Commit e6008857 authored by Noralf Trønnes's avatar Noralf Trønnes Committed by Greg Kroah-Hartman

staging: fbtft: remove ARCH_BCM2708 optimization

ARCH_BCM2708 is not present in mainline so remove optimization.
Signed-off-by: default avatarNoralf Trønnes <notro@tronnes.org>
Reported-by: default avatarPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 484c60e2
......@@ -2,9 +2,6 @@
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#ifdef CONFIG_ARCH_BCM2708
#include <mach/platform.h>
#endif
#include "fbtft.h"
int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len)
......@@ -129,171 +126,6 @@ int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len)
}
EXPORT_SYMBOL(fbtft_read_spi);
#ifdef CONFIG_ARCH_BCM2708
/*
* Raspberry Pi
* - writing directly to the registers is 40-50% faster than
* optimized use of gpiolib
*/
#define GPIOSET(no, ishigh) \
do { \
if (ishigh) \
set |= (1 << (no)); \
else \
reset |= (1 << (no)); \
} while (0)
int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
{
unsigned int set = 0;
unsigned int reset = 0;
u8 data;
fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
"%s(len=%d): ", __func__, len);
while (len--) {
data = *(u8 *) buf;
buf++;
/* Set data */
GPIOSET(par->gpio.db[0], (data&0x01));
GPIOSET(par->gpio.db[1], (data&0x02));
GPIOSET(par->gpio.db[2], (data&0x04));
GPIOSET(par->gpio.db[3], (data&0x08));
GPIOSET(par->gpio.db[4], (data&0x10));
GPIOSET(par->gpio.db[5], (data&0x20));
GPIOSET(par->gpio.db[6], (data&0x40));
GPIOSET(par->gpio.db[7], (data&0x80));
writel(set, __io_address(GPIO_BASE+0x1C));
writel(reset, __io_address(GPIO_BASE+0x28));
/* Pulse /WR low */
writel((1<<par->gpio.wr), __io_address(GPIO_BASE+0x28));
writel(0, __io_address(GPIO_BASE+0x28)); /* used as a delay */
writel((1<<par->gpio.wr), __io_address(GPIO_BASE+0x1C));
set = 0;
reset = 0;
}
return 0;
}
EXPORT_SYMBOL(fbtft_write_gpio8_wr);
int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
{
unsigned int set = 0;
unsigned int reset = 0;
u16 data;
fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
"%s(len=%d): ", __func__, len);
while (len) {
len -= 2;
data = *(u16 *) buf;
buf += 2;
/* Start writing by pulling down /WR */
gpio_set_value(par->gpio.wr, 0);
/* Set data */
GPIOSET(par->gpio.db[0], (data&0x0001));
GPIOSET(par->gpio.db[1], (data&0x0002));
GPIOSET(par->gpio.db[2], (data&0x0004));
GPIOSET(par->gpio.db[3], (data&0x0008));
GPIOSET(par->gpio.db[4], (data&0x0010));
GPIOSET(par->gpio.db[5], (data&0x0020));
GPIOSET(par->gpio.db[6], (data&0x0040));
GPIOSET(par->gpio.db[7], (data&0x0080));
GPIOSET(par->gpio.db[8], (data&0x0100));
GPIOSET(par->gpio.db[9], (data&0x0200));
GPIOSET(par->gpio.db[10], (data&0x0400));
GPIOSET(par->gpio.db[11], (data&0x0800));
GPIOSET(par->gpio.db[12], (data&0x1000));
GPIOSET(par->gpio.db[13], (data&0x2000));
GPIOSET(par->gpio.db[14], (data&0x4000));
GPIOSET(par->gpio.db[15], (data&0x8000));
writel(set, __io_address(GPIO_BASE+0x1C));
writel(reset, __io_address(GPIO_BASE+0x28));
/* Pullup /WR */
gpio_set_value(par->gpio.wr, 1);
set = 0;
reset = 0;
}
return 0;
}
EXPORT_SYMBOL(fbtft_write_gpio16_wr);
int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len)
{
unsigned int set = 0;
unsigned int reset = 0;
u16 data;
fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
"%s(len=%d): ", __func__, len);
while (len) {
len -= 2;
data = *(u16 *) buf;
buf += 2;
/* Start writing by pulling down /WR */
gpio_set_value(par->gpio.wr, 0);
/* Low byte */
GPIOSET(par->gpio.db[0], (data&0x0001));
GPIOSET(par->gpio.db[1], (data&0x0002));
GPIOSET(par->gpio.db[2], (data&0x0004));
GPIOSET(par->gpio.db[3], (data&0x0008));
GPIOSET(par->gpio.db[4], (data&0x0010));
GPIOSET(par->gpio.db[5], (data&0x0020));
GPIOSET(par->gpio.db[6], (data&0x0040));
GPIOSET(par->gpio.db[7], (data&0x0080));
writel(set, __io_address(GPIO_BASE+0x1C));
writel(reset, __io_address(GPIO_BASE+0x28));
/* Pulse 'latch' high */
gpio_set_value(par->gpio.latch, 1);
gpio_set_value(par->gpio.latch, 0);
/* High byte */
GPIOSET(par->gpio.db[0], (data&0x0100));
GPIOSET(par->gpio.db[1], (data&0x0200));
GPIOSET(par->gpio.db[2], (data&0x0400));
GPIOSET(par->gpio.db[3], (data&0x0800));
GPIOSET(par->gpio.db[4], (data&0x1000));
GPIOSET(par->gpio.db[5], (data&0x2000));
GPIOSET(par->gpio.db[6], (data&0x4000));
GPIOSET(par->gpio.db[7], (data&0x8000));
writel(set, __io_address(GPIO_BASE+0x1C));
writel(reset, __io_address(GPIO_BASE+0x28));
/* Pullup /WR */
gpio_set_value(par->gpio.wr, 1);
set = 0;
reset = 0;
}
return 0;
}
EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched);
#undef GPIOSET
#else
/*
* Optimized use of gpiolib is twice as fast as no optimization
* only one driver can use the optimized version at a time
......@@ -405,5 +237,3 @@ int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len)
return -1;
}
EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched);
#endif /* CONFIG_ARCH_BCM2708 */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment