Commit e5945143 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Jason Cooper

ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII

Pinctrl settings for GE0 and GE1 are not only usable on RD-AXPWiFiAP.
Moreover, naming the RGMII settings pmx-ge{0,1} is not precise enough
as there is also a GMII setting for GE0.

Move the pinctrl sub-nodes to the common pinctrl node and rename them
to pmx-ge{0,1}-rgmii.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-By: default avatarBenoit Masson <yahoo@perenite.com>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 01c43422
......@@ -84,14 +84,14 @@ phy1: ethernet-phy@1 {
};
ethernet@70000 {
pinctrl-0 = <&pmx_ge0>;
pinctrl-0 = <&pmx_ge0_rgmii>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&pmx_ge1>;
pinctrl-0 = <&pmx_ge1_rgmii>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
......@@ -133,20 +133,6 @@ &pinctrl {
pinctrl-0 = <&pmx_phy_int>;
pinctrl-names = "default";
pmx_ge0: pmx-ge0 {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
marvell,function = "ge0";
};
pmx_ge1: pmx-ge1 {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
pmx_keys: pmx-keys {
marvell,pins = "mpp33";
marvell,function = "gpio";
......
......@@ -75,6 +75,22 @@ serial@12300 {
pinctrl: pin-ctrl@18000 {
reg = <0x18000 0x38>;
pmx_ge0_rgmii: pmx-ge0-rgmii {
marvell,pins =
"mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
marvell,function = "ge0";
};
pmx_ge1_rgmii: pmx-ge1-rgmii {
marvell,pins =
"mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
"mpp33", "mpp34", "mpp35";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment