Commit e581245d authored by Laxman Dewangan's avatar Laxman Dewangan Committed by Stephen Boyd

clk: max77686: Add DT binding details for PMIC MAX77620

Maxim has used the same clock IP on multiple PMICs like MAX77686,
MAX77802, MAX77620. Only differences are the number of clocks
from these PMICs like MAX77686 has 3 clocks output, MAX776802 have
two clock output and MAX77620 has one clock output.

Add clock binding details and DT example for the MAX77620.
Signed-off-by: default avatarLaxman Dewangan <ldewangan@nvidia.com>
CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Javier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 24f668de
Binding for Maxim MAX77686/MAX77802 32k clock generator block
Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
This is a part of device tree bindings of MAX77686/MAX77802 multi-function
device. More information can be found in bindings/mfd/max77686.txt file for
MAX77686 and bindings/mfd/max77802.txt for MAX77802.
This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
multi-function device. More information can be found in MFD DT binding
doc as follows:
bindings/mfd/max77686.txt for MAX77686 and
bindings/mfd/max77802.txt for MAX77802 and
bindings/mfd/max77620.txt for MAX77620.
The MAX77686 contains three 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C.
(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
dt-bindings/clock/maxim,max77686.h.
The MAX77802 contains two 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C.
(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
dt-bindings/clock/maxim,max77802.h.
The MAX77686 contains one 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
dt-bindings/clock/maxim,max77620.h.
Following properties should be presend in main device node of the MFD chip.
......@@ -21,13 +31,12 @@ Optional properties:
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. Following indices are allowed:
- 0: 32khz_ap clock (max77686, max77802),
- 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
- 1: 32khz_cp clock (max77686, max77802),
- 2: 32khz_pmic clock (max77686).
Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
header for MAX77686 and dt-bindings/clock/maxim,max77802.h for MAX77802 and can
be used in device tree sources.
Clocks are defined as preprocessor macros in above dt-binding header for
respective chips.
Example:
......@@ -80,3 +89,26 @@ Example:
clock-names = "my-clock";
clocks = <&max77802 MAX77802_CLK_32K_AP>;
};
3. With MAX77620:
#include <dt-bindings/clock/maxim,max77620.h>
/* ... */
Node of the MFD chip
max77620: max77620@3c {
compatible = "maxim,max77620";
reg = <0x3c>;
#clock-cells = <1>;
/* ... */
};
Clock consumer node
foo@0 {
compatible = "bar,foo";
/* ... */
clock-names = "my-clock";
clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
};
/*
* Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Device Tree binding constants clocks for the Maxim 77620 PMIC.
*/
#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77620_CLOCK_H
#define _DT_BINDINGS_CLOCK_MAXIM_MAX77620_CLOCK_H
/* Fixed rate clocks. */
#define MAX77620_CLK_32K_OUT0 0
/* Total number of clocks. */
#define MAX77620_CLKS_NUM (MAX77620_CLK_32K_OUT0 + 1)
#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77620_CLOCK_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment