Merge branch 'acpi-init'

* acpi-init:
  clocksource: cosmetic: Drop OF 'dependency' from symbols
  clocksource / arm_arch_timer: Convert to ACPI probing
  clocksource: Add new CLKSRC_{PROBE,ACPI} config symbols
  clocksource / ACPI: Add probing infrastructure for ACPI-based clocksources
  irqchip / GIC: Convert the GIC driver to ACPI probing
  irqchip / ACPI: Add probing infrastructure for ACPI-based irqchips
  ACPI: Add early device probing infrastructure

arch/arm/kernel/time.c

@@ -120,6 +120,6 @@ void __init time_init(void)
 #ifdef CONFIG_COMMON_CLK
 		of_clk_init(NULL);
 #endif
-		clocksource_of_init();
+		clocksource_probe();
 	}
 }

arch/arm/mach-omap2/timer.c

@@ -647,7 +647,7 @@ static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
 void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
-	clocksource_of_init();
+	clocksource_probe();
 }
 #else
 void __init omap4_local_timer_init(void)
@@ -663,7 +663,7 @@ void __init omap5_realtime_timer_init(void)
 	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	clocksource_of_init();
+	clocksource_probe();
 }
 #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 

arch/arm/mach-rockchip/rockchip.c

@@ -67,7 +67,7 @@ static void __init rockchip_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static void __init rockchip_dt_init(void)

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -97,7 +97,7 @@ static u32 __init r8a7779_read_mode_pins(void)
 static void __init r8a7779_init_time(void)
 {
 	r8a7779_clocks_init(r8a7779_read_mode_pins());
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static const char *const r8a7779_compat_dt[] __initconst = {

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -128,7 +128,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	rcar_gen2_clocks_init(mode);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 struct memory_reserve_config {

arch/arm/mach-spear/spear13xx.c

@@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	clocksource_of_init();
+	clocksource_probe();
 }

arch/arm/mach-sunxi/sunxi.c

@@ -46,7 +46,7 @@ static void __init sun6i_timer_init(void)
 	of_clk_init(NULL);
 	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
 		sun6i_reset_init();
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")

arch/arm/mach-u300/core.c

@@ -408,7 +408,7 @@ static const char * u300_board_compat[] = {
 DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq_dt,
-	.init_time	= clocksource_of_init,
+	.init_time	= clocksource_probe,
 	.init_machine	= u300_init_machine_dt,
 	.restart	= u300_restart,
 	.dt_compat      = u300_board_compat,

arch/arm/mach-ux500/timer.c

@@ -44,5 +44,5 @@ void __init ux500_timer_init(void)
 
 dt_fail:
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	clocksource_of_init();
+	clocksource_probe();
 }

arch/arm/mach-zynq/common.c

@@ -154,7 +154,7 @@ static void __init zynq_timer_init(void)
 
 	zynq_clock_init();
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static struct map_desc zynq_cortex_a9_scu_map __initdata = {

arch/arm64/include/asm/acpi.h

@@ -12,7 +12,6 @@
 #ifndef _ASM_ACPI_H
 #define _ASM_ACPI_H
 
-#include <linux/irqchip/arm-gic-acpi.h>
 #include <linux/mm.h>
 #include <linux/psci.h>
 

arch/arm64/include/asm/irq.h

 #ifndef __ASM_IRQ_H
 #define __ASM_IRQ_H
 
-#include <linux/irqchip/arm-gic-acpi.h>
-
 #include <asm-generic/irq.h>
 
 struct pt_regs;
@@ -10,15 +8,4 @@ struct pt_regs;
 extern void migrate_irqs(void);
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
-static inline void acpi_irq_init(void)
-{
-	/*
-	 * Hardcode ACPI IRQ chip initialization to GICv2 for now.
-	 * Proper irqchip infrastructure will be implemented along with
-	 * incoming  GICv2m|GICv3|ITS bits.
-	 */
-	acpi_gic_init();
-}
-#define acpi_irq_init acpi_irq_init
-
 #endif

arch/arm64/kernel/acpi.c

@@ -205,28 +205,3 @@ void __init acpi_boot_table_init(void)
 			disable_acpi();
 	}
 }
-
-void __init acpi_gic_init(void)
-{
-	struct acpi_table_header *table;
-	acpi_status status;
-	acpi_size tbl_size;
-	int err;
-
-	if (acpi_disabled)
-		return;
-
-	status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
-	if (ACPI_FAILURE(status)) {
-		const char *msg = acpi_format_exception(status);
-
-		pr_err("Failed to get MADT table, %s\n", msg);
-		return;
-	}
-
-	err = gic_v2_acpi_init(table);
-	if (err)
-		pr_err("Failed to initialize GIC IRQ controller");
-
-	early_acpi_os_unmap_memory((char *)table, tbl_size);
-}

arch/arm64/kernel/time.c

@@ -67,16 +67,10 @@ void __init time_init(void)
 	u32 arch_timer_rate;
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 
 	tick_setup_hrtimer_broadcast();
 
-	/*
-	 * Since ACPI or FDT will only one be available in the system,
-	 * we can use acpi_generic_timer_init() here safely
-	 */
-	acpi_generic_timer_init();
-
 	arch_timer_rate = arch_timer_get_rate();
 	if (!arch_timer_rate)
 		panic("Unable to initialise architected timer.\n");

arch/microblaze/kernel/setup.c

@@ -194,7 +194,7 @@ void __init time_init(void)
 {
 	of_clk_init(NULL);
 	setup_cpuinfo_clk();
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 #ifdef CONFIG_DEBUG_FS

arch/mips/pistachio/time.c

@@ -39,7 +39,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {

arch/mips/ralink/clk.c

@@ -75,5 +75,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_of_init();
+	clocksource_probe();
 }

arch/nios2/kernel/time.c

@@ -324,7 +324,7 @@ void __init time_init(void)
 	if (count < 2)
 		panic("%d timer is found, it needs 2 timers in system\n", count);
 
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 CLOCKSOURCE_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);

arch/xtensa/kernel/time.c

@@ -148,7 +148,7 @@ void __init time_init(void)
 	local_timer_setup(0);
 	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction);
 	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 /*

drivers/acpi/scan.c

@@ -1913,3 +1913,42 @@ int __init acpi_scan_init(void)
 	mutex_unlock(&acpi_scan_lock);
 	return result;
 }
+
+static struct acpi_probe_entry *ape;
+static int acpi_probe_count;
+static DEFINE_SPINLOCK(acpi_probe_lock);
+
+static int __init acpi_match_madt(struct acpi_subtable_header *header,
+				  const unsigned long end)
+{
+	if (!ape->subtable_valid || ape->subtable_valid(header, ape))
+		if (!ape->probe_subtbl(header, end))
+			acpi_probe_count++;
+
+	return 0;
+}
+
+int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr)
+{
+	int count = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	spin_lock(&acpi_probe_lock);
+	for (ape = ap_head; nr; ape++, nr--) {
+		if (ACPI_COMPARE_NAME(ACPI_SIG_MADT, ape->id)) {
+			acpi_probe_count = 0;
+			acpi_table_parse_madt(ape->type, acpi_match_madt, 0);
+			count += acpi_probe_count;
+		} else {
+			int res;
+			res = acpi_table_parse(ape->id, ape->probe_table);
+			if (!res)
+				count++;
+		}
+	}
+	spin_unlock(&acpi_probe_lock);
+
+	return count;
+}

drivers/clocksource/Kconfig

@@ -2,6 +2,14 @@ menu "Clock Source drivers"
 
 config CLKSRC_OF
 	bool
+	select CLKSRC_PROBE
+
+config CLKSRC_ACPI
+	bool
+	select CLKSRC_PROBE
+
+config CLKSRC_PROBE
+	bool
 
 config CLKSRC_I8253
 	bool
@@ -123,6 +131,7 @@ config CLKSRC_STM32
 config ARM_ARCH_TIMER
 	bool
 	select CLKSRC_OF if OF
+	select CLKSRC_ACPI if ACPI
 
 config ARM_ARCH_TIMER_EVTSTREAM
 	bool "Support for ARM architected timer event stream generation"

drivers/clocksource/Makefile

-obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
+obj-$(CONFIG_CLKSRC_PROBE)	+= clksrc-probe.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
 obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o

drivers/clocksource/arm_arch_timer.c

@@ -864,13 +864,5 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 	arch_timer_init();
 	return 0;
 }
-
-/* Initialize all the generic timers presented in GTDT */
-void __init acpi_generic_timer_init(void)
-{
-	if (acpi_disabled)
-		return;
-
-	acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
-}
+CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif

drivers/clocksource/clksrc-of.c → drivers/clocksource/clksrc-probe.c

@@ -14,6 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/clocksource.h>
@@ -23,7 +24,7 @@ extern struct of_device_id __clksrc_of_table[];
 static const struct of_device_id __clksrc_of_table_sentinel
 	__used __section(__clksrc_of_table_end);
 
-void __init clocksource_of_init(void)
+void __init clocksource_probe(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
@@ -38,6 +39,9 @@ void __init clocksource_of_init(void)
 		init_func(np);
 		clocksources++;
 	}
+
+	clocksources += acpi_probe_device_table(clksrc);
+
 	if (!clocksources)
 		pr_crit("%s: no matching clocksources found\n", __func__);
 }

drivers/irqchip/irq-gic.c

@@ -41,7 +41,6 @@
 #include <linux/irqchip.h>
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqchip/arm-gic.h>
-#include <linux/irqchip/arm-gic-acpi.h>
 
 #include <asm/cputype.h>
 #include <asm/irq.h>
@@ -1195,7 +1194,7 @@ IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
 #endif
 
 #ifdef CONFIG_ACPI
-static phys_addr_t dist_phy_base, cpu_phy_base __initdata;
+static phys_addr_t cpu_phy_base __initdata;
 
 static int __init
 gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
@@ -1223,60 +1222,56 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 	return 0;
 }
 
-static int __init
-gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
-				const unsigned long end)
+/* The things you have to do to just *count* something... */
+static int __init acpi_dummy_func(struct acpi_subtable_header *header,
+				  const unsigned long end)
 {
-	struct acpi_madt_generic_distributor *dist;
+	return 0;
+}
 
-	dist = (struct acpi_madt_generic_distributor *)header;
+static bool __init acpi_gic_redist_is_present(void)
+{
+	return acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
+				     acpi_dummy_func, 0) > 0;
+}
 
-	if (BAD_MADT_ENTRY(dist, end))
-		return -EINVAL;
+static bool __init gic_validate_dist(struct acpi_subtable_header *header,
+				     struct acpi_probe_entry *ape)
+{
+	struct acpi_madt_generic_distributor *dist;
+	dist = (struct acpi_madt_generic_distributor *)header;
 
-	dist_phy_base = dist->base_address;
-	return 0;
+	return (dist->version == ape->driver_data &&
+		(dist->version != ACPI_MADT_GIC_VERSION_NONE ||
+		 !acpi_gic_redist_is_present()));
 }
 
-int __init
-gic_v2_acpi_init(struct acpi_table_header *table)
+#define ACPI_GICV2_DIST_MEM_SIZE	(SZ_4K)
+#define ACPI_GIC_CPU_IF_MEM_SIZE	(SZ_8K)
+
+static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
+				   const unsigned long end)
 {
+	struct acpi_madt_generic_distributor *dist;
 	void __iomem *cpu_base, *dist_base;
 	int count;
 
 	/* Collect CPU base addresses */
-	count = acpi_parse_entries(ACPI_SIG_MADT,
-				   sizeof(struct acpi_table_madt),
-				   gic_acpi_parse_madt_cpu, table,
-				   ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+				      gic_acpi_parse_madt_cpu, 0);
 	if (count <= 0) {
 		pr_err("No valid GICC entries exist\n");
 		return -EINVAL;
 	}
 
-	/*
-	 * Find distributor base address. We expect one distributor entry since
-	 * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
-	 */
-	count = acpi_parse_entries(ACPI_SIG_MADT,
-				   sizeof(struct acpi_table_madt),
-				   gic_acpi_parse_madt_distributor, table,
-				   ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
-	if (count <= 0) {
-		pr_err("No valid GICD entries exist\n");
-		return -EINVAL;
-	} else if (count > 1) {
-		pr_err("More than one GICD entry detected\n");
-		return -EINVAL;
-	}
-
 	cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
 	if (!cpu_base) {
 		pr_err("Unable to map GICC registers\n");
 		return -ENOMEM;
 	}
 
-	dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
+	dist = (struct acpi_madt_generic_distributor *)header;
+	dist_base = ioremap(dist->base_address, ACPI_GICV2_DIST_MEM_SIZE);
 	if (!dist_base) {
 		pr_err("Unable to map GICD registers\n");
 		iounmap(cpu_base);
@@ -1302,4 +1297,10 @@ gic_v2_acpi_init(struct acpi_table_header *table)
 	acpi_irq_model = ACPI_IRQ_MODEL_GIC;
 	return 0;
 }
+IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
+		     gic_validate_dist, ACPI_MADT_GIC_VERSION_V2,
+		     gic_v2_acpi_init);
+IRQCHIP_ACPI_DECLARE(gic_v2_maybe, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
+		     gic_validate_dist, ACPI_MADT_GIC_VERSION_NONE,
+		     gic_v2_acpi_init);
 #endif

drivers/irqchip/irqchip.c

@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/acpi_irq.h>
+#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/of_irq.h>
 #include <linux/irqchip.h>
@@ -27,6 +27,5 @@ extern struct of_device_id __irqchip_of_table[];
 void __init irqchip_init(void)
 {
 	of_irq_init(__irqchip_of_table);
-
-	acpi_irq_init();
+	acpi_probe_device_table(irqchip);
 }

include/asm-generic/vmlinux.lds.h

@@ -181,6 +181,16 @@
 #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
 #define EARLYCON_OF_TABLES()	OF_TABLE(CONFIG_SERIAL_EARLYCON, earlycon)
 
+#ifdef CONFIG_ACPI
+#define ACPI_PROBE_TABLE(name)						\
+	. = ALIGN(8);							\
+	VMLINUX_SYMBOL(__##name##_acpi_probe_table) = .;		\
+	*(__##name##_acpi_probe_table)					\
+	VMLINUX_SYMBOL(__##name##_acpi_probe_table_end) = .;
+#else
+#define ACPI_PROBE_TABLE(name)
+#endif
+
 #define KERNEL_DTB()							\
 	STRUCT_ALIGN();							\
 	VMLINUX_SYMBOL(__dtb_start) = .;				\
@@ -514,6 +524,8 @@
 	CPUIDLE_METHOD_OF_TABLES()					\
 	KERNEL_DTB()							\
 	IRQCHIP_OF_MATCH_TABLE()					\
+	ACPI_PROBE_TABLE(irqchip)					\
+	ACPI_PROBE_TABLE(clksrc)					\
 	EARLYCON_TABLE()						\
 	EARLYCON_OF_TABLES()
 

include/linux/acpi.h

@@ -787,6 +787,61 @@ int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
 
 struct fwnode_handle *acpi_get_next_subnode(struct device *dev,
 					    struct fwnode_handle *subnode);
+
+struct acpi_probe_entry;
+typedef bool (*acpi_probe_entry_validate_subtbl)(struct acpi_subtable_header *,
+						 struct acpi_probe_entry *);
+
+#define ACPI_TABLE_ID_LEN	5
+
+/**
+ * struct acpi_probe_entry - boot-time probing entry
+ * @id:			ACPI table name
+ * @type:		Optional subtable type to match
+ *			(if @id contains subtables)
+ * @subtable_valid:	Optional callback to check the validity of
+ *			the subtable
+ * @probe_table:	Callback to the driver being probed when table
+ *			match is successful
+ * @probe_subtbl:	Callback to the driver being probed when table and
+ *			subtable match (and optional callback is successful)
+ * @driver_data:	Sideband data provided back to the driver
+ */
+struct acpi_probe_entry {
+	__u8 id[ACPI_TABLE_ID_LEN];
+	__u8 type;
+	acpi_probe_entry_validate_subtbl subtable_valid;
+	union {
+		acpi_tbl_table_handler probe_table;
+		acpi_tbl_entry_handler probe_subtbl;
+	};
+	kernel_ulong_t driver_data;
+};
+
+#define ACPI_DECLARE_PROBE_ENTRY(table, name, table_id, subtable, valid, data, fn)	\
+	static const struct acpi_probe_entry __acpi_probe_##name	\
+		__used __section(__##table##_acpi_probe_table)		\
+		 = {							\
+			.id = table_id,					\
+			.type = subtable,				\
+			.subtable_valid = valid,			\
+			.probe_table = (acpi_tbl_table_handler)fn,	\
+			.driver_data = data, 				\
+		   }
+
+#define ACPI_PROBE_TABLE(name)		__##name##_acpi_probe_table
+#define ACPI_PROBE_TABLE_END(name)	__##name##_acpi_probe_table_end
+
+int __acpi_probe_device_table(struct acpi_probe_entry *start, int nr);
+
+#define acpi_probe_device_table(t)					\
+	({ 								\
+		extern struct acpi_probe_entry ACPI_PROBE_TABLE(t),	\
+			                       ACPI_PROBE_TABLE_END(t);	\
+		__acpi_probe_device_table(&ACPI_PROBE_TABLE(t),		\
+					  (&ACPI_PROBE_TABLE_END(t) -	\
+					   &ACPI_PROBE_TABLE(t)));	\
+	})
 #else
 static inline int acpi_dev_get_property(struct acpi_device *adev,
 					const char *name, acpi_object_type type,
@@ -845,6 +900,17 @@ static inline struct fwnode_handle *acpi_get_next_subnode(struct device *dev,
 {
 	return NULL;
 }
+
+#define ACPI_DECLARE_PROBE_ENTRY(table, name, table_id, subtable, validate, data, fn) \
+	static const void * __acpi_table_##name[]			\
+		__attribute__((unused))					\
+		 = { (void *) table_id,					\
+		     (void *) subtable,					\
+		     (void *) valid,					\
+		     (void *) fn,					\
+		     (void *) data }
+
+#define acpi_probe_device_table(t)	({ int __r = 0; __r;})
 #endif
 
 #endif	/*_LINUX_ACPI_H*/

include/linux/acpi_irq.h

-#ifndef _LINUX_ACPI_IRQ_H
-#define _LINUX_ACPI_IRQ_H
-
-#include <linux/irq.h>
-
-#ifndef acpi_irq_init
-static inline void acpi_irq_init(void) { }
-#endif
-
-#endif /* _LINUX_ACPI_IRQ_H */

include/linux/clocksource.h

@@ -246,16 +246,13 @@ extern int clocksource_i8253_init(void);
 #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
 	OF_DECLARE_1(clksrc, name, compat, fn)
 
-#ifdef CONFIG_CLKSRC_OF
-extern void clocksource_of_init(void);
+#ifdef CONFIG_CLKSRC_PROBE
+extern void clocksource_probe(void);
 #else
-static inline void clocksource_of_init(void) {}
+static inline void clocksource_probe(void) {}
 #endif
 
-#ifdef CONFIG_ACPI
-void acpi_generic_timer_init(void);
-#else
-static inline void acpi_generic_timer_init(void) { }
-#endif
+#define CLOCKSOURCE_ACPI_DECLARE(name, table_id, fn)		\
+	ACPI_DECLARE_PROBE_ENTRY(clksrc, name, table_id, 0, NULL, 0, fn)
 
 #endif /* _LINUX_CLOCKSOURCE_H */

include/linux/irqchip.h

@@ -11,6 +11,7 @@
 #ifndef _LINUX_IRQCHIP_H
 #define _LINUX_IRQCHIP_H
 
+#include <linux/acpi.h>
 #include <linux/of.h>
 
 /*
@@ -25,6 +26,22 @@
  */
 #define IRQCHIP_DECLARE(name, compat, fn) OF_DECLARE_2(irqchip, name, compat, fn)
 
+/*
+ * This macro must be used by the different irqchip drivers to declare
+ * the association between their version and their initialization function.
+ *
+ * @name: name that must be unique accross all IRQCHIP_ACPI_DECLARE of the
+ * same file.
+ * @subtable: Subtable to be identified in MADT
+ * @validate: Function to be called on that subtable to check its validity.
+ *            Can be NULL.
+ * @data: data to be checked by the validate function.
+ * @fn: initialization function
+ */
+#define IRQCHIP_ACPI_DECLARE(name, subtable, validate, data, fn)	\
+	ACPI_DECLARE_PROBE_ENTRY(irqchip, name, ACPI_SIG_MADT, 		\
+				 subtable, validate, data, fn)
+
 #ifdef CONFIG_IRQCHIP
 void irqchip_init(void);
 #else

include/linux/irqchip/arm-gic-acpi.h

-/*
- * Copyright (C) 2014, Linaro Ltd.
- *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARM_GIC_ACPI_H_
-#define ARM_GIC_ACPI_H_
-
-#ifdef CONFIG_ACPI
-
-/*
- * Hard code here, we can not get memory size from MADT (but FDT does),
- * Actually no need to do that, because this size can be inferred
- * from GIC spec.
- */
-#define ACPI_GICV2_DIST_MEM_SIZE	(SZ_4K)
-#define ACPI_GIC_CPU_IF_MEM_SIZE	(SZ_8K)
-
-struct acpi_table_header;
-
-int gic_v2_acpi_init(struct acpi_table_header *table);
-void acpi_gic_init(void);
-#else
-static inline void acpi_gic_init(void) { }
-#endif
-
-#endif /* ARM_GIC_ACPI_H_ */