Commit e4e88f31 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.
parents 9753dfe1 ef88e391
Message unit node:
For SRIO controllers that implement the message unit as part of the controller
this node is required. For devices with RMAN this node should NOT exist. The
node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
See srio.txt for more details about generic SRIO controller details.
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
The version X.Y should match the general SRIO controller's IP Block
revision register's Major(X) and Minor (Y) value.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address and
length of the SRIO configuration registers for message units
and doorbell units.
- fsl,liodn
Usage: optional-but-recommended (for devices with PAMU)
Value type: <prop-encoded-array>
Definition: The logical I/O device number for the PAMU (IOMMU) to be
correctly configured for SRIO accesses. The property should
not exist on devices that do not support PAMU.
The LIODN value is associated with all RMU transactions
(msg-unit, doorbell, port-write).
Sub-Nodes for RMU: The RMU node is composed of multiple sub-nodes that
correspond to the actual sub-controllers in the RMU. The manual for a given
SoC will detail which and how many of these sub-controllers are implemented.
Message Unit:
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
The version X.Y should match the general SRIO controller's IP Block
revision register's Major(X) and Minor (Y) value.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address and
length of the SRIO configuration registers for message units
and doorbell units.
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this device. The
value of the interrupts property consists of one interrupt
specifier. The format of the specifier is defined by the
binding document describing the node's interrupt parent.
A pair of IRQs are specified in this property. The first
element is associated with the transmit (TX) interrupt and the
second element is associated with the receive (RX) interrupt.
Doorbell Unit:
- compatible
Usage: required
Value type: <string>
Definition: Must include:
"fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
The version X.Y should match the general SRIO controller's IP Block
revision register's Major(X) and Minor (Y) value.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address and
length of the SRIO configuration registers for message units
and doorbell units.
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this device. The
value of the interrupts property consists of one interrupt
specifier. The format of the specifier is defined by the
binding document describing the node's interrupt parent.
A pair of IRQs are specified in this property. The first
element is associated with the transmit (TX) interrupt and the
second element is associated with the receive (RX) interrupt.
Port-Write Unit:
- compatible
Usage: required
Value type: <string>
Definition: Must include:
"fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
The version X.Y should match the general SRIO controller's IP Block
revision register's Major(X) and Minor (Y) value.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address and
length of the SRIO configuration registers for message units
and doorbell units.
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this device. The
value of the interrupts property consists of one interrupt
specifier. The format of the specifier is defined by the
binding document describing the node's interrupt parent.
A single IRQ that handles port-write conditions is
specified by this property. (Typically shared with error).
Note: All other standard properties (see the ePAPR) are allowed
but are optional.
Example:
rmu: rmu@d3000 {
compatible = "fsl,srio-rmu";
reg = <0xd3000 0x400>;
ranges = <0x0 0xd3000 0x400>;
fsl,liodn = <0xc8>;
message-unit@0 {
compatible = "fsl,srio-msg-unit";
reg = <0x0 0x100>;
interrupts = <
60 2 0 0 /* msg1_tx_irq */
61 2 0 0>;/* msg1_rx_irq */
};
message-unit@100 {
compatible = "fsl,srio-msg-unit";
reg = <0x100 0x100>;
interrupts = <
62 2 0 0 /* msg2_tx_irq */
63 2 0 0>;/* msg2_rx_irq */
};
doorbell-unit@400 {
compatible = "fsl,srio-dbell-unit";
reg = <0x400 0x80>;
interrupts = <
56 2 0 0 /* bell_outb_irq */
57 2 0 0>;/* bell_inb_irq */
};
port-write-unit@4e0 {
compatible = "fsl,srio-port-write-unit";
reg = <0x4e0 0x20>;
interrupts = <16 2 1 11>;
};
};
* Freescale Serial RapidIO (SRIO) Controller
RapidIO port node:
Properties:
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,srio" for IP blocks with IP Block
Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
version in IP Block Revision Register and Y is Minor version. If this
compatiable is provided it should be ordered before "fsl,srio".
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address and
length of the SRIO configuration registers. The size should
be set to 0x11000.
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this device. The
value of the interrupts property consists of one interrupt
specifier. The format of the specifier is defined by the
binding document describing the node's interrupt parent.
A single IRQ that handles error conditions is specified by this
property. (Typically shared with port-write).
- fsl,srio-rmu-handle:
Usage: required if rmu node is defined
Value type: <phandle>
Definition: A single <phandle> value that points to the RMU.
(See srio-rmu.txt for more details on RMU node binding)
Port Child Nodes: There should a port child node for each port that exists in
the controller. The ports are numbered starting at one (1) and should have
the following properties:
- cell-index
Usage: required
Value type: <u32>
Definition: A standard property. Matches the port id.
- ranges
Usage: required if local access windows preset
Value type: <prop-encoded-array>
Definition: A standard property. Utilized to describe the memory mapped
IO space utilized by the controller. This corresponds to the
setting of the local access windows that are targeted to this
SRIO port.
- fsl,liodn
Usage: optional-but-recommended (for devices with PAMU)
Value type: <prop-encoded-array>
Definition: The logical I/O device number for the PAMU (IOMMU) to be
correctly configured for SRIO accesses. The property should
not exist on devices that do not support PAMU.
For HW (ie, the P4080) that only supports a LIODN for both
memory and maintenance transactions then a single LIODN is
represented in the property for both transactions.
For HW (ie, the P304x/P5020, etc) that supports an LIODN for
memory transactions and a unique LIODN for maintenance
transactions then a pair of LIODNs are represented in the
property. Within the pair, the first element represents the
LIODN associated with memory transactions and the second element
represents the LIODN associated with maintenance transactions
for the port.
Note: All other standard properties (see ePAPR) are allowed but are optional.
Example:
rapidio: rapidio@ffe0c0000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0xf 0xfe0c0000 0 0x11000>;
compatible = "fsl,srio";
interrupts = <16 2 1 11>; /* err_irq */
fsl,srio-rmu-handle = <&rmu>;
ranges;
port1 {
cell-index = <1>;
#address-cells = <2>;
#size-cells = <2>;
fsl,liodn = <34>;
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
cell-index = <2>;
#address-cells = <2>;
#size-cells = <2>;
fsl,liodn = <48>;
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
...@@ -4011,7 +4011,7 @@ M: Josh Boyer <jwboyer@gmail.com> ...@@ -4011,7 +4011,7 @@ M: Josh Boyer <jwboyer@gmail.com>
M: Matt Porter <mporter@kernel.crashing.org> M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/ W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git T: git git://git.infradead.org/users/jwboyer/powerpc-4xx.git
S: Maintained S: Maintained
F: arch/powerpc/platforms/40x/ F: arch/powerpc/platforms/40x/
F: arch/powerpc/platforms/44x/ F: arch/powerpc/platforms/44x/
......
...@@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64 ...@@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64
bool bool
default y if 64BIT default y if 64BIT
config ARCH_HAS_CPU_IDLE_WAIT
bool
default y
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
...@@ -133,6 +137,7 @@ config PPC ...@@ -133,6 +137,7 @@ config PPC
select IRQ_PER_CPU select IRQ_PER_CPU
select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL select GENERIC_IRQ_SHOW_LEVEL
select IRQ_FORCED_THREADING
select HAVE_RCU_TABLE_FREE if SMP select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS select HAVE_SYSCALL_TRACEPOINTS
select HAVE_BPF_JIT if (PPC64 && NET) select HAVE_BPF_JIT if (PPC64 && NET)
...@@ -363,8 +368,9 @@ config KEXEC ...@@ -363,8 +368,9 @@ config KEXEC
config CRASH_DUMP config CRASH_DUMP
bool "Build a kdump crash kernel" bool "Build a kdump crash kernel"
depends on PPC64 || 6xx || FSL_BOOKE depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
select RELOCATABLE if PPC64 || FSL_BOOKE select RELOCATABLE if PPC64 || 44x
select DYNAMIC_MEMSTART if FSL_BOOKE
help help
Build a kernel suitable for use as a kdump capture kernel. Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump The same kernel binary can be used as production kernel and dump
...@@ -685,6 +691,10 @@ config FSL_LBC ...@@ -685,6 +691,10 @@ config FSL_LBC
controller. Also contains some common code used by controller. Also contains some common code used by
drivers for specific local bus peripherals. drivers for specific local bus peripherals.
config FSL_IFC
bool
depends on FSL_SOC
config FSL_GTM config FSL_GTM
bool bool
depends on PPC_83xx || QUICC_ENGINE || CPM2 depends on PPC_83xx || QUICC_ENGINE || CPM2
...@@ -770,6 +780,10 @@ source "drivers/rapidio/Kconfig" ...@@ -770,6 +780,10 @@ source "drivers/rapidio/Kconfig"
endmenu endmenu
config NONSTATIC_KERNEL
bool
default n
menu "Advanced setup" menu "Advanced setup"
depends on PPC32 depends on PPC32
...@@ -819,13 +833,32 @@ config LOWMEM_CAM_NUM ...@@ -819,13 +833,32 @@ config LOWMEM_CAM_NUM
int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
default 3 default 3
config DYNAMIC_MEMSTART
bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
select NONSTATIC_KERNEL
help
This option enables the kernel to be loaded at any page aligned
physical address. The kernel creates a mapping from KERNELBASE to
the address where the kernel is loaded. The page size here implies
the TLB page size of the mapping for kernel on the particular platform.
Please refer to the init code for finding the TLB page size.
DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
kernel image, where the only restriction is the page aligned kernel
load address. When this option is enabled, the compile time physical
address CONFIG_PHYSICAL_START is ignored.
This option is overridden by CONFIG_RELOCATABLE
config RELOCATABLE config RELOCATABLE
bool "Build a relocatable kernel (EXPERIMENTAL)" bool "Build a relocatable kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x) depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
select NONSTATIC_KERNEL
help help
This builds a kernel image that is capable of running at the This builds a kernel image that is capable of running at the
location the kernel is loaded at (some alignment restrictions may location the kernel is loaded at, without any alignment restrictions.
exist). This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
One use is for the kexec on panic case where the recovery kernel One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary must live at a different physical address than the primary
...@@ -835,7 +868,11 @@ config RELOCATABLE ...@@ -835,7 +868,11 @@ config RELOCATABLE
it has been loaded at and the compile time physical addresses it has been loaded at and the compile time physical addresses
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
setting can still be useful to bootwrappers that need to know the setting can still be useful to bootwrappers that need to know the
load location of the kernel (eg. u-boot/mkimage). load address of the kernel (eg. u-boot/mkimage).
config RELOCATABLE_PPC32
def_bool y
depends on PPC32 && RELOCATABLE
config PAGE_OFFSET_BOOL config PAGE_OFFSET_BOOL
bool "Set custom page offset address" bool "Set custom page offset address"
...@@ -865,7 +902,7 @@ config KERNEL_START_BOOL ...@@ -865,7 +902,7 @@ config KERNEL_START_BOOL
config KERNEL_START config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL hex "Virtual address of kernel base" if KERNEL_START_BOOL
default PAGE_OFFSET if PAGE_OFFSET_BOOL default PAGE_OFFSET if PAGE_OFFSET_BOOL
default "0xc2000000" if CRASH_DUMP && !RELOCATABLE default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
default "0xc0000000" default "0xc0000000"
config PHYSICAL_START_BOOL config PHYSICAL_START_BOOL
...@@ -878,7 +915,7 @@ config PHYSICAL_START_BOOL ...@@ -878,7 +915,7 @@ config PHYSICAL_START_BOOL
config PHYSICAL_START config PHYSICAL_START
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
default "0x00000000" default "0x00000000"
config PHYSICAL_ALIGN config PHYSICAL_ALIGN
...@@ -924,6 +961,7 @@ endmenu ...@@ -924,6 +961,7 @@ endmenu
if PPC64 if PPC64
config RELOCATABLE config RELOCATABLE
bool "Build a relocatable kernel" bool "Build a relocatable kernel"
select NONSTATIC_KERNEL
help help
This builds a kernel image that is capable of running anywhere This builds a kernel image that is capable of running anywhere
in the RMA (real memory area) at any 16k-aligned base address. in the RMA (real memory area) at any 16k-aligned base address.
......
...@@ -336,4 +336,16 @@ config PPC_EARLY_DEBUG_CPM_ADDR ...@@ -336,4 +336,16 @@ config PPC_EARLY_DEBUG_CPM_ADDR
platform probing is done, all platforms selected must platform probing is done, all platforms selected must
share the same address. share the same address.
config STRICT_DEVMEM
def_bool y
prompt "Filter access to /dev/mem"
help
This option restricts access to /dev/mem. If this option is
disabled, you allow userspace access to all memory, including
kernel and userspace memory. Accidental memory access is likely
to be disastrous.
Memory access is required for experts who want to debug the kernel.
If you are unsure, say Y.
endmenu endmenu
...@@ -63,9 +63,9 @@ override CC += -m$(CONFIG_WORD_SIZE) ...@@ -63,9 +63,9 @@ override CC += -m$(CONFIG_WORD_SIZE)
override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR) override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
endif endif
LDFLAGS_vmlinux-yy := -Bstatic LDFLAGS_vmlinux-y := -Bstatic
LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy) LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
...@@ -131,8 +131,7 @@ KBUILD_CFLAGS += -mno-sched-epilog ...@@ -131,8 +131,7 @@ KBUILD_CFLAGS += -mno-sched-epilog
endif endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_E200) += -Wa,-me200 cpu-as-$(CONFIG_E200) += -Wa,-me200
...@@ -166,7 +165,7 @@ all: zImage ...@@ -166,7 +165,7 @@ all: zImage
# With make 3.82 we cannot mix normal and wildcard targets # With make 3.82 we cannot mix normal and wildcard targets
BOOT_TARGETS1 := zImage zImage.initrd uImage BOOT_TARGETS1 := zImage zImage.initrd uImage
BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2) PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
......
...@@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 ...@@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
...@@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c ...@@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
treeboot-currituck.c
src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot)) src-boot := $(addprefix $(obj)/, $(src-boot))
...@@ -199,6 +201,7 @@ image-$(CONFIG_EP405) += dtbImage.ep405 ...@@ -199,6 +201,7 @@ image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia image-$(CONFIG_ACADIA) += cuImage.acadia
image-$(CONFIG_OBS600) += uImage.obs600
# Board ports in arch/powerpc/platform/44x/Kconfig # Board ports in arch/powerpc/platform/44x/Kconfig
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
...@@ -212,6 +215,7 @@ image-$(CONFIG_WARP) += cuImage.warp ...@@ -212,6 +215,7 @@ image-$(CONFIG_WARP) += cuImage.warp
image-$(CONFIG_YOSEMITE) += cuImage.yosemite image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic treeImage.iss4xx-mpic
image-$(CONFIG_CURRITUCK) += treeImage.currituck
# Board ports in arch/powerpc/platform/8xx/Kconfig # Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
...@@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux ...@@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits) $(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot) $(call if_changed,wrap,uboot)
$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
......
...@@ -9,6 +9,12 @@ ...@@ -9,6 +9,12 @@
}) })
#define mtdcr(rn, val) \ #define mtdcr(rn, val) \
asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val)) asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
#define mfdcrx(rn) \
({ \
unsigned long rval; \
asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
rval; \
})
/* 440GP/440GX SDRAM controller DCRs */ /* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010 #define DCRN_SDRAM0_CFGADDR 0x010
......
...@@ -57,3 +57,55 @@ __div64_32: ...@@ -57,3 +57,55 @@ __div64_32:
stw r8,4(r3) stw r8,4(r3)
mr r3,r6 # return the remainder in r3 mr r3,r6 # return the remainder in r3
blr blr
/*
* Extended precision shifts.
*
* Updated to be valid for shift counts from 0 to 63 inclusive.
* -- Gabriel
*
* R3/R4 has 64 bit value
* R5 has shift count
* result in R3/R4
*
* ashrdi3: arithmetic right shift (sign propagation)
* lshrdi3: logical right shift
* ashldi3: left shift
*/
.globl __ashrdi3
__ashrdi3:
subfic r6,r5,32
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
addi r7,r5,32 # could be xori, or addi with -32
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
sraw r7,r3,r7 # t2 = MSW >> (count-32)
or r4,r4,r6 # LSW |= t1
slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
sraw r3,r3,r5 # MSW = MSW >> count
or r4,r4,r7 # LSW |= t2
blr
.globl __ashldi3
__ashldi3:
subfic r6,r5,32
slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
addi r7,r5,32 # could be xori, or addi with -32
srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
or r3,r3,r6 # MSW |= t1
slw r4,r4,r5 # LSW = LSW << count
or r3,r3,r7 # MSW |= t2
blr
.globl __lshrdi3
__lshrdi3:
subfic r6,r5,32
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
addi r7,r5,32 # could be xori, or addi with -32
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
or r4,r4,r6 # LSW |= t1
srw r3,r3,r5 # MSW = MSW >> count
or r4,r4,r7 # LSW |= t2
blr
...@@ -256,7 +256,7 @@ tbi1: tbi-phy@11 { ...@@ -256,7 +256,7 @@ tbi1: tbi-phy@11 {
serial0: serial@4500 { serial0: serial@4500 {
cell-index = <0>; cell-index = <0>;
device_type = "serial"; device_type = "serial";
compatible = "ns16550"; compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; reg = <0x4500 0x100>;
clock-frequency = <400000000>; clock-frequency = <400000000>;
interrupts = <9 0x8>; interrupts = <9 0x8>;
...@@ -266,7 +266,7 @@ serial0: serial@4500 { ...@@ -266,7 +266,7 @@ serial0: serial@4500 {
serial1: serial@4600 { serial1: serial@4600 {
cell-index = <1>; cell-index = <1>;
device_type = "serial"; device_type = "serial";
compatible = "ns16550"; compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; reg = <0x4600 0x100>;
clock-frequency = <400000000>; clock-frequency = <400000000>;
interrupts = <10 0x8>; interrupts = <10 0x8>;
......
/*
* Device Tree Source for IBM Embedded PPC 476 Platform
*
* Copyright © 2011 Tony Breeds IBM Corporation
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/memreserve/ 0x01f00000 0x00100000; // spin table
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "ibm,currituck";
compatible = "ibm,currituck";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
serial0 = &UART0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,476";
reg = <0>;
clock-frequency = <1600000000>; // 1.6 GHz
timebase-frequency = <100000000>; // 100Mhz
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "ok";
};
cpu@1 {
device_type = "cpu";
model = "PowerPC,476";
reg = <1>;
clock-frequency = <1600000000>; // 1.6 GHz
timebase-frequency = <100000000>; // 100Mhz
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0x0 0x01f00000>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
};
MPIC: interrupt-controller {
compatible = "chrp,open-pic";
interrupt-controller;
dcr-reg = <0xffc00000 0x00040000>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
plb {
compatible = "ibm,plb6";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clock-frequency = <200000000>; // 200Mhz
POB0: opb {
compatible = "ibm,opb-4xx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full
* 32-bit range
*/
ranges = <0x00000000 0x00000200 0x00000000 0x80000000
0x80000000 0x00000200 0x80000000 0x80000000>;
clock-frequency = <100000000>;
UART0: serial@10000000 {
device_type = "serial";
compatible = "ns16750", "ns16550";
reg = <0x10000000 0x00000008>;
virtual-reg = <0xe1000000>;
clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
current-speed = <115200>;
interrupt-parent = <&MPIC>;
interrupts = <34 2>;
};
IIC0: i2c@00000000 {
compatible = "ibm,iic-currituck", "ibm,iic";
reg = <0x0 0x00000014>;
interrupt-parent = <&MPIC>;
interrupts = <79 2>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "stm,m41t80", "m41st85";
reg = <0x68>;
};
};
};
PCIE0: pciex@10100000000 { // 4xGBIF1
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
dcr-reg = <0x80 0x20>;
// pci_space < pci_addr > < cpu_addr > < size >
ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
/* Inbound starting at 0 to memsize filled in by zImage */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
};
PCIE1: pciex@30100000000 { // 4xGBIF0
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
dcr-reg = <0x60 0x20>;
ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
/* Inbound starting at 0 to memsize filled in by zImage */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
};
PCIE2: pciex@38100000000 { // 2xGBIF0
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
primary;
port = <0x2>; /* port number */
reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
dcr-reg = <0xA0 0x20>;
ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
/* Inbound starting at 0 to memsize filled in by zImage */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
};
};
chosen {
linux,stdout-path = &UART0;
};
};
/*
* MPC8536 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <24 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <25 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
/* controller at 0xb000 */
&pci3 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <27 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <27 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8536-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8536-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8536-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-gpio-0.dtsi"
/* mark compat w/8572 to get some erratum treatment */
gpio-controller@f000 {
compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
};
sata@18000 {
compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
cell-index = <1>;
interrupts = <74 0x2 0 0>;
};
sata@19000 {
compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
cell-index = <2>;
interrupts = <41 0x2 0 0>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8536-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
usb@22000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <28 0x2 0 0>;
};
usb@23000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <46 0x2 0 0>;
};
ptp_clock@24e00 {
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
};
/include/ "pq3-etsec1-2.dtsi"
ethernet@26000 {
cell-index = <1>;
};
usb@2b000 {
compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
reg = <0x2b000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <60 0x2 0 0>;
};
/include/ "pq3-esdhc-0.dtsi"
/include/ "pq3-sec3.0-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8536-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* MPC8536 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8536";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
pci3 = &pci3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8536@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
};
/*
* MPC8544 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <24 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <25 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
/* controller at 0xb000 */
&pci3 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <27 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <27 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8544-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8544-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8544-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8544-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-2.dtsi"
ethernet@26000 {
cell-index = <1>;
};
/include/ "pq3-sec2.1-0.dtsi"
/include/ "pq3-mpic.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8544-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* MPC8544 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8544";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
pci3 = &pci3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8544@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
};
/*
* MPC8548 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <24 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <25 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
};
/* controller at 0xa000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8548-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8548-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8548-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-1.dtsi"
/include/ "pq3-etsec1-2.dtsi"
/include/ "pq3-etsec1-3.dtsi"
/include/ "pq3-sec2.1-0.dtsi"
/include/ "pq3-mpic.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* MPC8548 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8548";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8548@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
};
/*
* MPC8568 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
interrupts = <19 2 0 0>;
sleep = <&pmc 0x08000000>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <24 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
sleep = <&pmc 0x80000000>;
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
sleep = <&pmc 0x20000000>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&rio {
compatible = "fsl,srio";
interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
sleep = <&pmc 0x00080000>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8568-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8568-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8568-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
i2c-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000004>;
ranges;
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
};
duart-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000002>;
ranges;
/include/ "pq3-duart-0.dtsi"
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8568-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
dma@21300 {
sleep = <&pmc 0x00000400>;
};
/include/ "pq3-etsec1-0.dtsi"
ethernet@24000 {
sleep = <&pmc 0x00000080>;
};
/include/ "pq3-etsec1-1.dtsi"
ethernet@25000 {
sleep = <&pmc 0x00000040>;
};
par_io@e0100 {
reg = <0xe0100 0x100>;
device_type = "par_io";
};
/include/ "pq3-sec2.1-0.dtsi"
crypto@30000 {
sleep = <&pmc 0x01000000>;
};
/include/ "pq3-mpic.dtsi"
/include/ "pq3-rmu-0.dtsi"
rmu@d3000 {
sleep = <&pmc 0x00040000>;
};
global-utilities@e0000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
pmc: power@70 {
compatible = "fsl,mpc8568-pmc",
"fsl,mpc8548-pmc";
reg = <0x70 0x20>;
};
};
};
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-riscs = <2>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
interrupt-parent = <&mpic>;
};
spi@4c0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
cell-index = <0>;
interrupts = <2>;
interrupt-parent = <&qeic>;
};
spi@500 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
ucc@3000 {
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x10000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x10000>;
};
};
};
/*
* MPC8568 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8568";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8568@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
sleep = <&pmc 0x00008000 // core
&pmc 0x00004000>; // timebase
};
};
};
/*
* MPC8569 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
sleep = <&pmc 0x08000000>;
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
sleep = <&pmc 0x20000000>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&rio {
compatible = "fsl,srio";
interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
sleep = <&pmc 0x00080000>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8569-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8569-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8569-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
i2c-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000004>;
ranges;
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
};
duart-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000002>;
ranges;
/include/ "pq3-duart-0.dtsi"
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8569-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
sleep = <&pmc 0x00200000>;
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x100>;
ranges = <0x0 0xe0100 0x100>;
device_type = "par_io";
};
/include/ "pq3-sec3.1-0.dtsi"
crypto@30000 {
sleep = <&pmc 0x01000000>;
};
/include/ "pq3-mpic.dtsi"
/include/ "pq3-rmu-0.dtsi"
rmu@d3000 {
sleep = <&pmc 0x00040000>;
};
global-utilities@e0000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
pmc: power@70 {
compatible = "fsl,mpc8569-pmc",
"fsl,mpc8548-pmc";
reg = <0x70 0x20>;
};
};
};
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <0>;
fsl,qe-num-riscs = <4>;
fsl,qe-num-snums = <46>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
interrupt-parent = <&mpic>;
};
timer@440 {
compatible = "fsl,mpc8569-qe-gtm",
"fsl,qe-gtm", "fsl,gtm";
reg = <0x440 0x40>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
spi@4c0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
reg = <0x4c0 0x40>;
cell-index = <0>;
interrupts = <2>;
interrupt-parent = <&qeic>;
};
spi@500 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
};
usb@6c0 {
compatible = "fsl,mpc8569-qe-usb",
"fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
ucc@2200 {
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
};
ucc@3000 {
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
};
ucc@3200 {
cell-index = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
};
ucc@3400 {
cell-index = <6>;
reg = <0x3400 0x200>;
interrupts = <41>;
interrupt-parent = <&qeic>;
};
ucc@3600 {
cell-index = <8>;
reg = <0x3600 0x200>;
interrupts = <43>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x20000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x20000>;
};
};
};
/*
* MPC8569 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8569";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8569@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
sleep = <&pmc 0x00008000 // core
&pmc 0x00004000>; // timebase
};
};
};
/*
* MPC8572 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <24 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <24 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <25 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8572-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x6000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-dma-1.dtsi"
/include/ "pq3-gpio-0.dtsi"
gpio-controller@f000 {
compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x100000>; // L2,1M
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
ptp_clock@24e00 {
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
};
/include/ "pq3-etsec1-1.dtsi"
/include/ "pq3-etsec1-2.dtsi"
/include/ "pq3-etsec1-3.dtsi"
/include/ "pq3-sec3.0-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* MPC8572 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8572";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
/*
* P1010/P1014 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&ifc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,ifc", "simple-bus";
interrupts = <16 2 0 0 19 2 0 0>;
};
/* controller at 0x9000 */
&pci0 {
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1010-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1010-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1010-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi0: spi@7000 {
fsl,espi-num-chipselects = <1>;
};
/include/ "pq3-gpio-0.dtsi"
/include/ "pq3-sata2-0.dtsi"
/include/ "pq3-sata2-1.dtsi"
can0: can@1c000 {
compatible = "fsl,p1010-flexcan";
reg = <0x1c000 0x1000>;
interrupts = <48 0x2 0 0>;
};
can1: can@1d000 {
compatible = "fsl,p1010-flexcan";
reg = <0x1d000 0x1000>;
interrupts = <61 0x2 0 0>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,p1010-l2-cache-controller",
"fsl,p1014-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
fsl,sdhci-auto-cmd12;
};
/include/ "pq3-sec4.4-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: ethernet@b0000 {
queue-group@b0000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
};
};
/include/ "pq3-etsec2-1.dtsi"
enet1: ethernet@b1000 {
queue-group@b1000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
};
};
/include/ "pq3-etsec2-2.dtsi"
enet2: ethernet@b2000 {
queue-group@b2000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
};
};
global-utilities@e0000 {
compatible = "fsl,p1010-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* P1010/P1014 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P1010";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
can0 = &can0;
can1 = &can1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1010@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
};
/*
* P1020/P1011 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x9000 */
&pci0 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1020-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1020-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-gpio-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p1020-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
/include/ "pq3-usb2-dr-1.dtsi"
/include/ "pq3-esdhc-0.dtsi"
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
};
/include/ "pq3-etsec2-2.dtsi"
enet2: enet2_grp2: ethernet@b2000 {
};
global-utilities@e0000 {
compatible = "fsl,p1020-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/include/ "pq3-etsec2-grp2-0.dtsi"
/include/ "pq3-etsec2-grp2-1.dtsi"
/include/ "pq3-etsec2-grp2-2.dtsi"
/*
* P1020/P1011 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P1020";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1020@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1020@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
/*
* P1021/P1012 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x9000 */
&pci0 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1021-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1021-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1021-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-gpio-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p1021-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
/include/ "pq3-esdhc-0.dtsi"
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
};
/include/ "pq3-etsec2-2.dtsi"
enet2: enet2_grp2: ethernet@b2000 {
};
global-utilities@e0000 {
compatible = "fsl,p1021-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
};
ucc@2400 {
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
/include/ "pq3-etsec2-grp2-0.dtsi"
/include/ "pq3-etsec2-grp2-1.dtsi"
/include/ "pq3-etsec2-grp2-2.dtsi"
/*
* P1021/P1012 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P1021";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1021@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1021@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
/*
* P1022/P1013 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x9000 */
&pci0 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
/* controller at 0xb000 */
&pci2 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1022-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1022-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1022-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-dma-1.dtsi"
dma@c300 {
dma00: dma-channel@0 {
compatible = "fsl,ssi-dma-channel";
};
dma01: dma-channel@80 {
compatible = "fsl,ssi-dma-channel";
};
};
/include/ "pq3-gpio-0.dtsi"
display@10000 {
compatible = "fsl,diu", "fsl,p1022-diu";
reg = <0x10000 1000>;
interrupts = <64 2 0 0>;
};
ssi@15000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <0x15000 0x100>;
interrupts = <75 2 0 0>;
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
fsl,fifo-depth = <15>;
};
/include/ "pq3-sata2-0.dtsi"
/include/ "pq3-sata2-1.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p1022-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
/include/ "pq3-usb2-dr-1.dtsi"
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
fsl,sdhci-auto-cmd12;
};
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
};
global-utilities@e0000 {
compatible = "fsl,p1022-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
power@e0070{
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
reg = <0xe0070 0x20>;
};
};
/include/ "pq3-etsec2-grp2-0.dtsi"
/include/ "pq3-etsec2-grp2-1.dtsi"
/*
* P1022/P1013 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P1022";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1022@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1022@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
/*
* P1023/P1017 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0xa000 */
&pci0 {
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
};
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
};
};
/* controller at 0xb000 */
&pci2 {
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1023-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1023-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1023-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-gpio-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p1023-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
crypto: crypto@300000 {
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30000 0x10000>;
ranges = <0 0x30000 0x10000>;
interrupts = <58 2 0 0>;
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <57 2 0 0>;
};
sec_jr3: jr@4000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <57 2 0 0>;
};
rtic@6000 {
compatible = "fsl,sec-v4.2-rtic",
"fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x80>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x80>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x80>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x500 0x80>;
};
};
};
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
global-utilities@e0000 {
compatible = "fsl,p1023-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* P1023/P1017 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P1023";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
crypto = &crypto;
sec_jr0 = &sec_jr0;
sec_jr1 = &sec_jr1;
sec_jr2 = &sec_jr2;
sec_jr3 = &sec_jr3;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1023@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1023@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
/*
* P2020/P2010 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0xa000 */
&pci0 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <25 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0x8000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <24 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <24 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p2020-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p2020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p2020-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi0: spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-dma-1.dtsi"
/include/ "pq3-gpio-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p2020-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2,512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
ptp_clock@24e00 {
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
