Commit e47a8b17 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'omap-for-v4.10/fixes-rc4' of...

Merge tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for
omap1, and then a handful of trivial fixes for boards and devices to
work:

- Fixes TI wilink bluetooth strange platform data baud rate
- Remove duplicate pinmux line for am335x-icev2
- Fix omap1 dma regression
- Fix uninitialized return value for wkup_m3_ipc_probe()
- Fix Ethernet PHY binding typo for dra72-evm
- Fix init for omap5 and dra7 sata ports
- Fix mmc card detect pin for Logic PD SOM-LV

* tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV
  ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.
  ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node
  soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()
  ARM: OMAP1: DMA: Correct the number of logical channels
  ARM: dts: am335x-icev2: Remove the duplicated pinmux setting
  ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents f7bcd4b6 1ea6af32
......@@ -170,7 +170,6 @@ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 *
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
>;
};
......
......@@ -1378,6 +1378,7 @@ sata: sata@4a141100 {
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
ports-implemented = <0x1>;
};
rtc: rtc@48838000 {
......
......@@ -75,6 +75,6 @@ dp83867_1: ethernet-phy@3 {
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-imepdance;
ti,min-output-impedance;
};
};
......@@ -158,7 +158,7 @@ bl: backlight {
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins &mmc1_cd>;
pinctrl-0 = <&mmc1_pins>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */
vmmc-supply = <&vmmc1>;
......@@ -193,7 +193,8 @@ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/
OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */
OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
>;
};
......@@ -242,12 +243,6 @@ backlight_pins: pinmux_backlight_pins {
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */
>;
};
mmc1_cd: pinmux_mmc1_cd {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
>;
};
};
......
......@@ -988,6 +988,7 @@ sata: sata@4a141100 {
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
ports-implemented = <0x1>;
};
dss: dss@58000000 {
......
......@@ -32,7 +32,6 @@
#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
static u32 enable_1510_mode;
......@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
goto exit_iounmap;
}
d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
/* Valid attributes for omap1 plus processors */
if (cpu_is_omap15xx())
d->dev_caps = ENABLE_1510_MODE;
......@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
d->dev_caps |= CLEAR_CSR_ON_READ;
d->dev_caps |= IS_WORD_16;
if (cpu_is_omap15xx())
d->chan_count = 9;
else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
if (!(d->dev_caps & ENABLE_1510_MODE))
d->chan_count = 16;
/* available logical channels */
if (cpu_is_omap15xx()) {
d->lch_count = 9;
} else {
if (d->dev_caps & ENABLE_1510_MODE)
d->lch_count = 9;
else
d->chan_count = 9;
d->lch_count = 16;
}
p = dma_plat_info;
......
......@@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = {
.nshutdown_gpio = 162,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 300000,
.baud_rate = 3000000,
};
static struct platform_device wl128x_device = {
......
......@@ -459,6 +459,7 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
if (IS_ERR(task)) {
dev_err(dev, "can't create rproc_boot thread\n");
ret = PTR_ERR(task);
goto err_put_rproc;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment