Commit e573d698 authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Chris Ball

mmc: mvsdio: use dev_*() API instead of pr_*() API

The mvsdio driver was already using some dev_*() functions to print
some messages, but still using pr_*() functions for some others. This
patch converts all messages to use dev_*() functions.

Many of the pr_*() function calls were printing the output of
mmc_hostname() to preprend the message with an identifier for the
device. Since the dev_*() functions do that automatically, this patch
also gets rid of those string prefixes.
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 5e81441e
......@@ -119,10 +119,8 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
pr_debug("%s: fallback to PIO for data "
"at 0x%p size %d\n",
mmc_hostname(host->mmc),
host->pio_ptr, host->pio_size);
dev_dbg(host->dev, "fallback to PIO for data at 0x%p size %d\n",
host->pio_ptr, host->pio_size);
return 1;
} else {
dma_addr_t phys_addr;
......@@ -473,8 +471,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (mrq->data)
err_status = mvsd_finish_data(host, mrq->data, err_status);
if (err_status) {
pr_err("%s: unhandled error status %#04x\n",
mmc_hostname(host->mmc), err_status);
dev_err(host->dev, "unhandled error status %#04x\n",
err_status);
cmd->error = -ENOMSG;
}
......@@ -491,9 +489,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (irq_handled)
return IRQ_HANDLED;
pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
"pio=%d\n", mmc_hostname(host->mmc), intr_status,
host->intr_en, host->pio_size);
dev_err(host->dev, "unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
intr_status, host->intr_en, host->pio_size);
return IRQ_NONE;
}
......@@ -507,13 +504,11 @@ static void mvsd_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
pr_err("%s: Timeout waiting for hardware interrupt.\n",
mmc_hostname(host->mmc));
pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
"intr_en=0x%04x\n", mmc_hostname(host->mmc),
mvsd_read(MVSD_HW_STATE),
mvsd_read(MVSD_NOR_INTR_STATUS),
mvsd_read(MVSD_NOR_INTR_EN));
dev_err(host->dev, "Timeout waiting for hardware interrupt.\n");
dev_err(host->dev, "hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
mvsd_read(MVSD_HW_STATE),
mvsd_read(MVSD_NOR_INTR_STATUS),
mvsd_read(MVSD_NOR_INTR_EN));
host->mrq = NULL;
......@@ -778,7 +773,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host);
if (ret) {
pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
dev_err(&pdev->dev, "cannot assign irq %d\n", irq);
goto out;
}
......@@ -797,13 +792,11 @@ static int __init mvsd_probe(struct platform_device *pdev)
if (ret)
goto out;
pr_notice("%s: %s driver initialized, ",
mmc_hostname(mmc), DRIVER_NAME);
if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
printk("using GPIO %d for card detection\n",
gpio_card_detect);
dev_notice(&pdev->dev, "using GPIO %d for card detection\n",
gpio_card_detect);
else
printk("lacking card detect (fall back to polling)\n");
dev_notice(&pdev->dev, "lacking card detect (fall back to polling)\n");
return 0;
out:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment