crypto: caam - enable raw data instead of von Neumann data

The sampling of the oscillator can be done in multiple modes for
generating the entropy value. By default, this is set to von
Neumann. This patch changes the sampling to raw data, since it
has been discovered that the generated entropy has a better
'quality'.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/caam/ctrl.c

@@ -357,8 +357,17 @@ static void kick_trng(struct platform_device *pdev, int ent_delay)
 	wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
 	/* disable maximum frequency count */
 	wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
+	/* read the control register */
+	val = rd_reg32(&r4tst->rtmctl);
+	/*
+	 * select raw sampling in both entropy shifter
+	 * and statistical checker
+	 */
+	setbits32(&val, RTMCTL_SAMP_MODE_RAW_ES_SC);
 	/* put RNG4 into run mode */
-	clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
+	clrbits32(&val, RTMCTL_PRGM);
+	/* write back the control register */
+	wr_reg32(&r4tst->rtmctl, val);
 }
 
 /**

drivers/crypto/caam/regs.h

@@ -269,6 +269,16 @@ struct rngtst {
 /* RNG4 TRNG test registers */
 struct rng4tst {
 #define RTMCTL_PRGM	0x00010000	/* 1 -> program mode, 0 -> run mode */
+#define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_SC	0 /* use von Neumann data in
+						     both entropy shifter and
+						     statistical checker */
+#define RTMCTL_SAMP_MODE_RAW_ES_SC		1 /* use raw data in both
+						     entropy shifter and
+						     statistical checker */
+#define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_RAW_SC	2 /* use von Neumann data in
+						     entropy shifter, raw data
+						     in statistical checker */
+#define RTMCTL_SAMP_MODE_INVALID		3 /* invalid combination */
 	u32 rtmctl;		/* misc. control register */
 	u32 rtscmisc;		/* statistical check misc. register */
 	u32 rtpkrrng;		/* poker range register */