Commit e481a528 authored by Magnus Damm's avatar Magnus Damm Committed by Simon Horman

ARM: shmobile: r8a73a4 SCIF support V3

V3 of SCIF serial port support for the r8a73a4 SoC.
This is done by adding platform devices for SCIFA0
-> SCIFA1 as well as SCIFB0 -> SCIFB3 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.
Signed-off-by: default avatarMagnus Damm <damm@opensource.se>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent eccf0607
......@@ -28,6 +28,7 @@
#define CPG_LEN 0x270
#define MPCKCR 0xe6150080
#define SMSTPCR2 0xe6150138
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
......@@ -55,11 +56,23 @@ static struct clk *main_clks[] = {
&extal2_clk,
};
enum { MSTP_NR };
enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
[MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
};
static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
};
void __init r8a73a4_clock_init(void)
......
......@@ -21,13 +21,56 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach/arch.h>
#define SCIF_COMMON(scif_type, baseaddr, irq) \
.type = scif_type, \
.mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scbrr_algo_id = SCBRR_ALGO_4, \
.irqs = SCIx_IRQ_MUXED(irq)
#define SCIFA_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
}
#define SCIFB_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
.scscr = SCSCR_RE | SCSCR_TE, \
}
enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
static const struct plat_sci_port scif[] = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
};
static inline void r8a73a4_register_scif(int idx)
{
platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
sizeof(struct plat_sci_port));
}
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_register_scif(SCIFA0);
r8a73a4_register_scif(SCIFA1);
r8a73a4_register_scif(SCIFB0);
r8a73a4_register_scif(SCIFB1);
r8a73a4_register_scif(SCIFB2);
r8a73a4_register_scif(SCIFB3);
}
#ifdef CONFIG_USE_OF
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment