = <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx";
};
ssiu31: ssiu-25 {
dmas = <&audma0 0x21>, <&audma1 0x22>;
dma-names = "rx", "tx";
};
ssiu32: ssiu-26 {
dmas = <&audma0 0x23>, <&audma1 0x24>;
dma-names = "rx", "tx";
};
ssiu33: ssiu-27 {
dmas = <&audma0 0x25>, <&audma1 0x26>;
dma-names = "rx", "tx";
};
ssiu34: ssiu-28 {
dmas = <&audma0 0x27>, <&audma1 0x28>;
dma-names = "rx", "tx";
};
ssiu35: ssiu-29 {
dmas = <&audma0 0x29>, <&audma1 0x2A>;
dma-names = "rx", "tx";
};
ssiu36: ssiu-30 {
dmas = <&audma0 0x2B>, <&audma1 0x2C>;
dma-names = "rx", "tx";
};
ssiu37: ssiu-31 {
dmas = <&audma0 0x2D>, <&audma1 0x2E>;
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
dmas = <&audma0 0x17>, <&audma1 0x18>;
dma-names = "rx", "tx";
};
ssiu42: ssiu-34 {
dmas = <&audma0 0x19>, <&audma1 0x1A>;
dma-names = "rx", "tx";
};
ssiu43: ssiu-35 {
dmas = <&audma0 0x1B>, <&audma1 0x1C>;
dma-names = "rx", "tx";
};
ssiu44: ssiu-36 {
dmas = <&audma0 0x1D>, <&audma1 0x1E>;
dma-names = "rx", "tx";
};
ssiu45: ssiu-37 {
dmas = <&audma0 0x1F>, <&audma1 0x20>;
dma-names = "rx", "tx";
};
ssiu46: ssiu-38 {
dmas = <&audma0 0x31>, <&audma1 0x32>;
dma-names = "rx", "tx";
};
ssiu47: ssiu-39 {
dmas = <&audma0 0x33>, <&audma1 0x34>;
dma-names = "rx", "tx";
};
ssiu50: ssiu-40 {
dmas = <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx";
};
ssiu60: ssiu-41 {
dmas = <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx";
};
ssiu70: ssiu-42 {
dmas = <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx";
};
ssiu80: ssiu-43 {
dmas = <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx";
};
ssiu90: ssiu-44 {
dmas = <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx";
};
ssiu91: ssiu-45 {
dmas = <&audma0 0x7F>, <&audma1 0x80>;
dma-names = "rx", "tx";
};
ssiu92: ssiu-46 {
dmas = <&audma0 0x81>, <&audma1 0x82>;
dma-names = "rx", "tx";
};
ssiu93: ssiu-47 {
dmas = <&audma0 0x83>, <&audma1 0x84>;
dma-names = "rx", "tx";
};
ssiu94: ssiu-48 {
dmas = <&audma0 0xA3>, <&audma1 0xA4>;
dma-names = "rx", "tx";
};
ssiu95: ssiu-49 {
dmas = <&audma0 0xA5>, <&audma1 0xA6>;
dma-names = "rx", "tx";
};
ssiu96: ssiu-50 {
dmas = <&audma0 0xA7>, <&audma1 0xA8>;
dma-names = "rx", "tx";
};
ssiu97: ssiu-51 {
dmas = <&audma0 0xA9>, <&audma1 0xAA>;
dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
......@@ -1972,20 +2223,6 @@ ssi9: ssi-9 {
dma-names = "rx", "tx", "rxu", "txu";
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
};
port@1 {
reg = <1>;
};
port@2 {
reg = <2>;
};
};
};
audma0: dma-controller@ec700000 {
......@@ -2878,7 +3115,10 @@ sensor1_crit: sensor1-crit {
cooling-maps {
map0 {
trip = <&sensor1_passive>;
cooling-device = <&a57_0 4 4>;
cooling-device = <&a57_0 4 4>,
<&a57_1 4 4>,
<&a57_2 4 4>,
<&a57_3 4 4>;
};
};
};
......@@ -2904,7 +3144,10 @@ sensor2_crit: sensor2-crit {
cooling-maps {
map0 {
trip = <&sensor2_passive>;
cooling-device = <&a57_0 4 4>;
cooling-device = <&a57_0 4 4>,
<&a57_1 4 4>,
<&a57_2 4 4>,
<&a57_3 4 4>;
};
};
};
......@@ -2930,7 +3173,10 @@ sensor3_crit: sensor3-crit {
cooling-maps {
map0 {
trip = <&sensor3_passive>;
cooling-device = <&a57_0 4 4>;
cooling-device = <&a57_0 4 4>,
<&a57_1 4 4>,
<&a57_2 4 4>,
<&a57_3 4 4>;
};
};
};
......
arch/arm64/boot/dts/renesas/r8a7796.dtsi
View file @ e3d37813
This diff is collapsed.
arch/arm64/boot/dts/renesas/r8a77965.dtsi
View file @ e3d37813
......@@ -590,7 +590,7 @@ hscif4: serial@e66b0000 {
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a77965",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
......@@ -900,19 +900,67 @@ avb: ethernet@e6800000 {
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
can0: can@e6c30000 {
compatible = "renesas,can-r8a77965",
"renesas,rcar-gen3-can";
reg = <0 0xe6c30000 0 0x1000>;
/* placeholder */
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>,
<&cpg CPG_CORE R8A77965_CLK_CANFD>,
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 916>;
status = "disabled";
};
can1: can@e6c38000 {
compatible = "renesas,can-r8a77965",
"renesas,rcar-gen3-can";
reg = <0 0xe6c38000 0 0x1000>;
/* placeholder */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>,
<&cpg CPG_CORE R8A77965_CLK_CANFD>,
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 915>;
status = "disabled";
};
canfd: can@e66c0000 {
compatible = "renesas,r8a77965-canfd",
"renesas,rcar-gen3-canfd";
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77965_CLK_CANFD>,
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
channel0 {
status = "disabled";
};
channel1 {
status = "disabled";
};
};
pwm0: pwm@e6e30000 {
......@@ -2153,6 +2201,33 @@ du_out_hdmi0: endpoint {
port@2 {
reg = <2>;
du_out_lvds0: endpoint {
remote-endpoint = <&lvds0_in>;
};
};
};
};
lvds0: lvds@feb90000 {
compatible = "renesas,r8a77965-lvds";
reg = <0 0xfeb90000 0 0x14>;
clocks = <&cpg CPG_MOD 727>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 727>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};
......
arch/arm64/boot/dts/renesas/r8a77970.dtsi
View file @ e3d37813
......@@ -300,6 +300,19 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
thermal: thermal@e6190000 {
compatible = "renesas,thermal-r8a77970";
reg = <0 0xe6190000 0 0x10
0 0xe6190100 0 0x120>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
intc_ex: interrupt-controller@e61c0000 {
compatible = "renesas,intc-ex-r8a77970", "renesas,irqc";
#interrupt-cells = <2>;
......@@ -316,6 +329,71 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 407>;
};
tmu0: timer@e61e0000 {
compatible = "renesas,tmu-r8a77970", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 125>;
clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 125>;
status = "disabled";
};
tmu1: timer@e6fc0000 {
compatible = "renesas,tmu-r8a77970", "renesas,tmu";
reg = <0 0xe6fc0000 0 0x30>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 124>;
status = "disabled";
};
tmu2: timer@e6fd0000 {
compatible = "renesas,tmu-r8a77970", "renesas,tmu";
reg = <0 0xe6fd0000 0 0x30>;
interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 123>;
clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 123>;
status = "disabled";
};
tmu3: timer@e6fe0000 {
compatible = "renesas,tmu-r8a77970", "renesas,tmu";
reg = <0 0xe6fe0000 0 0x30>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 122>;
clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 122>;
status = "disabled";
};
tmu4: timer@ffc00000 {
compatible = "renesas,tmu-r8a77970", "renesas,tmu";
reg = <0 0xffc00000 0 0x30>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 121>;
clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 121>;
status = "disabled";
};
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a77970",
"renesas,rcar-gen3-i2c";
......@@ -543,6 +621,56 @@ avb: ethernet@e6800000 {
status = "disabled";
};
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 8>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm1: pwm@e6e31000 {
compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
reg = <0 0xe6e31000 0 8>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm2: pwm@e6e32000 {
compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
reg = <0 0xe6e32000 0 8>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm3: pwm@e6e33000 {
compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
reg = <0 0xe6e33000 0 8>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm4: pwm@e6e34000 {
compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
reg = <0 0xe6e34000 0 8>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a77970",
"renesas,rcar-gen3-scif",
......@@ -625,6 +753,70 @@ tpu: pwm@e6e80000 {
status = "disabled";
};
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a77970",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6e90000 0 0x64>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 211>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 211>;
dmas = <&dmac1 0x41>, <&dmac1 0x40>,
<&dmac2 0x41>, <&dmac2 0x40>;
dma-names = "tx", "rx", "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
msiof1: spi@e6ea0000 {
compatible = "renesas,msiof-r8a77970",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 210>;
dmas = <&dmac1 0x43>, <&dmac1 0x42>,
<&dmac2 0x43>, <&dmac2 0x42>;
dma-names = "tx", "rx", "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
msiof2: spi@e6c00000 {
compatible = "renesas,msiof-r8a77970",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6c00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 209>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 209>;
dmas = <&dmac1 0x45>, <&dmac1 0x44>,
<&dmac2 0x45>, <&dmac2 0x44>;
dma-names = "tx", "rx", "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
msiof3: spi@e6c10000 {
compatible = "renesas,msiof-r8a77970",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6c10000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 208>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 208>;
dmas = <&dmac1 0x47>, <&dmac1 0x46>,
<&dmac2 0x47>, <&dmac2 0x46>;
dma-names = "tx", "rx", "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77970";
reg = <0 0xe6ef0000 0 0x1000>;
......@@ -983,6 +1175,25 @@ prr: chipid@fff00044 {
};
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
......
arch/arm64/boot/dts/renesas/r8a77980.dtsi
View file @ e3d37813
......@@ -330,6 +330,19 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
tsc: thermal@e6198000 {
compatible = "renesas,r8a77980-thermal";
reg = <0 0xe6198000 0 0x100>,
<0 0xe61a0000 0 0x100>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
};
intc_ex: interrupt-controller@e61c0000 {
compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
#interrupt-cells = <2>;
......@@ -346,6 +359,71 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 407>;
};
tmu0: timer@e61e0000 {
compatible = "renesas,tmu-r8a77980", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 125>;
clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 125>;
status = "disabled";
};
tmu1: timer@e6fc0000 {
compatible = "renesas,tmu-r8a77980", "renesas,tmu";
reg = <0 0xe6fc0000 0 0x30>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 124>;
status = "disabled";
};
tmu2: timer@e6fd0000 {
compatible = "renesas,tmu-r8a77980", "renesas,tmu";
reg = <0 0xe6fd0000 0 0x30>;
interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 123>;
clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 123>;
status = "disabled";
};
tmu3: timer@e6fe0000 {
compatible = "renesas,tmu-r8a77980", "renesas,tmu";
reg = <0 0xe6fe0000 0 0x30>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 122>;
clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 122>;
status = "disabled";
};
tmu4: timer@ffc00000 {
compatible = "renesas,tmu-r8a77980", "renesas,tmu";
reg = <0 0xffc00000 0 0x30>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 121>;
clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 121>;
status = "disabled";
};
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a77980",
"renesas,rcar-gen3-i2c";
......@@ -589,11 +667,62 @@ avb: ethernet@e6800000 {
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
iommus = <&ipmmu_ds1 33>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x10>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm1: pwm@e6e31000 {
compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
reg = <0 0xe6e31000 0 0x10>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm2: pwm@e6e32000 {
compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
reg = <0 0xe6e32000 0 0x10>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm3: pwm@e6e33000 {
compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
reg = <0 0xe6e33000 0 0x10>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
pwm4: pwm@e6e34000 {
compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
reg = <0 0xe6e34000 0 0x10>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 523>;
status = "disabled";
};
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a77980",
"renesas,rcar-gen3-scif",
......@@ -677,6 +806,58 @@ tpu: pwm@e6e80000 {
status = "disabled";
};
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a77980",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6e90000 0 0x64>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 211>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 211>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
msiof1: spi@e6ea0000 {
compatible = "renesas,msiof-r8a77980",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
msiof2: spi@e6c00000 {
compatible = "renesas,msiof-r8a77980",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6c00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 209>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 209>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
msiof3: spi@e6c10000 {
compatible = "renesas,msiof-r8a77980",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6c10000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 208>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77980";
reg = <0 0xe6ef0000 0 0x1000>;
......@@ -1354,6 +1535,46 @@ prr: chipid@fff00044 {
};
};
thermal-zones {
thermal-sensor-1 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
trips {
sensor1-passive {
temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
sensor1-critical {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
};
thermal-sensor-2 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
trips {
sensor2-passive {
temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
sensor2-critical {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
......
