Commit e4334fa4 authored by Phil Dibowitz's avatar Phil Dibowitz Committed by Greg K-H

[PATCH] Fix GO_SLOW delay

This patch changes the delay for the US_FL_GO_SLOW patch from 110us to 125.
Some delays need this extra delay includign Jan De Luyck's drive which spawned
the original increase from 110 to 110us. 125 is a microframe, so this delay
seems to make sense more than just be a random delay (thanks to David Brownell
for pointing that out after my original patch).
Signed-off-by: default avatarPhil Dibowitz <phil@ipom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/storage/transport.c
===================================================================
parent 403a9817
...@@ -996,7 +996,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) ...@@ -996,7 +996,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
* command phase and the data phase. Some devices need a little * command phase and the data phase. Some devices need a little
* more than that, probably because of clock rate inaccuracies. */ * more than that, probably because of clock rate inaccuracies. */
if (unlikely(us->flags & US_FL_GO_SLOW)) if (unlikely(us->flags & US_FL_GO_SLOW))
udelay(110); udelay(125);
if (transfer_length) { if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment