Commit e4d8318a authored by Sebastian Andrzej Siewior's avatar Sebastian Andrzej Siewior Committed by Sarah Sharp

usb/uas: make sure data urb is gone if we receive status before that

Just run into the following:
- new disk arrived in the system
- udev couldn't wait to get its hands on to to run ata_id /dev/sda
- this sent the cdb 0xa1 to the device.
- my UAS-gadget recevied the cdb and had no idea what to do with it. It
  decided to send a status URB back with sense set to invalid opcode.
- the host side received it status and completed the scsi command.
- the host sent another scsi with 4kib data buffer
- Now I was confused why the data transfer is only 512 bytes instead of
  4kib since the host is always allocating the complete transfer in one
  go.
- Finally the system crashed while walking through the sg list.

This patch adds three new flags in order to distinguish between DATA
URB completed and outstanding. If we receive status before data, we
cancel data and let data complete the command.
This solves the problem for IN and OUT transfers but does not work for
BIDI.
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
parent ee398b59
......@@ -58,6 +58,9 @@ enum {
SUBMIT_DATA_OUT_URB = (1 << 5),
ALLOC_CMD_URB = (1 << 6),
SUBMIT_CMD_URB = (1 << 7),
COMPLETED_DATA_IN = (1 << 8),
COMPLETED_DATA_OUT = (1 << 9),
DATA_COMPLETES_CMD = (1 << 10),
};
/* Overrides scsi_pointer */
......@@ -111,6 +114,7 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
{
struct sense_iu *sense_iu = urb->transfer_buffer;
struct scsi_device *sdev = cmnd->device;
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
if (urb->actual_length > 16) {
unsigned len = be16_to_cpup(&sense_iu->len);
......@@ -128,13 +132,15 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
}
cmnd->result = sense_iu->status;
cmnd->scsi_done(cmnd);
if (!(cmdinfo->state & DATA_COMPLETES_CMD))
cmnd->scsi_done(cmnd);
}
static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
{
struct sense_iu_old *sense_iu = urb->transfer_buffer;
struct scsi_device *sdev = cmnd->device;
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
if (urb->actual_length > 8) {
unsigned len = be16_to_cpup(&sense_iu->len) - 2;
......@@ -152,7 +158,8 @@ static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
}
cmnd->result = sense_iu->status;
cmnd->scsi_done(cmnd);
if (!(cmdinfo->state & DATA_COMPLETES_CMD))
cmnd->scsi_done(cmnd);
}
static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
......@@ -177,6 +184,7 @@ static void uas_stat_cmplt(struct urb *urb)
struct Scsi_Host *shost = urb->context;
struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
struct scsi_cmnd *cmnd;
struct uas_cmd_info *cmdinfo;
u16 tag;
int ret;
......@@ -202,12 +210,32 @@ static void uas_stat_cmplt(struct urb *urb)
dev_err(&urb->dev->dev, "failed submit status urb\n");
return;
}
cmdinfo = (void *)&cmnd->SCp;
switch (iu->iu_id) {
case IU_ID_STATUS:
if (devinfo->cmnd == cmnd)
devinfo->cmnd = NULL;
if (!(cmdinfo->state & COMPLETED_DATA_IN) &&
cmdinfo->data_in_urb) {
if (devinfo->use_streams) {
cmdinfo->state |= DATA_COMPLETES_CMD;
usb_unlink_urb(cmdinfo->data_in_urb);
} else {
usb_free_urb(cmdinfo->data_in_urb);
}
}
if (!(cmdinfo->state & COMPLETED_DATA_OUT) &&
cmdinfo->data_out_urb) {
if (devinfo->use_streams) {
cmdinfo->state |= DATA_COMPLETES_CMD;
usb_unlink_urb(cmdinfo->data_in_urb);
} else {
usb_free_urb(cmdinfo->data_out_urb);
}
}
if (urb->actual_length < 16)
devinfo->uas_sense_old = 1;
if (devinfo->uas_sense_old)
......@@ -236,27 +264,59 @@ static void uas_stat_cmplt(struct urb *urb)
dev_err(&urb->dev->dev, "failed submit status urb\n");
}
static void uas_data_cmplt(struct urb *urb)
static void uas_data_out_cmplt(struct urb *urb)
{
struct scsi_cmnd *cmnd = urb->context;
struct scsi_data_buffer *sdb = scsi_out(cmnd);
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
cmdinfo->state |= COMPLETED_DATA_OUT;
sdb->resid = sdb->length - urb->actual_length;
usb_free_urb(urb);
if (cmdinfo->state & DATA_COMPLETES_CMD)
cmnd->scsi_done(cmnd);
}
static void uas_data_in_cmplt(struct urb *urb)
{
struct scsi_data_buffer *sdb = urb->context;
struct scsi_cmnd *cmnd = urb->context;
struct scsi_data_buffer *sdb = scsi_in(cmnd);
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
cmdinfo->state |= COMPLETED_DATA_IN;
sdb->resid = sdb->length - urb->actual_length;
usb_free_urb(urb);
if (cmdinfo->state & DATA_COMPLETES_CMD)
cmnd->scsi_done(cmnd);
}
static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
unsigned int pipe, u16 stream_id,
struct scsi_data_buffer *sdb,
enum dma_data_direction dir)
unsigned int pipe, struct scsi_cmnd *cmnd,
enum dma_data_direction dir)
{
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
struct usb_device *udev = devinfo->udev;
struct urb *urb = usb_alloc_urb(0, gfp);
struct scsi_data_buffer *sdb;
usb_complete_t complete_fn;
u16 stream_id = cmdinfo->stream;
if (!urb)
goto out;
usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt,
sdb);
if (devinfo->use_streams)
urb->stream_id = stream_id;
if (dir == DMA_FROM_DEVICE) {
sdb = scsi_in(cmnd);
complete_fn = uas_data_in_cmplt;
} else {
sdb = scsi_out(cmnd);
complete_fn = uas_data_out_cmplt;
}
usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
complete_fn, cmnd);
urb->stream_id = stream_id;
urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
urb->sg = sdb->table.sgl;
out:
......@@ -358,8 +418,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
if (cmdinfo->state & ALLOC_DATA_IN_URB) {
cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
devinfo->data_in_pipe, cmdinfo->stream,
scsi_in(cmnd), DMA_FROM_DEVICE);
devinfo->data_in_pipe, cmnd,
DMA_FROM_DEVICE);
if (!cmdinfo->data_in_urb)
return SCSI_MLQUEUE_DEVICE_BUSY;
cmdinfo->state &= ~ALLOC_DATA_IN_URB;
......@@ -376,8 +436,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
devinfo->data_out_pipe, cmdinfo->stream,
scsi_out(cmnd), DMA_TO_DEVICE);
devinfo->data_out_pipe, cmnd,
DMA_TO_DEVICE);
if (!cmdinfo->data_out_urb)
return SCSI_MLQUEUE_DEVICE_BUSY;
cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment