scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param

ufshcd_get_pwr_dev_param function and ufs_dev_params struct have been
relocated to ufs core. Switch ufs-qcom to the common interface.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ufs/ufs-qcom.c

@@ -595,104 +595,6 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	return err;
 }
 
-struct ufs_qcom_dev_params {
-	u32 pwm_rx_gear;	/* pwm rx gear to work in */
-	u32 pwm_tx_gear;	/* pwm tx gear to work in */
-	u32 hs_rx_gear;		/* hs rx gear to work in */
-	u32 hs_tx_gear;		/* hs tx gear to work in */
-	u32 rx_lanes;		/* number of rx lanes */
-	u32 tx_lanes;		/* number of tx lanes */
-	u32 rx_pwr_pwm;		/* rx pwm working pwr */
-	u32 tx_pwr_pwm;		/* tx pwm working pwr */
-	u32 rx_pwr_hs;		/* rx hs working pwr */
-	u32 tx_pwr_hs;		/* tx hs working pwr */
-	u32 hs_rate;		/* rate A/B to work in HS */
-	u32 desired_working_mode;
-};
-
-static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
-				      struct ufs_pa_layer_attr *dev_max,
-				      struct ufs_pa_layer_attr *agreed_pwr)
-{
-	int min_qcom_gear;
-	int min_dev_gear;
-	bool is_dev_sup_hs = false;
-	bool is_qcom_max_hs = false;
-
-	if (dev_max->pwr_rx == FAST_MODE)
-		is_dev_sup_hs = true;
-
-	if (qcom_param->desired_working_mode == FAST) {
-		is_qcom_max_hs = true;
-		min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear,
-				      qcom_param->hs_tx_gear);
-	} else {
-		min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear,
-				      qcom_param->pwm_tx_gear);
-	}
-
-	/*
-	 * device doesn't support HS but qcom_param->desired_working_mode is
-	 * HS, thus device and qcom_param don't agree
-	 */
-	if (!is_dev_sup_hs && is_qcom_max_hs) {
-		pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n",
-			__func__);
-		return -ENOTSUPP;
-	} else if (is_dev_sup_hs && is_qcom_max_hs) {
-		/*
-		 * since device supports HS, it supports FAST_MODE.
-		 * since qcom_param->desired_working_mode is also HS
-		 * then final decision (FAST/FASTAUTO) is done according
-		 * to qcom_params as it is the restricting factor
-		 */
-		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-						qcom_param->rx_pwr_hs;
-	} else {
-		/*
-		 * here qcom_param->desired_working_mode is PWM.
-		 * it doesn't matter whether device supports HS or PWM,
-		 * in both cases qcom_param->desired_working_mode will
-		 * determine the mode
-		 */
-		 agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-						qcom_param->rx_pwr_pwm;
-	}
-
-	/*
-	 * we would like tx to work in the minimum number of lanes
-	 * between device capability and vendor preferences.
-	 * the same decision will be made for rx
-	 */
-	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
-						qcom_param->tx_lanes);
-	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
-						qcom_param->rx_lanes);
-
-	/* device maximum gear is the minimum between device rx and tx gears */
-	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
-
-	/*
-	 * if both device capabilities and vendor pre-defined preferences are
-	 * both HS or both PWM then set the minimum gear to be the chosen
-	 * working gear.
-	 * if one is PWM and one is HS then the one that is PWM get to decide
-	 * what is the gear, as it is the one that also decided previously what
-	 * pwr the device will be configured to.
-	 */
-	if ((is_dev_sup_hs && is_qcom_max_hs) ||
-	    (!is_dev_sup_hs && !is_qcom_max_hs))
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx =
-			min_t(u32, min_dev_gear, min_qcom_gear);
-	else if (!is_dev_sup_hs)
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear;
-	else
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear;
-
-	agreed_pwr->hs_rate = qcom_param->hs_rate;
-	return 0;
-}
-
 #ifdef CONFIG_MSM_BUS_SCALING
 static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
 		const char *speed_mode)
@@ -920,7 +822,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 {
 	u32 val;
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct ufs_qcom_dev_params ufs_qcom_cap;
+	struct ufs_dev_params ufs_qcom_cap;
 	int ret = 0;
 
 	if (!dev_req_params) {
@@ -959,9 +861,9 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 				ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
 		}
 
-		ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
-						 dev_max_params,
-						 dev_req_params);
+		ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap,
+					       dev_max_params,
+					       dev_req_params);
 		if (ret) {
 			pr_err("%s: failed to determine capabilities\n",
 					__func__);