Merge tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the latest bug fixes that have come up in the soc tree. Most
  of these are fairly minor. Most notably, the majority of changes this
  time are not for dts files as usual.

   - Updates to the addresses of the broadcom and aspeed entries in the
     MAINTAINERS file.

   - Defconfig updates to address a regression on samsung and a build
     warning from an unknown Kconfig symbol

   - Build fixes for the StrongARM and Uniphier platforms

   - Code fixes for SCMI and FF-A firmware drivers, both of which had a
     simple bug that resulted in invalid data, and a lesser fix for the
     optee firmware driver

   - Multiple fixes for the recently added loongson/loongarch "guts" soc
     driver

   - Devicetree fixes for RISC-V on the startfive platform, addressing
     issues with NOR flash, usb and uart.

   - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
     clock, gpio, hdmi settings and the Makefile

   - Bug fixes for i.MX firmware code and the OCOTP soc driver

   - Multiple fixes for the TI sysc bus driver

   - Minor dts updates for TI omap dts files, to address boot time
     warnings and errors"

* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  MAINTAINERS: Fix Florian Fainelli's email address
  arm64: defconfig: enable syscon-poweroff driver
  ARM: locomo: fix locomolcd_power declaration
  soc: loongson: loongson2_guts: Remove unneeded semicolon
  soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
  soc: loongson: loongson_pm2: Populate children syscon nodes
  dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
  soc: loongson: loongson_pm2: Drop useless of_device_id compatible
  dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
  soc: loongson: loongson_pm2: Add dependency for INPUT
  arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
  ARM: uniphier: fix cache kernel-doc warnings
  MAINTAINERS: aspeed: Update Andrew's email address
  MAINTAINERS: aspeed: Update git tree URL
  firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
  arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
  arm64: dts: imx8mm-evk: Fix hdmi@3d node
  soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
  arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
  arm64: dts: imx8mp: Fix SDMA2/3 clocks
  ...

Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml

@@ -11,11 +11,16 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - loongson,ls2k0500-pmc
-          - loongson,ls2k1000-pmc
-      - const: syscon
+    oneOf:
+      - items:
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - loongson,ls2k1000-pmc
+              - loongson,ls2k2000-pmc
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -32,6 +37,18 @@ properties:
       addition, the PM need according to it to indicate that current
       SoC whether support Suspend To RAM.
 
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
 required:
   - compatible
   - reg
@@ -44,9 +61,23 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     power-management@1fe27000 {
-        compatible = "loongson,ls2k1000-pmc", "syscon";
+        compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
         reg = <0x1fe27000 0x58>;
         interrupt-parent = <&liointc1>;
         interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         loongson,suspend-address = <0x0 0x1c000500>;
+
+        syscon-reboot {
+            compatible = "syscon-reboot";
+            offset = <0x30>;
+            mask = <0x1>;
+        };
+
+        syscon-poweroff {
+            compatible = "syscon-poweroff";
+            regmap = <&pmc>;
+            offset = <0x14>;
+            mask = <0x3c00>;
+            value = <0x3c00>;
+        };
     };

MAINTAINERS

@@ -1963,12 +1963,12 @@ F:	drivers/irqchip/irq-aspeed-i2c-ic.c
 
 ARM/ASPEED MACHINE SUPPORT
 M:	Joel Stanley <joel@jms.id.au>
-R:	Andrew Jeffery <andrew@aj.id.au>
+R:	Andrew Jeffery <andrew@codeconstruct.com.au>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
 S:	Supported
 Q:	https://patchwork.ozlabs.org/project/linux-aspeed/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc.git
 F:	Documentation/devicetree/bindings/arm/aspeed/
 F:	arch/arm/boot/dts/aspeed/
 F:	arch/arm/mach-aspeed/
@@ -3058,7 +3058,7 @@ F:	Documentation/devicetree/bindings/peci/peci-aspeed.yaml
 F:	drivers/peci/controller/peci-aspeed.c
 
 ASPEED PINCTRL DRIVERS
-M:	Andrew Jeffery <andrew@aj.id.au>
+M:	Andrew Jeffery <andrew@codeconstruct.com.au>
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 L:	linux-gpio@vger.kernel.org
@@ -3075,7 +3075,7 @@ F:	drivers/irqchip/irq-aspeed-scu-ic.c
 F:	include/dt-bindings/interrupt-controller/aspeed-scu-ic.h
 
 ASPEED SD/MMC DRIVER
-M:	Andrew Jeffery <andrew@aj.id.au>
+M:	Andrew Jeffery <andrew@codeconstruct.com.au>
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 L:	linux-mmc@vger.kernel.org
@@ -4082,7 +4082,7 @@ F:	drivers/net/wireless/broadcom/brcm80211/
 
 BROADCOM BRCMSTB GPIO DRIVER
 M:	Doug Berger <opendmb@gmail.com>
-M:	Florian Fainelli <florian.fainelli@broadcom>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml

arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi

@@ -614,12 +614,12 @@ &rng_target {
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 &timer9 {
 	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 /*
@@ -640,6 +640,7 @@ &uart1 {
 &uart3 {
 	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x17c>;
+	overrun-throttle-ms = <500>;
 };
 
 &uart4 {

arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi

@@ -12,8 +12,7 @@ cpu_thermal: cpu-thermal {
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;
 
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap>;
 
 	cpu_trips: trips {
 		cpu_alert0: cpu_alert {

arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi

@@ -12,7 +12,10 @@ cpu_thermal: cpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
 	polling-delay = <1000>; /* milliseconds */
 
-			/* sensor       ID */
+	/*
+	 * See 44xx files for single sensor addressing, omap5 and dra7 need
+	 * also sensor ID for addressing.
+	 */
 	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {

arch/arm/boot/dts/ti/omap/omap443x.dtsi

@@ -69,6 +69,7 @@ abb_iva: regulator-abb-iva {
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <0 20000>;
 };
 

arch/arm/boot/dts/ti/omap/omap4460.dtsi

@@ -79,6 +79,7 @@ abb_iva: regulator-abb-iva {
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <348 (-9301)>;
 };
 

arch/arm/include/asm/hardware/locomo.h

@@ -195,7 +195,7 @@ struct locomo_driver {
 
 #define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
 
-void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+extern void locomolcd_power(int on);
 
 int locomo_driver_register(struct locomo_driver *);
 void locomo_driver_unregister(struct locomo_driver *);

arch/arm/mach-omap2/pm44xx.c

@@ -99,7 +99,7 @@ static int omap4_pm_suspend(void)
 		 * possible causes.
 		 * http://www.spinics.net/lists/arm-kernel/msg218641.html
 		 */
-		pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
+		pr_debug("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
 	} else {
 		pr_info("Successfully put all powerdomains to target state\n");
 	}
@@ -257,7 +257,7 @@ int __init omap4_pm_init(void)
 	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
 	 */
 	if (cpu_is_omap44xx())
-		pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
+		pr_debug("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {

arch/arm/mach-sa1100/include/mach/collie.h

@@ -16,8 +16,6 @@
 
 #include "hardware.h" /* Gives GPIO_MAX */
 
-extern void locomolcd_power(int on);
-
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
 #define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
 #define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12

arch/arm/mm/cache-uniphier.c

@@ -58,11 +58,13 @@
 		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
 
 /**
- * uniphier_cache_data - UniPhier outer cache specific data
+ * struct uniphier_cache_data - UniPhier outer cache specific data
  *
  * @ctrl_base: virtual base address of control registers
  * @rev_base: virtual base address of revision registers
  * @op_base: virtual base address of operation registers
+ * @way_ctrl_base: virtual address of the way control registers for this
+ *	SoC revision
  * @way_mask: each bit specifies if the way is present
  * @nsets: number of associativity sets
  * @line_size: line size in bytes

arch/arm64/boot/dts/freescale/Makefile

@@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb

arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

@@ -26,7 +26,7 @@ hdmi-connector {
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -72,6 +72,13 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		enable-active-high;
 	};
 
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000 0>;
@@ -317,15 +324,16 @@ &i2c2 {
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v3p3-supply = <&reg_vddext_3v3>;
+		v1p2-supply = <&buck5_reg>;
 
 		ports {
 			#address-cells = <1>;
@@ -334,7 +342,7 @@ ports {
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -342,7 +350,7 @@ adv7533_in: endpoint {
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -448,7 +456,7 @@ port@1 {
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};

arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts

@@ -381,9 +381,10 @@ &pcie_phy {
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
+			  <&clk IMX8MP_AUDIO_PLL2> ;
 	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-	assigned-clock-rates = <12288000>;
+	assigned-clock-rates = <12288000>, <361267200>;
 	fsl,sai-mclk-direction-output;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -790,6 +790,12 @@ pgc_audio: power-domain@5 {
 						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
 						clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
+						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
+						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
+									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <400000000>,
+								       <600000000>;
 					};
 
 					pgc_gpu2d: power-domain@6 {

arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi

@@ -81,7 +81,7 @@ flash0: flash@0 {
 &gpio1 {
 	pmic-irq-hog {
 		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_LOW>;
+		gpios = <3 GPIO_ACTIVE_LOW>;
 		input;
 		line-name = "PMIC_IRQ#";
 	};

arch/arm64/boot/dts/mediatek/mt8195.dtsi

@@ -2957,7 +2957,7 @@ merge1: vpp-merge@1c10c000 {
 			clock-names = "merge","merge_async";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
-			mediatek,merge-mute = <1>;
+			mediatek,merge-mute;
 			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>;
 		};
 
@@ -2970,7 +2970,7 @@ merge2: vpp-merge@1c10d000 {
 			clock-names = "merge","merge_async";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
-			mediatek,merge-mute = <1>;
+			mediatek,merge-mute;
 			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>;
 		};
 
@@ -2983,7 +2983,7 @@ merge3: vpp-merge@1c10e000 {
 			clock-names = "merge","merge_async";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
-			mediatek,merge-mute = <1>;
+			mediatek,merge-mute;
 			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>;
 		};
 
@@ -2996,7 +2996,7 @@ merge4: vpp-merge@1c10f000 {
 			clock-names = "merge","merge_async";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
-			mediatek,merge-mute = <1>;
+			mediatek,merge-mute;
 			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>;
 		};
 
@@ -3009,7 +3009,7 @@ merge5: vpp-merge@1c110000 {
 			clock-names = "merge","merge_async";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
-			mediatek,merge-fifo-en = <1>;
+			mediatek,merge-fifo-en;
 			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
 		};
 

arch/arm64/configs/defconfig

@@ -636,6 +636,7 @@ CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_NVMEM_REBOOT_MODE=m
 CONFIG_BATTERY_SBS=m
@@ -1175,7 +1176,6 @@ CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_RS9_PCIE=y
 CONFIG_COMMON_CLK_VC5=y
-CONFIG_COMMON_CLK_NPCM8XX=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y

arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi

@@ -262,7 +262,7 @@ uboot@100000 {
 				reg = <0x100000 0x400000>;
 			};
 			reserved-data@600000 {
-				reg = <0x600000 0x1000000>;
+				reg = <0x600000 0xa00000>;
 			};
 		};
 	};
@@ -440,30 +440,6 @@ GPOEN_ENABLE,
 		};
 	};
 
-	uart0_pins: uart0-0 {
-		tx-pins {
-			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
-					     GPOEN_ENABLE,
-					     GPI_NONE)>;
-			bias-disable;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		rx-pins {
-			pinmux = <GPIOMUX(6, GPOUT_LOW,
-					     GPOEN_DISABLE,
-					     GPI_SYS_UART0_RX)>;
-			bias-disable; /* external pull-up */
-			drive-strength = <2>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-	};
-
 	tdm_pins: tdm-0 {
 		tx-pins {
 			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
@@ -497,6 +473,30 @@ GPOEN_DISABLE,
 			input-enable;
 		};
 	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
 };
 
 &tdm {
@@ -513,6 +513,7 @@ &uart0 {
 
 &usb0 {
 	dr_mode = "peripheral";
+	status = "okay";
 };
 
 &U74_1 {

drivers/bus/ti-sysc.c

@@ -38,6 +38,7 @@ enum sysc_soc {
 	SOC_2420,
 	SOC_2430,
 	SOC_3430,
+	SOC_AM35,
 	SOC_3630,
 	SOC_4430,
 	SOC_4460,
@@ -1097,6 +1098,11 @@ static int sysc_enable_module(struct device *dev)
 	if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE |
 				 SYSC_QUIRK_SWSUP_SIDLE_ACT)) {
 		best_mode = SYSC_IDLE_NO;
+
+		/* Clear WAKEUP */
+		if (regbits->enwkup_shift >= 0 &&
+		    ddata->cfg.sysc_val & BIT(regbits->enwkup_shift))
+			reg &= ~BIT(regbits->enwkup_shift);
 	} else {
 		best_mode = fls(ddata->cfg.sidlemodes) - 1;
 		if (best_mode > SYSC_IDLE_MASK) {
@@ -1224,6 +1230,13 @@ static int sysc_disable_module(struct device *dev)
 		}
 	}
 
+	if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) {
+		/* Set WAKEUP */
+		if (regbits->enwkup_shift >= 0 &&
+		    ddata->cfg.sysc_val & BIT(regbits->enwkup_shift))
+			reg |= BIT(regbits->enwkup_shift);
+	}
+
 	reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift);
 	reg |= best_mode << regbits->sidle_shift;
 	if (regbits->autoidle_shift >= 0 &&
@@ -1518,16 +1531,16 @@ struct sysc_revision_quirk {
 static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* These drivers need to be fixed to not use pm_runtime_irq_safe() */
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 
 	/* Quirks that need to be set based on the module address */
 	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@@ -1862,7 +1875,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 		dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n",
 			 __func__, val, irq_mask);
 
-	if (sysc_soc->soc == SOC_3430) {
+	if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) {
 		/* Clear DSS_SDI_CONTROL */
 		sysc_write(ddata, 0x44, 0);
 
@@ -2150,8 +2163,7 @@ static int sysc_reset(struct sysc *ddata)
 	}
 
 	if (ddata->cfg.srst_udelay)
-		usleep_range(ddata->cfg.srst_udelay,
-			     ddata->cfg.srst_udelay * 2);
+		fsleep(ddata->cfg.srst_udelay);
 
 	if (ddata->post_reset_quirk)
 		ddata->post_reset_quirk(ddata);
@@ -3025,6 +3037,7 @@ static void ti_sysc_idle(struct work_struct *work)
 static const struct soc_device_attribute sysc_soc_match[] = {
 	SOC_FLAG("OMAP242*", SOC_2420),
 	SOC_FLAG("OMAP243*", SOC_2430),
+	SOC_FLAG("AM35*", SOC_AM35),
 	SOC_FLAG("OMAP3[45]*", SOC_3430),
 	SOC_FLAG("OMAP3[67]*", SOC_3630),
 	SOC_FLAG("OMAP443*", SOC_4430),
@@ -3229,7 +3242,7 @@ static int sysc_check_active_timer(struct sysc *ddata)
 	 * can be dropped if we stop supporting old beagleboard revisions
 	 * A to B4 at some point.
 	 */
-	if (sysc_soc->soc == SOC_3430)
+	if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35)
 		error = -ENXIO;
 	else
 		error = -EBUSY;

drivers/firmware/arm_ffa/driver.c

@@ -397,6 +397,19 @@ static u32 ffa_get_num_pages_sg(struct scatterlist *sg)
 	return num_pages;
 }
 
+static u8 ffa_memory_attributes_get(u32 func_id)
+{
+	/*
+	 * For the memory lend or donate operation, if the receiver is a PE or
+	 * a proxy endpoint, the owner/sender must not specify the attributes
+	 */
+	if (func_id == FFA_FN_NATIVE(MEM_LEND) ||
+	    func_id == FFA_MEM_LEND)
+		return 0;
+
+	return FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK | FFA_MEM_INNER_SHAREABLE;
+}
+
 static int
 ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize,
 		       struct ffa_mem_ops_args *args)
@@ -413,8 +426,7 @@ ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize,
 	mem_region->tag = args->tag;
 	mem_region->flags = args->flags;
 	mem_region->sender_id = drv_info->vm_id;
-	mem_region->attributes = FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK |
-				 FFA_MEM_INNER_SHAREABLE;
+	mem_region->attributes = ffa_memory_attributes_get(func_id);
 	ep_mem_access = &mem_region->ep_mem_access[0];
 
 	for (idx = 0; idx < args->nattrs; idx++, ep_mem_access++) {

drivers/firmware/arm_scmi/perf.c

@@ -1080,6 +1080,8 @@ static int scmi_perf_protocol_init(const struct scmi_protocol_handle *ph)
 	if (!pinfo)
 		return -ENOMEM;
 
+	pinfo->version = version;
+
 	ret = scmi_perf_attributes_get(ph, pinfo);
 	if (ret)
 		return ret;
@@ -1104,8 +1106,6 @@ static int scmi_perf_protocol_init(const struct scmi_protocol_handle *ph)
 	if (ret)
 		return ret;
 
-	pinfo->version = version;
-
 	return ph->set_priv(ph, pinfo);
 }
 

drivers/firmware/imx/imx-dsp.c

@@ -114,6 +114,7 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
 		dsp_chan->idx = i % 2;
 		dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
 		if (IS_ERR(dsp_chan->ch)) {
+			kfree(dsp_chan->name);
 			ret = PTR_ERR(dsp_chan->ch);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to request mbox chan %s ret %d\n",

drivers/soc/imx/soc-imx8m.c

@@ -100,6 +100,7 @@ static void __init imx8mm_soc_uid(void)
 {
 	void __iomem *ocotp_base;
 	struct device_node *np;
+	struct clk *clk;
 	u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
 		     IMX8MP_OCOTP_UID_OFFSET : 0;
 
@@ -109,11 +110,20 @@ static void __init imx8mm_soc_uid(void)
 
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
+	clk = of_clk_get_by_name(np, NULL);
+	if (IS_ERR(clk)) {
+		WARN_ON(IS_ERR(clk));
+		return;
+	}
+
+	clk_prepare_enable(clk);
 
 	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
 	soc_uid <<= 32;
 	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
 
+	clk_disable_unprepare(clk);
+	clk_put(clk);
 	iounmap(ocotp_base);
 	of_node_put(np);
 }

drivers/soc/loongson/Kconfig

@@ -20,6 +20,7 @@ config LOONGSON2_GUTS
 config LOONGSON2_PM
 	bool "Loongson-2 SoC Power Management Controller Driver"
 	depends on LOONGARCH && OF
+	depends on INPUT=y
 	help
 	  The Loongson-2's power management controller was ACPI, supports ACPI
 	  S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To

drivers/soc/loongson/loongson2_guts.c

@@ -70,7 +70,7 @@ static const struct loongson2_soc_die_attr *loongson2_soc_die_match(
 		if (matches->svr == (svr & matches->mask))
 			return matches;
 		matches++;
-	};
+	}
 
 	return NULL;
 }
@@ -94,7 +94,6 @@ static int loongson2_guts_probe(struct platform_device *pdev)
 {
 	struct device_node *root, *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	const struct loongson2_soc_die_attr *soc_die;
 	const char *machine;
 	u32 svr;
@@ -106,8 +105,7 @@ static int loongson2_guts_probe(struct platform_device *pdev)
 
 	guts->little_endian = of_property_read_bool(np, "little-endian");
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	guts->regs = ioremap(res->start, res->end - res->start + 1);
+	guts->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(guts->regs))
 		return PTR_ERR(guts->regs);
 

drivers/soc/loongson/loongson2_pm.c

@@ -11,6 +11,7 @@
 #include <linux/input.h>
 #include <linux/suspend.h>
 #include <linux/interrupt.h>
+#include <linux/of_platform.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/platform_device.h>
 #include <asm/bootinfo.h>
@@ -192,12 +193,16 @@ static int loongson2_pm_probe(struct platform_device *pdev)
 	if (loongson_sysconf.suspend_addr)
 		suspend_set_ops(&loongson2_suspend_ops);
 
+	/* Populate children */
+	retval = devm_of_platform_populate(dev);
+	if (retval)
+		dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");
+
 	return 0;
 }
 
 static const struct of_device_id loongson2_pm_match[] = {
 	{ .compatible = "loongson,ls2k0500-pmc", },
-	{ .compatible = "loongson,ls2k1000-pmc", },
 	{},
 };
 

drivers/tee/optee/optee_private.h

@@ -238,8 +238,6 @@ int optee_notif_send(struct optee *optee, u_int key);
 u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
 			struct tee_param *param);
 
-int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len);
-int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len);
 void optee_supp_init(struct optee_supp *supp);
 void optee_supp_uninit(struct optee_supp *supp);
 void optee_supp_release(struct optee_supp *supp);

drivers/tee/tee_private.h

@@ -47,8 +47,6 @@ struct tee_device {
 	struct tee_shm_pool *pool;
 };
 
-int tee_shm_init(void);
-
 int tee_shm_get_fd(struct tee_shm *shm);
 
 bool tee_device_get(struct tee_device *teedev);