Commit e435a6b5 authored by Guangbin Huang's avatar Guangbin Huang Committed by David S. Miller

net: hns3: PF support get unicast MAC address space assigned by firmware

Currently, there are two ways for PF to set the unicast MAC address space
size: specified by config parameters in firmware or set to default value.

That's mean if the config parameters in firmware is zero, driver will
divide the whole unicast MAC address space equally to 8 PFs. However, in
this case, the unicast MAC address space will be wasted a lot when the
hardware actually has less then 8 PFs. And in the other hand, if one PF has
much more VFs than other PFs, then each function of this PF will has much
less address space than other PFs.

In order to ameliorate the above two situations, introduce the third way
of unicast MAC address space assignment: firmware divides the whole unicast
MAC address space equally to functions of all PFs, and calculates the space
size of each PF according to its function number. PF queries the space size
by the querying device specification command when in initialization
process.

The third way assignment is lower priority than specified by config
parameters, only if the config parameters is zero can be used, and if
firmware does not support the third way assignment, then driver still
divides the whole unicast MAC address space equally to 8 PFs.
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0ccf8511
......@@ -341,6 +341,7 @@ struct hnae3_dev_specs {
u8 max_non_tso_bd_num; /* max BD number of one non-TSO packet */
u16 max_frm_size;
u16 max_qset_num;
u16 umv_size;
};
struct hnae3_client_ops {
......
......@@ -924,6 +924,8 @@ hns3_dbg_dev_specs(struct hnae3_handle *h, char *buf, int len, int *pos)
dev_specs->max_tm_rate);
*pos += scnprintf(buf + *pos, len - *pos, "MAX QSET number: %u\n",
dev_specs->max_qset_num);
*pos += scnprintf(buf + *pos, len - *pos, "umv size: %u\n",
dev_specs->umv_size);
}
static int hns3_dbg_dev_info(struct hnae3_handle *h, char *buf, int len)
......
......@@ -1188,7 +1188,9 @@ struct hclge_dev_specs_1_cmd {
__le16 max_frm_size;
__le16 max_qset_num;
__le16 max_int_gl;
u8 rsv1[18];
u8 rsv0[2];
__le16 umv_size;
u8 rsv1[14];
};
/* mac speed type defined in firmware command */
......
......@@ -1342,8 +1342,6 @@ static void hclge_parse_cfg(struct hclge_cfg *cfg, struct hclge_desc *desc)
cfg->umv_space = hnae3_get_field(__le32_to_cpu(req->param[1]),
HCLGE_CFG_UMV_TBL_SPACE_M,
HCLGE_CFG_UMV_TBL_SPACE_S);
if (!cfg->umv_space)
cfg->umv_space = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
cfg->pf_rss_size_max = hnae3_get_field(__le32_to_cpu(req->param[2]),
HCLGE_CFG_PF_RSS_SIZE_M,
......@@ -1419,6 +1417,7 @@ static void hclge_set_default_dev_specs(struct hclge_dev *hdev)
ae_dev->dev_specs.max_int_gl = HCLGE_DEF_MAX_INT_GL;
ae_dev->dev_specs.max_frm_size = HCLGE_MAC_MAX_FRAME;
ae_dev->dev_specs.max_qset_num = HCLGE_MAX_QSET_NUM;
ae_dev->dev_specs.umv_size = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
}
static void hclge_parse_dev_specs(struct hclge_dev *hdev,
......@@ -1440,6 +1439,7 @@ static void hclge_parse_dev_specs(struct hclge_dev *hdev,
ae_dev->dev_specs.max_qset_num = le16_to_cpu(req1->max_qset_num);
ae_dev->dev_specs.max_int_gl = le16_to_cpu(req1->max_int_gl);
ae_dev->dev_specs.max_frm_size = le16_to_cpu(req1->max_frm_size);
ae_dev->dev_specs.umv_size = le16_to_cpu(req1->umv_size);
}
static void hclge_check_dev_specs(struct hclge_dev *hdev)
......@@ -1460,6 +1460,8 @@ static void hclge_check_dev_specs(struct hclge_dev *hdev)
dev_specs->max_int_gl = HCLGE_DEF_MAX_INT_GL;
if (!dev_specs->max_frm_size)
dev_specs->max_frm_size = HCLGE_MAC_MAX_FRAME;
if (!dev_specs->umv_size)
dev_specs->umv_size = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
}
static int hclge_query_dev_specs(struct hclge_dev *hdev)
......@@ -1548,7 +1550,10 @@ static int hclge_configure(struct hclge_dev *hdev)
hdev->tm_info.num_pg = 1;
hdev->tc_max = cfg.tc_num;
hdev->tm_info.hw_pfc_map = 0;
hdev->wanted_umv_size = cfg.umv_space;
if (cfg.umv_space)
hdev->wanted_umv_size = cfg.umv_space;
else
hdev->wanted_umv_size = hdev->ae_dev->dev_specs.umv_size;
hdev->tx_spare_buf_size = cfg.tx_spare_buf_size;
hdev->gro_en = true;
if (cfg.vlan_fliter_cap == HCLGE_VLAN_FLTR_CAN_MDF)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment