Merge branch 'mellanox-next'

Amir Vadai says:

====================
Mellanox ethernet driver update Oct-27-2014

This patchset introduces some small bug fixes, support in get/set of
vlan offload and get/set/capabilities of the link.

First 7 patches by Saeed, add support in setting/getting link speed and getting
cable capabilities.
Next 2 patches also by Saeed, enable the user to turn rx/tx vlan offloading on
and off.
Jenni fixed a bug in error flow during device initalization.
Ido and Jack fixed some code duplication and errors discovered by static checker.
last patch by me is a fix to make ethtool report the actual rings used by
indirection QP.

Patches were applied and tested against commit 61ed53de ("Merge tag 'ntb-3.18'
of git://github.com/jonmason/ntb")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -1338,6 +1338,15 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.verify = NULL,
 		.wrapper = mlx4_QUERY_IF_STAT_wrapper
 	},
+	{
+		.opcode = MLX4_CMD_ACCESS_REG,
+		.has_inbox = true,
+		.has_outbox = true,
+		.out_is_imm = false,
+		.encode_slave_id = false,
+		.verify = NULL,
+		.wrapper = NULL,
+	},
 	/* Native multicast commands are not available for guests */
 	{
 		.opcode = MLX4_CMD_QP_ATTACH,

drivers/net/ethernet/mellanox/mlx4/en_clock.c

@@ -35,52 +35,6 @@
 
 #include "mlx4_en.h"
 
-int mlx4_en_timestamp_config(struct net_device *dev, int tx_type, int rx_filter)
-{
-	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
-	int port_up = 0;
-	int err = 0;
-
-	if (priv->hwtstamp_config.tx_type == tx_type &&
-	    priv->hwtstamp_config.rx_filter == rx_filter)
-		return 0;
-
-	mutex_lock(&mdev->state_lock);
-	if (priv->port_up) {
-		port_up = 1;
-		mlx4_en_stop_port(dev, 1);
-	}
-
-	mlx4_en_free_resources(priv);
-
-	en_warn(priv, "Changing Time Stamp configuration\n");
-
-	priv->hwtstamp_config.tx_type = tx_type;
-	priv->hwtstamp_config.rx_filter = rx_filter;
-
-	if (rx_filter != HWTSTAMP_FILTER_NONE)
-		dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
-	else
-		dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
-
-	err = mlx4_en_alloc_resources(priv);
-	if (err) {
-		en_err(priv, "Failed reallocating port resources\n");
-		goto out;
-	}
-	if (port_up) {
-		err = mlx4_en_start_port(dev);
-		if (err)
-			en_err(priv, "Failed starting port\n");
-	}
-
-out:
-	mutex_unlock(&mdev->state_lock);
-	netdev_features_change(dev);
-	return err;
-}
-
 /* mlx4_en_read_clock - read raw cycle counter (to be used by time counter)
  */
 static cycle_t mlx4_en_read_clock(const struct cyclecounter *tc)

drivers/net/ethernet/mellanox/mlx4/en_main.c

@@ -221,15 +221,12 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 {
 	struct mlx4_en_dev *mdev;
 	int i;
-	int err;
 
 	printk_once(KERN_INFO "%s", mlx4_en_version);
 
 	mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
-	if (!mdev) {
-		err = -ENOMEM;
+	if (!mdev)
 		goto err_free_res;
-	}
 
 	if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
 		goto err_free_dev;
@@ -264,8 +261,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 	}
 
 	/* Build device profile according to supplied module parameters */
-	err = mlx4_en_get_profile(mdev);
-	if (err) {
+	if (mlx4_en_get_profile(mdev)) {
 		mlx4_err(mdev, "Bad module parameters, aborting\n");
 		goto err_mr;
 	}
@@ -286,10 +282,8 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 	 * Note: we cannot use the shared workqueue because of deadlocks caused
 	 *       by the rtnl lock */
 	mdev->workqueue = create_singlethread_workqueue("mlx4_en");
-	if (!mdev->workqueue) {
-		err = -ENOMEM;
+	if (!mdev->workqueue)
 		goto err_mr;
-	}
 
 	/* At this stage all non-port specific tasks are complete:
 	 * mark the card state as up */

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -575,7 +575,7 @@ static int mlx4_en_get_qp(struct mlx4_en_priv *priv)
 	struct mlx4_mac_entry *entry;
 	int index = 0;
 	int err = 0;
-	u64 reg_id;
+	u64 reg_id = 0;
 	int *qpn = &priv->base_qpn;
 	u64 mac = mlx4_mac_to_u64(priv->dev->dev_addr);
 
@@ -1843,8 +1843,7 @@ void mlx4_en_stop_port(struct net_device *dev, int detach)
 		}
 		local_bh_enable();
 
-		while (test_bit(NAPI_STATE_SCHED, &cq->napi.state))
-			msleep(1);
+		napi_synchronize(&cq->napi);
 		mlx4_en_deactivate_rx_ring(priv, priv->rx_ring[i]);
 		mlx4_en_deactivate_cq(priv, cq);
 
@@ -2157,7 +2156,7 @@ static int mlx4_en_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
 		return -ERANGE;
 	}
 
-	if (mlx4_en_timestamp_config(dev, config.tx_type, config.rx_filter)) {
+	if (mlx4_en_reset_config(dev, config, dev->features)) {
 		config.tx_type = HWTSTAMP_TX_OFF;
 		config.rx_filter = HWTSTAMP_FILTER_NONE;
 	}
@@ -2190,6 +2189,16 @@ static int mlx4_en_set_features(struct net_device *netdev,
 		netdev_features_t features)
 {
 	struct mlx4_en_priv *priv = netdev_priv(netdev);
+	int ret = 0;
+
+	if (DEV_FEATURE_CHANGED(netdev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
+		en_info(priv, "Turn %s RX vlan strip offload\n",
+			(features & NETIF_F_HW_VLAN_CTAG_RX) ? "ON" : "OFF");
+		ret = mlx4_en_reset_config(netdev, priv->hwtstamp_config,
+					   features);
+		if (ret)
+			return ret;
+	}
 
 	if (features & NETIF_F_LOOPBACK)
 		priv->ctrl_flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK);
@@ -2431,6 +2440,21 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 
 	priv = netdev_priv(dev);
 	memset(priv, 0, sizeof(struct mlx4_en_priv));
+	spin_lock_init(&priv->stats_lock);
+	INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
+	INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
+	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
+	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
+	INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
+#ifdef CONFIG_MLX4_EN_VXLAN
+	INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
+	INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
+#endif
+#ifdef CONFIG_RFS_ACCEL
+	INIT_LIST_HEAD(&priv->filters);
+	spin_lock_init(&priv->filters_lock);
+#endif
+
 	priv->dev = dev;
 	priv->mdev = mdev;
 	priv->ddev = &mdev->pdev->dev;
@@ -2462,16 +2486,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	priv->cqe_size = mdev->dev->caps.cqe_size;
 	priv->mac_index = -1;
 	priv->msg_enable = MLX4_EN_MSG_LEVEL;
-	spin_lock_init(&priv->stats_lock);
-	INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
-	INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
-	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
-	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
-	INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
-#ifdef CONFIG_MLX4_EN_VXLAN
-	INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
-	INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
-#endif
 #ifdef CONFIG_MLX4_EN_DCB
 	if (!mlx4_is_slave(priv->mdev->dev)) {
 		if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_SET_ETH_SCHED) {
@@ -2514,11 +2528,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	if (err)
 		goto out;
 
-#ifdef CONFIG_RFS_ACCEL
-	INIT_LIST_HEAD(&priv->filters);
-	spin_lock_init(&priv->filters_lock);
-#endif
-
 	/* Initialize time stamping config */
 	priv->hwtstamp_config.flags = 0;
 	priv->hwtstamp_config.tx_type = HWTSTAMP_TX_OFF;
@@ -2559,7 +2568,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	dev->features = dev->hw_features | NETIF_F_HIGHDMA |
 			NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
 			NETIF_F_HW_VLAN_CTAG_FILTER;
-	dev->hw_features |= NETIF_F_LOOPBACK;
+	dev->hw_features |= NETIF_F_LOOPBACK |
+			NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
 
 	if (mdev->dev->caps.steering_mode ==
 	    MLX4_STEERING_MODE_DEVICE_MANAGED)
@@ -2633,3 +2643,79 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	return err;
 }
 
+int mlx4_en_reset_config(struct net_device *dev,
+			 struct hwtstamp_config ts_config,
+			 netdev_features_t features)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int port_up = 0;
+	int err = 0;
+
+	if (priv->hwtstamp_config.tx_type == ts_config.tx_type &&
+	    priv->hwtstamp_config.rx_filter == ts_config.rx_filter &&
+	    !DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX))
+		return 0; /* Nothing to change */
+
+	if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX) &&
+	    (features & NETIF_F_HW_VLAN_CTAG_RX) &&
+	    (priv->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE)) {
+		en_warn(priv, "Can't turn ON rx vlan offload while time-stamping rx filter is ON\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&mdev->state_lock);
+	if (priv->port_up) {
+		port_up = 1;
+		mlx4_en_stop_port(dev, 1);
+	}
+
+	mlx4_en_free_resources(priv);
+
+	en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n",
+		ts_config.rx_filter, !!(features & NETIF_F_HW_VLAN_CTAG_RX));
+
+	priv->hwtstamp_config.tx_type = ts_config.tx_type;
+	priv->hwtstamp_config.rx_filter = ts_config.rx_filter;
+
+	if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
+		if (features & NETIF_F_HW_VLAN_CTAG_RX)
+			dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+		else
+			dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+	} else if (ts_config.rx_filter == HWTSTAMP_FILTER_NONE) {
+		/* RX time-stamping is OFF, update the RX vlan offload
+		 * to the latest wanted state
+		 */
+		if (dev->wanted_features & NETIF_F_HW_VLAN_CTAG_RX)
+			dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+		else
+			dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+	}
+
+	/* RX vlan offload and RX time-stamping can't co-exist !
+	 * Regardless of the caller's choice,
+	 * Turn Off RX vlan offload in case of time-stamping is ON
+	 */
+	if (ts_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+		if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
+			en_warn(priv, "Turning off RX vlan offload since RX time-stamping is ON\n");
+		dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+	}
+
+	err = mlx4_en_alloc_resources(priv);
+	if (err) {
+		en_err(priv, "Failed reallocating port resources\n");
+		goto out;
+	}
+	if (port_up) {
+		err = mlx4_en_start_port(dev);
+		if (err)
+			en_err(priv, "Failed starting port\n");
+	}
+
+out:
+	mutex_unlock(&mdev->state_lock);
+	netdev_features_change(dev);
+	return err;
+}

drivers/net/ethernet/mellanox/mlx4/en_port.c

@@ -91,21 +91,37 @@ int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port)
 	 * already synchronized, no need in locking */
 	state->link_state = !!(qport_context->link_up & MLX4_EN_LINK_UP_MASK);
 	switch (qport_context->link_speed & MLX4_EN_SPEED_MASK) {
+	case MLX4_EN_100M_SPEED:
+		state->link_speed = SPEED_100;
+		break;
 	case MLX4_EN_1G_SPEED:
-		state->link_speed = 1000;
+		state->link_speed = SPEED_1000;
 		break;
 	case MLX4_EN_10G_SPEED_XAUI:
 	case MLX4_EN_10G_SPEED_XFI:
-		state->link_speed = 10000;
+		state->link_speed = SPEED_10000;
+		break;
+	case MLX4_EN_20G_SPEED:
+		state->link_speed = SPEED_20000;
 		break;
 	case MLX4_EN_40G_SPEED:
-		state->link_speed = 40000;
+		state->link_speed = SPEED_40000;
+		break;
+	case MLX4_EN_56G_SPEED:
+		state->link_speed = SPEED_56000;
 		break;
 	default:
 		state->link_speed = -1;
 		break;
 	}
-	state->transciver = qport_context->transceiver;
+
+	state->transceiver = qport_context->transceiver;
+
+	state->flags = 0; /* Reset and recalculate the port flags */
+	state->flags |= (qport_context->link_up & MLX4_EN_ANC_MASK) ?
+		MLX4_EN_PORT_ANC : 0;
+	state->flags |= (qport_context->autoneg & MLX4_EN_AUTONEG_MASK) ?
+		MLX4_EN_PORT_ANE : 0;
 
 out:
 	mlx4_free_cmd_mailbox(mdev->dev, mailbox);

drivers/net/ethernet/mellanox/mlx4/en_port.h

@@ -53,22 +53,49 @@ enum {
 	MLX4_MCAST_ENABLE       = 2,
 };
 
+enum mlx4_link_mode {
+	MLX4_1000BASE_CX_SGMII	 = 0,
+	MLX4_1000BASE_KX	 = 1,
+	MLX4_10GBASE_CX4	 = 2,
+	MLX4_10GBASE_KX4	 = 3,
+	MLX4_10GBASE_KR		 = 4,
+	MLX4_20GBASE_KR2	 = 5,
+	MLX4_40GBASE_CR4	 = 6,
+	MLX4_40GBASE_KR4	 = 7,
+	MLX4_56GBASE_KR4	 = 8,
+	MLX4_10GBASE_CR		 = 12,
+	MLX4_10GBASE_SR		 = 13,
+	MLX4_40GBASE_SR4	 = 15,
+	MLX4_56GBASE_CR4	 = 17,
+	MLX4_56GBASE_SR4	 = 18,
+	MLX4_100BASE_TX		 = 24,
+	MLX4_1000BASE_T		 = 25,
+	MLX4_10GBASE_T		 = 26,
+};
+
+#define MLX4_PROT_MASK(link_mode) (1<<link_mode)
+
 enum {
-	MLX4_EN_1G_SPEED	= 0x02,
-	MLX4_EN_10G_SPEED_XFI	= 0x01,
+	MLX4_EN_100M_SPEED	= 0x04,
 	MLX4_EN_10G_SPEED_XAUI	= 0x00,
+	MLX4_EN_10G_SPEED_XFI	= 0x01,
+	MLX4_EN_1G_SPEED	= 0x02,
+	MLX4_EN_20G_SPEED	= 0x08,
 	MLX4_EN_40G_SPEED	= 0x40,
+	MLX4_EN_56G_SPEED	= 0x20,
 	MLX4_EN_OTHER_SPEED	= 0x0f,
 };
 
 struct mlx4_en_query_port_context {
 	u8 link_up;
 #define MLX4_EN_LINK_UP_MASK	0x80
-	u8 reserved;
+#define MLX4_EN_ANC_MASK	0x40
+	u8 autoneg;
+#define MLX4_EN_AUTONEG_MASK	0x80
 	__be16 mtu;
 	u8 reserved2;
 	u8 link_speed;
-#define MLX4_EN_SPEED_MASK	0x43
+#define MLX4_EN_SPEED_MASK	0x6f
 	u16 reserved3[5];
 	__be64 mac;
 	u8 transceiver;

drivers/net/ethernet/mellanox/mlx4/en_rx.c

@@ -119,7 +119,6 @@ static int mlx4_en_alloc_frags(struct mlx4_en_priv *priv,
 
 out:
 	while (i--) {
-		frag_info = &priv->frag_info[i];
 		if (page_alloc[i].page != ring_alloc[i].page) {
 			dma_unmap_page(priv->ddev, page_alloc[i].dma,
 				page_alloc[i].page_size, PCI_DMA_FROMDEVICE);

drivers/net/ethernet/mellanox/mlx4/en_selftest.c

@@ -129,11 +129,15 @@ static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
 	if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
 		return -ENOMEM;
 
-	/* The device supports 1G, 10G and 40G speeds */
-	if (priv->port_state.link_speed != 1000 &&
-	    priv->port_state.link_speed != 10000 &&
-	    priv->port_state.link_speed != 40000)
+	/* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */
+	if (priv->port_state.link_speed != SPEED_100 &&
+	    priv->port_state.link_speed != SPEED_1000 &&
+	    priv->port_state.link_speed != SPEED_10000 &&
+	    priv->port_state.link_speed != SPEED_20000 &&
+	    priv->port_state.link_speed != SPEED_40000 &&
+	    priv->port_state.link_speed != SPEED_56000)
 		return priv->port_state.link_speed;
+
 	return 0;
 }
 

drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -139,7 +139,9 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[10] = "TCP/IP offloads/flow-steering for VXLAN support",
 		[11] = "MAD DEMUX (Secure-Host) support",
 		[12] = "Large cache line (>64B) CQE stride support",
-		[13] = "Large cache line (>64B) EQE stride support"
+		[13] = "Large cache line (>64B) EQE stride support",
+		[14] = "Ethernet protocol control support",
+		[15] = "Ethernet Backplane autoneg support"
 	};
 	int i;
 
