Commit e5e26439 authored by Sean Young's avatar Sean Young Committed by Mauro Carvalho Chehab

media: rc-core: improve ir_raw_store_edge() handling

The gpio-ir-recv driver does many wakeups (once per edge); the saa7134
driver has special handling to only wakeup 15ms after the first edge.
Make this part of rc-core so gpio-ir-recv also benefits from
this (so a rc-5 keypress now causes 3 wakeups rather than 24).
Signed-off-by: default avatarSean Young <sean@mess.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 4fe055ec
......@@ -452,13 +452,6 @@ static void saa7134_input_timer(unsigned long data)
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
static void ir_raw_decode_timer_end(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev *)data;
ir_raw_event_handle(dev->remote->dev);
}
static int __saa7134_ir_start(void *priv)
{
struct saa7134_dev *dev = priv;
......@@ -514,10 +507,6 @@ static int __saa7134_ir_start(void *priv)
(unsigned long)dev);
ir->timer.expires = jiffies + HZ;
add_timer(&ir->timer);
} else if (ir->raw_decode) {
/* set timer_end for code completion */
setup_timer(&ir->timer, ir_raw_decode_timer_end,
(unsigned long)dev);
}
return 0;
......@@ -535,7 +524,7 @@ static void __saa7134_ir_stop(void *priv)
if (!ir->running)
return;
if (ir->polling || ir->raw_decode)
if (ir->polling)
del_timer_sync(&ir->timer);
ir->running = false;
......@@ -1057,7 +1046,6 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
{
struct saa7134_card_ir *ir = dev->remote;
unsigned long timeout;
int space;
/* Generate initial event */
......@@ -1066,17 +1054,5 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE);
/*
* Wait 15 ms from the start of the first IR event before processing
* the event. This time is enough for NEC protocol. May need adjustments
* to work with other protocols.
*/
smp_mb();
if (!timer_pending(&ir->timer)) {
timeout = jiffies + msecs_to_jiffies(15);
mod_timer(&ir->timer, timeout);
}
return 1;
}
......@@ -43,6 +43,8 @@ struct ir_raw_event_ctrl {
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
struct rc_dev *dev; /* pointer to the parent rc_dev */
/* edge driver */
struct timer_list edge_handle;
/* raw decoder state follows */
struct ir_raw_event prev_ev;
......
......@@ -133,6 +133,11 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
dev->raw->last_event = now;
dev->raw->last_type = type;
if (!timer_pending(&dev->raw->edge_handle))
mod_timer(&dev->raw->edge_handle,
jiffies + msecs_to_jiffies(15));
return rc;
}
EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
......@@ -483,6 +488,13 @@ int ir_raw_encode_scancode(enum rc_type protocol, u32 scancode,
}
EXPORT_SYMBOL(ir_raw_encode_scancode);
static void edge_handle(unsigned long arg)
{
struct rc_dev *dev = (struct rc_dev *)arg;
ir_raw_event_handle(dev);
}
/*
* Used to (un)register raw event clients
*/
......@@ -504,6 +516,8 @@ int ir_raw_event_prepare(struct rc_dev *dev)
dev->raw->dev = dev;
dev->change_protocol = change_protocol;
setup_timer(&dev->raw->edge_handle, edge_handle,
(unsigned long)dev);
INIT_KFIFO(dev->raw->kfifo);
return 0;
......@@ -555,6 +569,7 @@ void ir_raw_event_unregister(struct rc_dev *dev)
return;
kthread_stop(dev->raw->thread);
del_timer_sync(&dev->raw->edge_handle);
mutex_lock(&ir_raw_handler_lock);
list_del(&dev->raw->list);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment