Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

Nguyen, Anthony L says:

====================
Intel Wired LAN Driver Updates 2021-05-07

This series contains updates to i40e driver only.

Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.

Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.

Jaroslaw forces link reset when changing FEC so that changes take
affect.

Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.

Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Remove LLDP frame filters
  i40e: Fix PHY type identifiers for 2.5G and 5G adapters
  i40e: fix the restart auto-negotiation after FEC modified
  i40e: Fix use-after-free in i40e_client_subtask()
  i40e: fix broken XDP support
====================

Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -1144,7 +1144,6 @@ static inline bool i40e_is_sw_dcb(struct i40e_pf *pf)
 	return !!(pf->flags & I40E_FLAG_DISABLE_FW_LLDP);
 }
 
-void i40e_set_lldp_forwarding(struct i40e_pf *pf, bool enable);
 #ifdef CONFIG_I40E_DCB
 void i40e_dcbnl_flush_apps(struct i40e_pf *pf,
 			   struct i40e_dcbx_config *old_cfg,

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -1566,8 +1566,10 @@ enum i40e_aq_phy_type {
 	I40E_PHY_TYPE_25GBASE_LR		= 0x22,
 	I40E_PHY_TYPE_25GBASE_AOC		= 0x23,
 	I40E_PHY_TYPE_25GBASE_ACC		= 0x24,
-	I40E_PHY_TYPE_2_5GBASE_T		= 0x30,
-	I40E_PHY_TYPE_5GBASE_T			= 0x31,
+	I40E_PHY_TYPE_2_5GBASE_T		= 0x26,
+	I40E_PHY_TYPE_5GBASE_T			= 0x27,
+	I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS	= 0x30,
+	I40E_PHY_TYPE_5GBASE_T_LINK_STATUS	= 0x31,
 	I40E_PHY_TYPE_MAX,
 	I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP	= 0xFD,
 	I40E_PHY_TYPE_EMPTY			= 0xFE,

drivers/net/ethernet/intel/i40e/i40e_client.c

@@ -375,6 +375,7 @@ void i40e_client_subtask(struct i40e_pf *pf)
 				clear_bit(__I40E_CLIENT_INSTANCE_OPENED,
 					  &cdev->state);
 				i40e_client_del_instance(pf);
+				return;
 			}
 		}
 	}

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -1154,8 +1154,8 @@ static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw)
 		break;
 	case I40E_PHY_TYPE_100BASE_TX:
 	case I40E_PHY_TYPE_1000BASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_10GBASE_T:
 		media = I40E_MEDIA_TYPE_BASET;
 		break;

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -841,8 +841,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 							     10000baseT_Full);
 		break;
 	case I40E_PHY_TYPE_10GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_1000BASE_T:
 	case I40E_PHY_TYPE_100BASE_TX:
 		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
@@ -1409,7 +1409,8 @@ static int i40e_set_fec_cfg(struct net_device *netdev, u8 fec_cfg)
 
 		memset(&config, 0, sizeof(config));
 		config.phy_type = abilities.phy_type;
-		config.abilities = abilities.abilities;
+		config.abilities = abilities.abilities |
+				   I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
 		config.phy_type_ext = abilities.phy_type_ext;
 		config.link_speed = abilities.link_speed;
 		config.eee_capability = abilities.eee_capability;
@@ -5281,7 +5282,6 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 			i40e_aq_cfg_lldp_mib_change_event(&pf->hw, false, NULL);
 			i40e_aq_stop_lldp(&pf->hw, true, false, NULL);
 		} else {
-			i40e_set_lldp_forwarding(pf, false);
 			status = i40e_aq_start_lldp(&pf->hw, false, NULL);
 			if (status) {
 				adq_err = pf->hw.aq.asq_last_status;

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -6879,40 +6879,6 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
 }
 #endif /* CONFIG_I40E_DCB */
 
-/**
- * i40e_set_lldp_forwarding - set forwarding of lldp frames
- * @pf: PF being configured
- * @enable: if forwarding to OS shall be enabled
- *
- * Toggle forwarding of lldp frames behavior,
- * When passing DCB control from firmware to software
- * lldp frames must be forwarded to the software based
- * lldp agent.
- */
-void i40e_set_lldp_forwarding(struct i40e_pf *pf, bool enable)
-{
-	if (pf->lan_vsi == I40E_NO_VSI)
-		return;
-
-	if (!pf->vsi[pf->lan_vsi])
-		return;
-
-	/* No need to check the outcome, commands may fail
-	 * if desired value is already set
-	 */
-	i40e_aq_add_rem_control_packet_filter(&pf->hw, NULL, ETH_P_LLDP,
-					      I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TX |
-					      I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC,
-					      pf->vsi[pf->lan_vsi]->seid, 0,
-					      enable, NULL, NULL);
-
-	i40e_aq_add_rem_control_packet_filter(&pf->hw, NULL, ETH_P_LLDP,
-					      I40E_AQC_ADD_CONTROL_PACKET_FLAGS_RX |
-					      I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC,
-					      pf->vsi[pf->lan_vsi]->seid, 0,
-					      enable, NULL, NULL);
-}
-
 /**
  * i40e_print_link_message - print link up or down
  * @vsi: the VSI for which link needs a message
@@ -10736,10 +10702,6 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	 */
 	i40e_add_filter_to_drop_tx_flow_control_frames(&pf->hw,
 						       pf->main_vsi_seid);
-#ifdef CONFIG_I40E_DCB
-	if (pf->flags & I40E_FLAG_DISABLE_FW_LLDP)
-		i40e_set_lldp_forwarding(pf, true);
-#endif /* CONFIG_I40E_DCB */
 
 	/* restart the VSIs that were rebuilt and running before the reset */
 	i40e_pf_unquiesce_all_vsi(pf);
@@ -15772,10 +15734,6 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	i40e_add_filter_to_drop_tx_flow_control_frames(&pf->hw,
 						       pf->main_vsi_seid);
-#ifdef CONFIG_I40E_DCB
-	if (pf->flags & I40E_FLAG_DISABLE_FW_LLDP)
-		i40e_set_lldp_forwarding(pf, true);
-#endif /* CONFIG_I40E_DCB */
 
 	if ((pf->hw.device_id == I40E_DEV_ID_10G_BASE_T) ||
 		(pf->hw.device_id == I40E_DEV_ID_10G_BASE_T4))

drivers/net/ethernet/intel/i40e/i40e_txrx.c

@@ -1961,10 +1961,6 @@ static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb,
 				 union i40e_rx_desc *rx_desc)
 
 {
-	/* XDP packets use error pointer so abort at this point */
-	if (IS_ERR(skb))
-		return true;
-
 	/* ERR_MASK will only have valid bits if EOP set, and
 	 * what we are doing here is actually checking
 	 * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
@@ -2534,7 +2530,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 		}
 
 		/* exit if we failed to retrieve a buffer */
-		if (!skb) {
+		if (!xdp_res && !skb) {
 			rx_ring->rx_stats.alloc_buff_failed++;
 			rx_buffer->pagecnt_bias++;
 			break;
@@ -2547,7 +2543,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 		if (i40e_is_non_eop(rx_ring, rx_desc))
 			continue;
 
-		if (i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
+		if (xdp_res || i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
 			skb = NULL;
 			continue;
 		}

drivers/net/ethernet/intel/i40e/i40e_type.h

@@ -239,11 +239,8 @@ struct i40e_phy_info {
 #define I40E_CAP_PHY_TYPE_25GBASE_ACC BIT_ULL(I40E_PHY_TYPE_25GBASE_ACC + \
 					     I40E_PHY_TYPE_OFFSET)
 /* Offset for 2.5G/5G PHY Types value to bit number conversion */
-#define I40E_PHY_TYPE_OFFSET2 (-10)
-#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T + \
-					     I40E_PHY_TYPE_OFFSET2)
-#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T + \
-					     I40E_PHY_TYPE_OFFSET2)
+#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T)
+#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T)
 #define I40E_HW_CAP_MAX_GPIO			30
 /* Capabilities of a PF or a VF or the whole device */
 struct i40e_hw_capabilities {