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
View file @ e3d37813
......@@ -29,6 +29,16 @@ memory@48000000 {
reg = <0x0 0x48000000 0x0 0x38000000>;
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11289600>;
};
cvbs-in {
compatible = "composite-video-connector";
label = "CVBS IN";
......@@ -119,6 +129,15 @@ adv7123_out: endpoint {
};
};
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
......@@ -128,11 +147,100 @@ reg_3p3v: regulator1 {
regulator-always-on;
};
vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
regulator-name = "USB20_VBUS_CN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
rsnd_ak4613: sound {
compatible = "simple-scu-audio-card";
simple-audio-card,name = "rsnd-ak4613";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcpu>;
simple-audio-card,frame-master = <&sndcpu>;
simple-audio-card,prefix = "ak4613";
simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
"DAI0 Capture", "ak4613 Capture";
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4613>;
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&avb {
......@@ -152,6 +260,16 @@ phy0: ethernet-phy@0 {
};
};
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
status = "okay";
channel0 {
status = "okay";
};
};
&csi40 {
status = "okay";
......@@ -188,6 +306,7 @@ endpoint {
};
&ehci0 {
dr_mode = "otg";
status = "okay";
};
......@@ -195,6 +314,11 @@ &extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c0 {
status = "okay";
......@@ -270,6 +394,37 @@ adv7482_txa: endpoint {
};
};
&i2c3 {
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 3>;
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x12_clk>;
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
};
&lvds0 {
status = "okay";
......@@ -295,6 +450,15 @@ &lvds1 {
};
&ohci0 {
dr_mode = "otg";
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pciec0 {
status = "okay";
};
......@@ -306,6 +470,11 @@ mux {
};
};
canfd0_pins: canfd0 {
groups = "canfd0_data";
function = "canfd0";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
......@@ -321,8 +490,54 @@ pwm5_pins: pwm5 {
function = "pwm5";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <3300>;
};
sdhi1_pins_uhs: sd1_uhs {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
};
sound_clk_pins: sound_clk {
groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
"audio_clkout_a", "audio_clkout1_a";
function = "audio_clk";
};
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
usb0_pins: usb {
groups = "usb0_b";
groups = "usb0_b", "usb0_id";
function = "usb0";
};
......@@ -346,19 +561,73 @@ &pwm5 {
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
clkout-lr-synchronous;
status = "okay";
/* update <audio_clk_b> to <cs2000> */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
<&cpg CPG_CORE R8A77990_CLK_ZA2>;
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src0 &dvc0>;
capture = <&ssi1 &src1 &dvc1>;
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&ssi1 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&vbus0_usb2>;
status = "okay";
};
&usb3_peri0 {
companion = <&xhci0>;
status = "okay";
};
......@@ -372,3 +641,46 @@ &xhci0 {
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
pinctrl-1 = <&sdhi1_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi3_pins>;
pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
mmc-hs200-1_8v;
bus-width = <8>;
non-removable;
status = "okay";
};
arch/arm64/boot/dts/renesas/r8a77990.dtsi
View file @ e3d37813
This diff is collapsed.
arch/arm64/boot/dts/renesas/r8a77995-draak.dts
View file @ e3d37813
......@@ -179,6 +179,7 @@ endpoint {
};
&ehci0 {
dr_mode = "host";
status = "okay";
};
......@@ -186,6 +187,11 @@ &extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "host";
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
......@@ -337,6 +343,7 @@ &lvds1 {
};
&ohci0 {
dr_mode = "host";
status = "okay";
};
......@@ -445,6 +452,7 @@ &usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
renesas,no-otg-pins;
status = "okay";
};
......
arch/arm64/boot/dts/renesas/r8a77995.dtsi
View file @ e3d37813
......@@ -344,6 +344,51 @@ i2c3: i2c@e66d0000 {
status = "disabled";
};
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a77995",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a77995-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
usb_dmac1: dma-controller@e65b0000 {
compatible = "renesas,r8a77995-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
canfd: can@e66c0000 {
compatible = "renesas,r8a77995-canfd",
"renesas,rcar-gen3-canfd";
......
arch/arm64/boot/dts/renesas/salvator-common.dtsi
View file @ e3d37813
......@@ -605,12 +605,6 @@ sdhi0_pins_uhs: sd0_uhs {
};
sdhi2_pins: sd2 {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
power-source = <3300>;
};
sdhi2_pins_uhs: sd2_uhs {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
power-source = <1800>;
......@@ -707,7 +701,10 @@ &rcar_sound {
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
ports {
#address-cells = <1>;
#size-cells = <0>;
rsnd_port0: port@0 {
reg = <0>;
rsnd_endpoint0: endpoint {
remote-endpoint = <&ak4613_endpoint>;
......@@ -760,7 +757,7 @@ &sdhi0 {
&sdhi2 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi2_pins>;
pinctrl-1 = <&sdhi2_pins_uhs>;
pinctrl-1 = <&sdhi2_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
......@@ -814,6 +811,8 @@ &usb3_peri0 {
phys = <&usb3_phy0>;
phy-names = "usb";
companion = <&xhci0>;
status = "okay";
};
......
arch/arm64/boot/dts/renesas/ulcb.dtsi
View file @ e3d37813
......@@ -330,12 +330,6 @@ sdhi0_pins_uhs: sd0_uhs {
};
sdhi2_pins: sd2 {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
power-source = <3300>;
};
sdhi2_pins_uhs: sd2_uhs {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
power-source = <1800>;
......@@ -426,7 +420,7 @@ &sdhi0 {
&sdhi2 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi2_pins>;
pinctrl-1 = <&sdhi2_pins_uhs>;
pinctrl-1 = <&sdhi2_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7