@@ -560,6 +562,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET	0x76
 #define QUERY_DEV_CAP_FLOW_STEERING_MAX_QP_OFFSET	0x77
 #define QUERY_DEV_CAP_CQ_EQ_CACHE_LINE_STRIDE	0x7a
+#define QUERY_DEV_CAP_ETH_PROT_CTRL_OFFSET	0x7a
 #define QUERY_DEV_CAP_RDMARC_ENTRY_SZ_OFFSET	0x80
 #define QUERY_DEV_CAP_QPC_ENTRY_SZ_OFFSET	0x82
 #define QUERY_DEV_CAP_AUX_ENTRY_SZ_OFFSET	0x84
@@ -573,6 +576,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_DEV_CAP_BMME_FLAGS_OFFSET		0x94
 #define QUERY_DEV_CAP_RSVD_LKEY_OFFSET		0x98
 #define QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET		0xa0
+#define QUERY_DEV_CAP_ETH_BACKPL_OFFSET		0x9c
 #define QUERY_DEV_CAP_FW_REASSIGN_MAC		0x9d
 #define QUERY_DEV_CAP_VXLAN			0x9e
 #define QUERY_DEV_CAP_MAD_DEMUX_OFFSET		0xb0
@@ -737,15 +741,19 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	MLX4_GET(size, outbox, QUERY_DEV_CAP_MAX_DESC_SZ_RQ_OFFSET);
 	dev_cap->max_rq_desc_sz = size;
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_CQ_EQ_CACHE_LINE_STRIDE);
+	if (field & (1 << 5))
+		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL;
 	if (field & (1 << 6))
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_CQE_STRIDE;
 	if (field & (1 << 7))
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_EQE_STRIDE;
-
 	MLX4_GET(dev_cap->bmme_flags, outbox,
 		 QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
 	MLX4_GET(dev_cap->reserved_lkey, outbox,
 		 QUERY_DEV_CAP_RSVD_LKEY_OFFSET);
+	MLX4_GET(field32, outbox, QUERY_DEV_CAP_ETH_BACKPL_OFFSET);
+	if (field32 & (1 << 0))
+		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP;
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_FW_REASSIGN_MAC);
 	if (field & 1<<6)
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN;
@@ -2144,3 +2152,114 @@ int mlx4_config_mad_demux(struct mlx4_dev *dev)
 	mlx4_free_cmd_mailbox(dev, mailbox);
 	return err;
 }
+
+/* Access Reg commands */
+enum mlx4_access_reg_masks {
+	MLX4_ACCESS_REG_STATUS_MASK = 0x7f,
+	MLX4_ACCESS_REG_METHOD_MASK = 0x7f,
+	MLX4_ACCESS_REG_LEN_MASK = 0x7ff
+};
+
+struct mlx4_access_reg {
+	__be16 constant1;
+	u8 status;
+	u8 resrvd1;
+	__be16 reg_id;
+	u8 method;
+	u8 constant2;
+	__be32 resrvd2[2];
+	__be16 len_const;
+	__be16 resrvd3;
+#define MLX4_ACCESS_REG_HEADER_SIZE (20)
+	u8 reg_data[MLX4_MAILBOX_SIZE-MLX4_ACCESS_REG_HEADER_SIZE];
+} __attribute__((__packed__));
+
+/**
+ * mlx4_ACCESS_REG - Generic access reg command.
+ * @dev: mlx4_dev.
+ * @reg_id: register ID to access.
+ * @method: Access method Read/Write.
+ * @reg_len: register length to Read/Write in bytes.
+ * @reg_data: reg_data pointer to Read/Write From/To.
+ *
+ * Access ConnectX registers FW command.
+ * Returns 0 on success and copies outbox mlx4_access_reg data
+ * field into reg_data or a negative error code.
+ */
+static int mlx4_ACCESS_REG(struct mlx4_dev *dev, u16 reg_id,
+			   enum mlx4_access_reg_method method,
+			   u16 reg_len, void *reg_data)
+{
+	struct mlx4_cmd_mailbox *inbox, *outbox;
+	struct mlx4_access_reg *inbuf, *outbuf;
+	int err;
+
+	inbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(inbox))
+		return PTR_ERR(inbox);
+
+	outbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(outbox)) {
+		mlx4_free_cmd_mailbox(dev, inbox);
+		return PTR_ERR(outbox);
+	}
+
+	inbuf = inbox->buf;
+	outbuf = outbox->buf;
+
+	inbuf->constant1 = cpu_to_be16(0x1<<11 | 0x4);
+	inbuf->constant2 = 0x1;
+	inbuf->reg_id = cpu_to_be16(reg_id);
+	inbuf->method = method & MLX4_ACCESS_REG_METHOD_MASK;
+
+	reg_len = min(reg_len, (u16)(sizeof(inbuf->reg_data)));
+	inbuf->len_const =
+		cpu_to_be16(((reg_len/4 + 1) & MLX4_ACCESS_REG_LEN_MASK) |
+			    ((0x3) << 12));
+
+	memcpy(inbuf->reg_data, reg_data, reg_len);
+	err = mlx4_cmd_box(dev, inbox->dma, outbox->dma, 0, 0,
+			   MLX4_CMD_ACCESS_REG, MLX4_CMD_TIME_CLASS_C,
+			   MLX4_CMD_NATIVE);
+	if (err)
+		goto out;
+
+	if (outbuf->status & MLX4_ACCESS_REG_STATUS_MASK) {
+		err = outbuf->status & MLX4_ACCESS_REG_STATUS_MASK;
+		mlx4_err(dev,
+			 "MLX4_CMD_ACCESS_REG(%x) returned REG status (%x)\n",
+			 reg_id, err);
+		goto out;
+	}
+
+	memcpy(reg_data, outbuf->reg_data, reg_len);
+out:
+	mlx4_free_cmd_mailbox(dev, inbox);
+	mlx4_free_cmd_mailbox(dev, outbox);
+	return err;
+}
+
+/* ConnectX registers IDs */
+enum mlx4_reg_id {
+	MLX4_REG_ID_PTYS = 0x5004,
+};
+
+/**
+ * mlx4_ACCESS_PTYS_REG - Access PTYs (Port Type and Speed)
+ * register
+ * @dev: mlx4_dev.
+ * @method: Access method Read/Write.
+ * @ptys_reg: PTYS register data pointer.
+ *
+ * Access ConnectX PTYS register, to Read/Write Port Type/Speed
+ * configuration
+ * Returns 0 on success or a negative error code.
+ */
+int mlx4_ACCESS_PTYS_REG(struct mlx4_dev *dev,
+			 enum mlx4_access_reg_method method,
+			 struct mlx4_ptys_reg *ptys_reg)
+{
+	return mlx4_ACCESS_REG(dev, MLX4_REG_ID_PTYS,
+			       method, sizeof(*ptys_reg), ptys_reg);
+}
+EXPORT_SYMBOL_GPL(mlx4_ACCESS_PTYS_REG);

drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

@@ -421,10 +421,16 @@ struct mlx4_en_rss_map {
 	enum mlx4_qp_state indir_state;
 };
 
+enum mlx4_en_port_flag {
+	MLX4_EN_PORT_ANC = 1<<0, /* Auto-negotiation complete */
+	MLX4_EN_PORT_ANE = 1<<1, /* Auto-negotiation enabled */
+};
+
 struct mlx4_en_port_state {
 	int link_state;
 	int link_speed;
-	int transciver;
+	int transceiver;
+	u32 flags;
 };
 
 struct mlx4_en_pkt_stats {
@@ -829,6 +835,13 @@ void mlx4_en_cleanup_filters(struct mlx4_en_priv *priv);
 void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf);
 void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev);
 
+#define DEV_FEATURE_CHANGED(dev, new_features, feature) \
+	((dev->features & feature) ^ (new_features & feature))
+
+int mlx4_en_reset_config(struct net_device *dev,
+			 struct hwtstamp_config ts_config,
+			 netdev_features_t new_features);
+
 /*
  * Functions for time stamping
  */
@@ -838,9 +851,6 @@ void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
 			    u64 timestamp);
 void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev);
 void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev);
-int mlx4_en_timestamp_config(struct net_device *dev,
-			     int tx_type,
-			     int rx_filter);
 
 /* Globals
  */

drivers/net/ethernet/mellanox/mlx4/port.c

@@ -1311,3 +1311,159 @@ int mlx4_get_roce_gid_from_slave(struct mlx4_dev *dev, int port, int slave_id,
 	return 0;
 }
 EXPORT_SYMBOL(mlx4_get_roce_gid_from_slave);
+
+/* Cable Module Info */
+#define MODULE_INFO_MAX_READ 48
+
+#define I2C_ADDR_LOW  0x50
+#define I2C_ADDR_HIGH 0x51
+#define I2C_PAGE_SIZE 256
+
+/* Module Info Data */
+struct mlx4_cable_info {
+	u8	i2c_addr;
+	u8	page_num;
+	__be16	dev_mem_address;
+	__be16	reserved1;
+	__be16	size;
+	__be32	reserved2[2];
+	u8	data[MODULE_INFO_MAX_READ];
+};
+
+enum cable_info_err {
+	 CABLE_INF_INV_PORT      = 0x1,
+	 CABLE_INF_OP_NOSUP      = 0x2,
+	 CABLE_INF_NOT_CONN      = 0x3,
+	 CABLE_INF_NO_EEPRM      = 0x4,
+	 CABLE_INF_PAGE_ERR      = 0x5,
+	 CABLE_INF_INV_ADDR      = 0x6,
+	 CABLE_INF_I2C_ADDR      = 0x7,
+	 CABLE_INF_QSFP_VIO      = 0x8,
+	 CABLE_INF_I2C_BUSY      = 0x9,
+};
+
+#define MAD_STATUS_2_CABLE_ERR(mad_status) ((mad_status >> 8) & 0xFF)
+
+static inline const char *cable_info_mad_err_str(u16 mad_status)
+{
+	u8 err = MAD_STATUS_2_CABLE_ERR(mad_status);
+
+	switch (err) {
+	case CABLE_INF_INV_PORT:
+		return "invalid port selected";
+	case CABLE_INF_OP_NOSUP:
+		return "operation not supported for this port (the port is of type CX4 or internal)";
+	case CABLE_INF_NOT_CONN:
+		return "cable is not connected";
+	case CABLE_INF_NO_EEPRM:
+		return "the connected cable has no EPROM (passive copper cable)";
+	case CABLE_INF_PAGE_ERR:
+		return "page number is greater than 15";
+	case CABLE_INF_INV_ADDR:
+		return "invalid device_address or size (that is, size equals 0 or address+size is greater than 256)";
+	case CABLE_INF_I2C_ADDR:
+		return "invalid I2C slave address";
+	case CABLE_INF_QSFP_VIO:
+		return "at least one cable violates the QSFP specification and ignores the modsel signal";
+	case CABLE_INF_I2C_BUSY:
+		return "I2C bus is constantly busy";
+	}
+	return "Unknown Error";
+}
+
+/**
+ * mlx4_get_module_info - Read cable module eeprom data
+ * @dev: mlx4_dev.
+ * @port: port number.
+ * @offset: byte offset in eeprom to start reading data from.
+ * @size: num of bytes to read.
+ * @data: output buffer to put the requested data into.
+ *
+ * Reads cable module eeprom data, puts the outcome data into
+ * data pointer paramer.
+ * Returns num of read bytes on success or a negative error
+ * code.
+ */
+int mlx4_get_module_info(struct mlx4_dev *dev, u8 port,
+			 u16 offset, u16 size, u8 *data)
+{
+	struct mlx4_cmd_mailbox *inbox, *outbox;
+	struct mlx4_mad_ifc *inmad, *outmad;
+	struct mlx4_cable_info *cable_info;
+	u16 i2c_addr;
+	int ret;
+
+	if (size > MODULE_INFO_MAX_READ)
+		size = MODULE_INFO_MAX_READ;
+
+	inbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(inbox))
+		return PTR_ERR(inbox);
+
+	outbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(outbox)) {
+		mlx4_free_cmd_mailbox(dev, inbox);
+		return PTR_ERR(outbox);
+	}
+
+	inmad = (struct mlx4_mad_ifc *)(inbox->buf);
+	outmad = (struct mlx4_mad_ifc *)(outbox->buf);
+
+	inmad->method = 0x1; /* Get */
+	inmad->class_version = 0x1;
+	inmad->mgmt_class = 0x1;
+	inmad->base_version = 0x1;
+	inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */
+
+	if (offset < I2C_PAGE_SIZE && offset + size > I2C_PAGE_SIZE)
+		/* Cross pages reads are not allowed
+		 * read until offset 256 in low page
+		 */
+		size -= offset + size - I2C_PAGE_SIZE;
+
+	i2c_addr = I2C_ADDR_LOW;
+	if (offset >= I2C_PAGE_SIZE) {
+		/* Reset offset to high page */
+		i2c_addr = I2C_ADDR_HIGH;
+		offset -= I2C_PAGE_SIZE;
+	}
+
+	cable_info = (struct mlx4_cable_info *)inmad->data;
+	cable_info->dev_mem_address = cpu_to_be16(offset);
+	cable_info->page_num = 0;
+	cable_info->i2c_addr = i2c_addr;
+	cable_info->size = cpu_to_be16(size);
+
+	ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
+			   MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C,
+			   MLX4_CMD_NATIVE);
+	if (ret)
+		goto out;
+
+	if (be16_to_cpu(outmad->status)) {
+		/* Mad returned with bad status */
+		ret = be16_to_cpu(outmad->status);
+		mlx4_warn(dev,
+			  "MLX4_CMD_MAD_IFC Get Module info attr(%x) port(%d) i2c_addr(%x) offset(%d) size(%d): Response Mad Status(%x) - %s\n",
+			  0xFF60, port, i2c_addr, offset, size,
+			  ret, cable_info_mad_err_str(ret));
+
+		if (i2c_addr == I2C_ADDR_HIGH &&
+		    MAD_STATUS_2_CABLE_ERR(ret) == CABLE_INF_I2C_ADDR)
+			/* Some SFP cables do not support i2c slave
+			 * address 0x51 (high page), abort silently.
+			 */
+			ret = 0;
+		else
+			ret = -ret;
+		goto out;
+	}
+	cable_info = (struct mlx4_cable_info *)outmad->data;
+	memcpy(data, cable_info->data, size);
+	ret = size;
+out:
+	mlx4_free_cmd_mailbox(dev, inbox);
+	mlx4_free_cmd_mailbox(dev, outbox);
+	return ret;
+}
+EXPORT_SYMBOL(mlx4_get_module_info);

