Commit e4b317e9 authored by Alexander Duyck's avatar Alexander Duyck Committed by Jeff Kirsher

ixgbe: Add feature offset value to ring features

The mask value for ring features was overloaded for FCoE which can lead to
some confusion.  In order to avoid any confusion I am splitting the mask
value and adding an offset value.  This can be used for the start of the
FCoE rings, and in the future I hope to use it to store the start of the
registers for SR-IOV.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent c087663e
......@@ -280,7 +280,8 @@ enum ixgbe_ring_f_enum {
struct ixgbe_ring_feature {
u16 limit; /* upper limit on feature indices */
u16 indices; /* current value of indices */
int mask;
u16 mask; /* Mask used for feature to ring mapping */
u16 offset; /* offset to start of feature */
} ____cacheline_internodealigned_in_smp;
/*
......
......@@ -674,7 +674,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
if (adapter->ring_feature[RING_F_FCOE].indices) {
/* Use multiple rx queues for FCoE by redirection table */
for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
fcoe_i = f->mask + i % f->indices;
fcoe_i = f->offset + i % f->indices;
fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
......@@ -683,7 +683,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
} else {
/* Use single rx queue for FCoE */
fcoe_i = f->mask;
fcoe_i = f->offset;
fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
......@@ -691,7 +691,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
}
/* send FIP frames to the first FCoE queue */
fcoe_i = f->mask;
fcoe_i = f->offset;
fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
IXGBE_ETQS_QUEUE_EN |
......
......@@ -185,12 +185,12 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
else
ixgbe_cache_ring_rss(adapter);
fcoe_rx_i = f->mask;
fcoe_tx_i = f->mask;
fcoe_rx_i = f->offset;
fcoe_tx_i = f->offset;
}
for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i;
adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i;
adapter->rx_ring[f->offset + i]->reg_idx = fcoe_rx_i;
adapter->tx_ring[f->offset + i]->reg_idx = fcoe_tx_i;
}
return true;
}
......@@ -327,10 +327,7 @@ static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
* @adapter: board private structure to initialize
*
* FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
* The ring feature mask is not used as a mask for FCoE, as it can take any 8
* rx queues out of the max number of rx queues, instead, it is used as the
* index of the first rx queue used by FCoE.
*
* Offset is used as the index of the first rx queue used by FCoE.
**/
static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
{
......@@ -353,7 +350,7 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
}
/* adding FCoE rx rings to the end */
f->mask = adapter->num_rx_queues;
f->offset = adapter->num_rx_queues;
adapter->num_rx_queues += f->indices;
adapter->num_tx_queues += f->indices;
......@@ -388,7 +385,7 @@ static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
#ifdef IXGBE_FCOE
/* FCoE enabled queues require special configuration indexed
* by feature specific indices and mask. Here we map FCoE
* by feature specific indices and offset. Here we map FCoE
* indices onto the DCB queue pairs allowing FCoE to own
* configuration later.
*/
......@@ -401,7 +398,7 @@ static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
ixgbe_dcb_unpack_map(&adapter->dcb_cfg, DCB_TX_CONFIG, prio_tc);
tc = prio_tc[adapter->fcoe.up];
f->indices = dev->tc_to_txq[tc].count;
f->mask = dev->tc_to_txq[tc].offset;
f->offset = dev->tc_to_txq[tc].offset;
}
#endif
......@@ -632,8 +629,8 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter,
if (adapter->netdev->features & NETIF_F_FCOE_MTU) {
struct ixgbe_ring_feature *f;
f = &adapter->ring_feature[RING_F_FCOE];
if ((rxr_idx >= f->mask) &&
(rxr_idx < f->mask + f->indices))
if ((rxr_idx >= f->offset) &&
(rxr_idx < f->offset + f->indices))
set_bit(__IXGBE_RX_FCOE, &ring->state);
}
......
......@@ -6211,7 +6211,7 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
while (txq >= f->indices)
txq -= f->indices;
txq += adapter->ring_feature[RING_F_FCOE].mask;
txq += adapter->ring_feature[RING_F_FCOE].offset;
return txq;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment