Skip to content

L
linux
Commit e5664293 authored by Michael Hennerich's avatar Michael Hennerich Committed by Greg Kroah-Hartman
Browse files
Options

staging:iio:adc:ad7152: increase readability by introducing proper bit defines 

Some other miscellaneous cleanup.
Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent ea993a51
Hide whitespace changes
Inline Side-by-side
Showing with 83 additions and 50 deletions
drivers/staging/iio/adc/ad7152.c
View file @ e5664293
/*
* AD7152 capacitive sensor driver supporting AD7152/3
*
* Copyright 2010 Analog Devices Inc.
* Copyright 2010-2011a Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -25,24 +25,55 @@
* AD7152 registers definition
*/
#define AD7152_STATUS 0
#define AD7152_STATUS_RDY1 (1 << 0)
#define AD7152_STATUS_RDY2 (1 << 1)
#define AD7152_CH1_DATA_HIGH 1
#define AD7152_CH2_DATA_HIGH 3
#define AD7152_CH1_OFFS_HIGH 5
#define AD7152_CH2_OFFS_HIGH 7
#define AD7152_CH1_GAIN_HIGH 9
#define AD7152_CH1_SETUP 11
#define AD7152_CH2_GAIN_HIGH 12
#define AD7152_CH2_SETUP 14
#define AD7152_CFG 15
#define AD7152_RESEVERD 16
#define AD7152_CAPDAC_POS 17
#define AD7152_CAPDAC_NEG 18
#define AD7152_CFG2 26
#define AD7152_MAX_CONV_MODE 6
#define AD7152_REG_STATUS 0
#define AD7152_REG_CH1_DATA_HIGH 1
#define AD7152_REG_CH2_DATA_HIGH 3
#define AD7152_REG_CH1_OFFS_HIGH 5
#define AD7152_REG_CH2_OFFS_HIGH 7
#define AD7152_REG_CH1_GAIN_HIGH 9
#define AD7152_REG_CH1_SETUP 11
#define AD7152_REG_CH2_GAIN_HIGH 12
#define AD7152_REG_CH2_SETUP 14
#define AD7152_REG_CFG 15
#define AD7152_REG_RESEVERD 16
#define AD7152_REG_CAPDAC_POS 17
#define AD7152_REG_CAPDAC_NEG 18
#define AD7152_REG_CFG2 26
/* Status Register Bit Designations (AD7152_REG_STATUS) */
#define AD7152_STATUS_RDY1 (1 << 0)
#define AD7152_STATUS_RDY2 (1 << 1)
#define AD7152_STATUS_C1C2 (1 << 2)
#define AD7152_STATUS_PWDN (1 << 7)
/* Setup Register Bit Designations (AD7152_REG_CHx_SETUP) */
#define AD7152_SETUP_CAPDIFF (1 << 5)
#define AD7152_SETUP_RANGE_2pF (0 << 6)
#define AD7152_SETUP_RANGE_0_5pF (1 << 6)
#define AD7152_SETUP_RANGE_1pF (2 << 6)
#define AD7152_SETUP_RANGE_4pF (3 << 6)
/* Config Register Bit Designations (AD7152_REG_CFG) */
#define AD7152_CONF_CH2EN (1 << 3)
#define AD7152_CONF_CH1EN (1 << 4)
#define AD7152_CONF_MODE_IDLE (0 << 0)
#define AD7152_CONF_MODE_CONT_CONV (1 << 0)
#define AD7152_CONF_MODE_SINGLE_CONV (2 << 0)
#define AD7152_CONF_MODE_OFFS_CAL (5 << 0)
#define AD7152_CONF_MODE_GAIN_CAL (6 << 0)
/* Capdac Register Bit Designations (AD7152_REG_CAPDAC_XXX) */
#define AD7152_CAPDAC_DACEN (1 << 7)
#define AD7152_CAPDAC_DACP(x) ((x) & 0x1F)
#define AD7152_MAX_CONV_MODE 6
enum {
AD7152_DATA,
AD7152_OFFS,
AD7152_GAIN,
AD7152_SETUP
};
/*
* struct ad7152_chip_info - chip specifc information
......@@ -77,11 +108,11 @@ static inline ssize_t ad7152_start_calib(struct device *dev,
return 0;
if (this_attr->address == 0)
regval |= (1 << 4);
regval |= AD7152_CONF_CH1EN;
else
regval |= (1 << 3);
regval |= AD7152_CONF_CH2EN;
ret = i2c_smbus_write_byte_data(chip->client, AD7152_CFG, regval);
ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG, regval);
if (ret < 0)
return ret;
/* Unclear on period this should be set for or whether it flips back
......@@ -94,14 +125,16 @@ static ssize_t ad7152_start_offset_calib(struct device *dev,
size_t len)
{
return ad7152_start_calib(dev, attr, buf, len, 5);
return ad7152_start_calib(dev, attr, buf, len,
AD7152_CONF_MODE_OFFS_CAL);
}
static ssize_t ad7152_start_gain_calib(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
return ad7152_start_calib(dev, attr, buf, len, 6);
return ad7152_start_calib(dev, attr, buf, len,
AD7152_CONF_MODE_GAIN_CAL);
}
static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration,
......@@ -140,7 +173,7 @@ static ssize_t ad7152_store_filter_rate_setup(struct device *dev,
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(chip->client, AD7152_CFG2, data);
ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG2, data);
if (ret < 0)
return ret;
......@@ -167,10 +200,10 @@ static const struct attribute_group ad7152_attribute_group = {
};
static const u8 ad7152_addresses[][4] = {
{ AD7152_CH1_DATA_HIGH, AD7152_CH1_OFFS_HIGH,
AD7152_CH1_GAIN_HIGH, AD7152_CH1_SETUP },
{ AD7152_CH2_DATA_HIGH, AD7152_CH2_OFFS_HIGH,
AD7152_CH2_GAIN_HIGH, AD7152_CH2_SETUP },
{ AD7152_REG_CH1_DATA_HIGH, AD7152_REG_CH1_OFFS_HIGH,
AD7152_REG_CH1_GAIN_HIGH, AD7152_REG_CH1_SETUP },
{ AD7152_REG_CH2_DATA_HIGH, AD7152_REG_CH2_OFFS_HIGH,
AD7152_REG_CH2_GAIN_HIGH, AD7152_REG_CH2_SETUP },
};
/* Values are micro relative to pf base. */
......@@ -192,8 +225,8 @@ static int ad7152_write_raw(struct iio_dev *dev_info,
if ((val < 0) | (val > 0xFFFF))
return -EINVAL;
ret = i2c_smbus_write_word_data(chip->client,
ad7152_addresses[chan->channel][2],
val);
ad7152_addresses[chan->channel][AD7152_GAIN],
val);
if (ret < 0)
return ret;
......@@ -203,8 +236,8 @@ static int ad7152_write_raw(struct iio_dev *dev_info,
if ((val < 0) | (val > 0xFFFF))
return -EINVAL;
ret = i2c_smbus_write_word_data(chip->client,
ad7152_addresses[chan->channel][1],
val);
ad7152_addresses[chan->channel][AD7152_OFFS],
val);
if (ret < 0)
return ret;
......@@ -216,13 +249,13 @@ static int ad7152_write_raw(struct iio_dev *dev_info,
if (val2 <= ad7152_scale_table[i])
break;
ret = i2c_smbus_read_byte_data(chip->client,
ad7152_addresses[chan->channel][3]);
ad7152_addresses[chan->channel][AD7152_SETUP]);
if (ret < 0)
return ret;
if ((ret & 0xC0) != i)
ret = i2c_smbus_write_byte_data(chip->client,
ad7152_addresses[chan->channel][3],
(ret & ~0xC0) | i);
ad7152_addresses[chan->channel][AD7152_SETUP],
(ret & ~0xC0) | i);
if (ret < 0)
return ret;
else
......@@ -243,25 +276,25 @@ static int ad7152_read_raw(struct iio_dev *dev_info,
case 0:
/* First set whether in differential mode */
if (chan->differential)
regval = (1 << 5);
regval = AD7152_SETUP_CAPDIFF;
/* Make sure the channel is enabled */
if (chan->channel == 0)
regval |= (1 << 4);
if (chan->address == 0)
regval |= AD7152_CONF_CH1EN;
else
regval |= (1 << 3);
regval |= AD7152_CONF_CH2EN;
/* Trigger a single read */
regval |= 0x02;
regval |= AD7152_CONF_MODE_SINGLE_CONV;
ret = i2c_smbus_write_byte_data(chip->client,
ad7152_addresses[chan->channel][3],
regval);
ad7152_addresses[chan->channel][AD7152_SETUP],
regval);
if (ret < 0)
return ret;
msleep(60); /* Slowest conversion time */
/* Now read the actual register */
ret = i2c_smbus_read_word_data(chip->client,
ad7152_addresses[chan->channel][0]);
ad7152_addresses[chan->channel][AD7152_DATA]);
if (ret < 0)
return ret;
*val = ret;
......@@ -270,7 +303,7 @@ static int ad7152_read_raw(struct iio_dev *dev_info,
case (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE):
/* FIXME: Hmm. very small. it's 1+ 1/(2^16 *val) */
ret = i2c_smbus_read_word_data(chip->client,
ad7152_addresses[chan->channel][2]);
ad7152_addresses[chan->channel][AD7152_GAIN]);
if (ret < 0)
return ret;
*val = ret;
......@@ -278,7 +311,7 @@ static int ad7152_read_raw(struct iio_dev *dev_info,
return IIO_VAL_INT;
case (1 << IIO_CHAN_INFO_CALIBBIAS_SEPARATE):
ret = i2c_smbus_read_word_data(chip->client,
ad7152_addresses[chan->channel][1]);
ad7152_addresses[chan->channel][AD7152_OFFS]);
if (ret < 0)
return ret;
*val = ret;
......@@ -286,7 +319,7 @@ static int ad7152_read_raw(struct iio_dev *dev_info,
return IIO_VAL_INT;
case (1 << IIO_CHAN_INFO_SCALE_SEPARATE):
ret = i2c_smbus_read_byte_data(chip->client,
ad7152_addresses[chan->channel][3]);
ad7152_addresses[chan->channel][AD7152_SETUP]);
if (ret < 0)
return ret;
*val = 0;
......@@ -361,7 +394,7 @@ static int __devinit ad7152_probe(struct i2c_client *client,
chip->client = client;
/* Echipabilish that the iio_dev is a child of the i2c device */
/* Establish that the iio_dev is a child of the i2c device */
indio_dev->name = id->name;
indio_dev->dev.parent = &client->dev;
indio_dev->info = &ad7152_info;
......@@ -406,7 +439,7 @@ MODULE_DEVICE_TABLE(i2c, ad7152_id);
static struct i2c_driver ad7152_driver = {
.driver = {
.name = "ad7152",
.name = KBUILD_MODNAME,
},
.probe = ad7152_probe,
.remove = __devexit_p(ad7152_remove),
......@@ -424,7 +457,7 @@ static __exit void ad7152_exit(void)
}
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ad7152/3 capacitive sensor driver");
MODULE_DESCRIPTION("Analog Devices AD7152/3 capacitive sensor driver");
MODULE_LICENSE("GPL v2");
module_init(ad7152_init);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7