include/linux/mlx4/cmd.h

@@ -67,6 +67,8 @@ enum {
 	MLX4_CMD_MAP_ICM_AUX	 = 0xffc,
 	MLX4_CMD_UNMAP_ICM_AUX	 = 0xffb,
 	MLX4_CMD_SET_ICM_SIZE	 = 0xffd,
+	MLX4_CMD_ACCESS_REG	 = 0x3b,
+
 	/*master notify fw on finish for slave's flr*/
 	MLX4_CMD_INFORM_FLR_DONE = 0x5b,
 	MLX4_CMD_GET_OP_REQ      = 0x59,

include/linux/mlx4/device.h

@@ -186,7 +186,9 @@ enum {
 	MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS	= 1LL <<  10,
 	MLX4_DEV_CAP_FLAG2_MAD_DEMUX		= 1LL <<  11,
 	MLX4_DEV_CAP_FLAG2_CQE_STRIDE		= 1LL <<  12,
-	MLX4_DEV_CAP_FLAG2_EQE_STRIDE		= 1LL <<  13
+	MLX4_DEV_CAP_FLAG2_EQE_STRIDE		= 1LL <<  13,
+	MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL        = 1LL <<  14,
+	MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP	= 1LL <<  15
 };
 
 enum {
@@ -379,6 +381,13 @@ enum {
 #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \
 			     MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK)
 
+enum mlx4_module_id {
+	MLX4_MODULE_ID_SFP              = 0x3,
+	MLX4_MODULE_ID_QSFP             = 0xC,
+	MLX4_MODULE_ID_QSFP_PLUS        = 0xD,
+	MLX4_MODULE_ID_QSFP28           = 0x11,
+};
+
 static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
 {
 	return (major << 32) | (minor << 16) | subminor;
@@ -799,6 +808,26 @@ struct mlx4_init_port_param {
 	u64			si_guid;
 };
 
+#define MAD_IFC_DATA_SZ 192
+/* MAD IFC Mailbox */
+struct mlx4_mad_ifc {
+	u8	base_version;
+	u8	mgmt_class;
+	u8	class_version;
+	u8	method;
+	__be16	status;
+	__be16	class_specific;
+	__be64	tid;
+	__be16	attr_id;
+	__be16	resv;
+	__be32	attr_mod;
+	__be64	mkey;
+	__be16	dr_slid;
+	__be16	dr_dlid;
+	u8	reserved[28];
+	u8	data[MAD_IFC_DATA_SZ];
+} __packed;
+
 #define mlx4_foreach_port(port, dev, type)				\
 	for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++)	\
 		if ((type) == (dev)->caps.port_mask[(port)])
@@ -1283,10 +1312,50 @@ int mlx4_mr_rereg_mem_write(struct mlx4_dev *dev, struct mlx4_mr *mr,
 			    u64 iova, u64 size, int npages,
 			    int page_shift, struct mlx4_mpt_entry *mpt_entry);
 
+int mlx4_get_module_info(struct mlx4_dev *dev, u8 port,
+			 u16 offset, u16 size, u8 *data);
+
 /* Returns true if running in low memory profile (kdump kernel) */
 static inline bool mlx4_low_memory_profile(void)
 {
 	return is_kdump_kernel();
 }
 
+/* ACCESS REG commands */
+enum mlx4_access_reg_method {
+	MLX4_ACCESS_REG_QUERY = 0x1,
+	MLX4_ACCESS_REG_WRITE = 0x2,
+};
+
+/* ACCESS PTYS Reg command */
+enum mlx4_ptys_proto {
+	MLX4_PTYS_IB = 1<<0,
+	MLX4_PTYS_EN = 1<<2,
+};
+
+struct mlx4_ptys_reg {
+	u8 resrvd1;
+	u8 local_port;
+	u8 resrvd2;
+	u8 proto_mask;
+	__be32 resrvd3[2];
+	__be32 eth_proto_cap;
+	__be16 ib_width_cap;
+	__be16 ib_speed_cap;
+	__be32 resrvd4;
+	__be32 eth_proto_admin;
+	__be16 ib_width_admin;
+	__be16 ib_speed_admin;
+	__be32 resrvd5;
+	__be32 eth_proto_oper;
+	__be16 ib_width_oper;
+	__be16 ib_speed_oper;
+	__be32 resrvd6;
+	__be32 eth_proto_lp_adv;
+} __packed;
+
+int mlx4_ACCESS_PTYS_REG(struct mlx4_dev *dev,
+			 enum mlx4_access_reg_method method,
+			 struct mlx4_ptys_reg *ptys_reg);
+
 #endif /* MLX4_DEVICE_H */

include/uapi/linux/ethtool.h

@@ -1213,6 +1213,10 @@ enum ethtool_sfeatures_retval_bits {
 #define SUPPORTED_40000baseCR4_Full	(1 << 24)
 #define SUPPORTED_40000baseSR4_Full	(1 << 25)
 #define SUPPORTED_40000baseLR4_Full	(1 << 26)
+#define SUPPORTED_56000baseKR4_Full	(1 << 27)
+#define SUPPORTED_56000baseCR4_Full	(1 << 28)
+#define SUPPORTED_56000baseSR4_Full	(1 << 29)
+#define SUPPORTED_56000baseLR4_Full	(1 << 30)
 
 #define ADVERTISED_10baseT_Half		(1 << 0)
 #define ADVERTISED_10baseT_Full		(1 << 1)
@@ -1241,6 +1245,10 @@ enum ethtool_sfeatures_retval_bits {
 #define ADVERTISED_40000baseCR4_Full	(1 << 24)
 #define ADVERTISED_40000baseSR4_Full	(1 << 25)
 #define ADVERTISED_40000baseLR4_Full	(1 << 26)
+#define ADVERTISED_56000baseKR4_Full	(1 << 27)
+#define ADVERTISED_56000baseCR4_Full	(1 << 28)
+#define ADVERTISED_56000baseSR4_Full	(1 << 29)
+#define ADVERTISED_56000baseLR4_Full	(1 << 30)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -1248,12 +1256,16 @@ enum ethtool_sfeatures_retval_bits {
  * it was forced up into this mode or autonegotiated.
  */
 
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+/* The forced speed, 10Mb, 100Mb, gigabit, [2.5|10|20|40|56]GbE. */
 #define SPEED_10		10
 #define SPEED_100		100
 #define SPEED_1000		1000
 #define SPEED_2500		2500
 #define SPEED_10000		10000
+#define SPEED_20000		20000
+#define SPEED_40000		40000
+#define SPEED_56000		56000
+
 #define SPEED_UNKNOWN		-1
 
 /* Duplex, half or full. */
@@ -1343,6 +1355,10 @@ enum ethtool_sfeatures_retval_bits {
 #define ETH_MODULE_SFF_8079_LEN		256
 #define ETH_MODULE_SFF_8472		0x2
 #define ETH_MODULE_SFF_8472_LEN		512
+#define ETH_MODULE_SFF_8636		0x3
+#define ETH_MODULE_SFF_8636_LEN		256
+#define ETH_MODULE_SFF_8436		0x4
+#define ETH_MODULE_SFF_8436_LEN		256
 
 /* Reset flags */
 /* The reset() operation must clear the flags for the components which