};
/include/ "pq3-etsec1-1.dtsi"
/include/ "pq3-etsec1-2.dtsi"
/include/ "pq3-esdhc-0.dtsi"
/include/ "pq3-sec3.1-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
global-utilities@e0000 {
compatible = "fsl,p2020-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
/*
* P2020/P2010 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P2020";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P2020@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P2020@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
/*
* P2041/P2040 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
#address-cells = <2>;
#size-cells = <1>;
};
/* controller at 0x200000 */
&pci0 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 15>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
/* controller at 0x201000 */
&pci1 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 14>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
/* controller at 0x202000 */
&pci2 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 13>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 42 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 1 0 0
>;
};
};
&rio {
compatible = "fsl,srio";
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
};
};
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,dcsr-npc";
reg = <0x1000 0x1000 0x1000000 0x8000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0xB0000 0x1000>;
};
dcsr-dpaa@9000 {
compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
reg = <0x9000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr1>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-cpu-sb-proxy@40000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x40000 0x1000>;
};
dcsr-cpu-sb-proxy@41000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x41000 0x1000>;
};
dcsr-cpu-sb-proxy@42000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu2>;
reg = <0x42000 0x1000>;
};
dcsr-cpu-sb-proxy@43000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu3>;
reg = <0x43000 0x1000>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <32>;
};
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
reg = <0x10000 0x1000>;
interrupts = <16 2 1 27>;
};
corenet-cf@18000 {
compatible = "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
fsl,ccf-num-snoopids = <32>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
interrupts = <
24 2 0 0
16 2 1 30>;
};
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <1>;
fsl,liodn-bits = <12>;
};
pins: global-utilities@e0e00 {
compatible = "fsl,qoriq-pin-control-1.0";
reg = <0xe0e00 0x200>;
#sleep-cells = <2>;
};
clockgen: global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
};
rcpm: global-utilities@e2000 {
compatible = "fsl,qoriq-rcpm-1.0";
reg = <0xe2000 0x1000>;
#sleep-cells = <1>;
};
sfp: sfp@e8000 {
compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,p2041-serdes";
reg = <0xea000 0x1000>;
};
/include/ "qoriq-dma-0.dtsi"
/include/ "qoriq-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
sdhci,auto-cmd12;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
dr_mode = "host";
phy_type = "utmi";
};
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec4.2-0.dtsi"
};
/*
* P2041 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P2041";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ccsr = &soc;
dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
msi0 = &msi0;
msi1 = &msi1;
msi2 = &msi2;
crypto = &crypto;
sec_jr0 = &sec_jr0;
sec_jr1 = &sec_jr1;
sec_jr2 = &sec_jr2;
sec_jr3 = &sec_jr3;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
};
};
};
/*
* P3041 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
#address-cells = <2>;
#size-cells = <1>;
};
/* controller at 0x200000 */
&pci0 {
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 15>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
/* controller at 0x201000 */
&pci1 {
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 14>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
/* controller at 0x202000 */
&pci2 {
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 13>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 42 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 1 0 0
>;
};
};
/* controller at 0x203000 */
&pci3 {
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 12>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 12>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 43 1 0 0
0000 0 0 2 &mpic 0 1 0 0
0000 0 0 3 &mpic 4 1 0 0
0000 0 0 4 &mpic 8 1 0 0
>;
};
};
&rio {
compatible = "fsl,srio";
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
};
};
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,dcsr-npc";
reg = <0x1000 0x1000 0x1000000 0x8000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0xB0000 0x1000>;
};
dcsr-dpaa@9000 {
compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
reg = <0x9000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr1>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-cpu-sb-proxy@40000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x40000 0x1000>;
};
dcsr-cpu-sb-proxy@41000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x41000 0x1000>;
};
dcsr-cpu-sb-proxy@42000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu2>;
reg = <0x42000 0x1000>;
};
dcsr-cpu-sb-proxy@43000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu3>;
reg = <0x43000 0x1000>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <32>;
};
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
reg = <0x10000 0x1000>;
interrupts = <16 2 1 27>;
};
corenet-cf@18000 {
compatible = "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
fsl,ccf-num-snoopids = <32>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
interrupts = <
24 2 0 0
16 2 1 30>;
};
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <1>;
fsl,liodn-bits = <12>;
};
pins: global-utilities@e0e00 {
compatible = "fsl,qoriq-pin-control-1.0";
reg = <0xe0e00 0x200>;
#sleep-cells = <2>;
};
clockgen: global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
};
rcpm: global-utilities@e2000 {
compatible = "fsl,qoriq-rcpm-1.0";
reg = <0xe2000 0x1000>;
#sleep-cells = <1>;
};
sfp: sfp@e8000 {
compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,p3041-serdes";
reg = <0xea000 0x1000>;
};
/include/ "qoriq-dma-0.dtsi"
/include/ "qoriq-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
sdhci,auto-cmd12;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
dr_mode = "host";
phy_type = "utmi";
};
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec4.2-0.dtsi"
};
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -80,7 +80,7 @@ i2c@3000 { ...@@ -80,7 +80,7 @@ i2c@3000 {
serial0: serial@4500 { serial0: serial@4500 {
cell-index = <0>; cell-index = <0>;
device_type = "serial"; device_type = "serial";
compatible = "ns16550"; compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; reg = <0x4500 0x100>;
clock-frequency = <264000000>; clock-frequency = <264000000>;
interrupts = <9 0x8>; interrupts = <9 0x8>;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment