Commit e60721bf authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label
parents 602079a0 64054eb7
......@@ -1576,7 +1576,7 @@ config GPIO_TPS68470
are "output only" GPIOs.
config GPIO_TQMX86
tristate "TQ-Systems QTMX86 GPIO"
tristate "TQ-Systems TQMx86 GPIO"
depends on MFD_TQMX86 || COMPILE_TEST
depends on HAS_IOPORT_MAP
select GPIOLIB_IRQCHIP
......
......@@ -130,5 +130,6 @@ static struct i2c_driver gw_pld_driver = {
};
module_i2c_driver(gw_pld_driver);
MODULE_DESCRIPTION("Gateworks I2C PLD GPIO expander");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
......@@ -168,5 +168,6 @@ static void __exit mc33880_exit(void)
module_exit(mc33880_exit);
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_DESCRIPTION("MC33880 high-side/low-side switch GPIO driver");
MODULE_LICENSE("GPL v2");
......@@ -438,5 +438,6 @@ static void __exit pcf857x_exit(void)
}
module_exit(pcf857x_exit);
MODULE_DESCRIPTION("Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Brownell");
......@@ -438,4 +438,5 @@ static struct amba_driver pl061_gpio_driver = {
};
module_amba_driver(pl061_gpio_driver);
MODULE_DESCRIPTION("Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)");
MODULE_LICENSE("GPL v2");
......@@ -6,6 +6,7 @@
* Vadim V.Vlasov <vvlasov@dev.rtsoft.ru>
*/
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
......@@ -28,16 +29,25 @@
#define TQMX86_GPIIC 3 /* GPI Interrupt Configuration Register */
#define TQMX86_GPIIS 4 /* GPI Interrupt Status Register */
#define TQMX86_GPII_NONE 0
#define TQMX86_GPII_FALLING BIT(0)
#define TQMX86_GPII_RISING BIT(1)
/* Stored in irq_type as a trigger type, but not actually valid as a register
* value, so the name doesn't use "GPII"
*/
#define TQMX86_INT_BOTH (BIT(0) | BIT(1))
#define TQMX86_GPII_MASK (BIT(0) | BIT(1))
#define TQMX86_GPII_BITS 2
/* Stored in irq_type with GPII bits */
#define TQMX86_INT_UNMASKED BIT(2)
struct tqmx86_gpio_data {
struct gpio_chip chip;
void __iomem *io_base;
int irq;
/* Lock must be held for accessing output and irq_type fields */
raw_spinlock_t spinlock;
DECLARE_BITMAP(output, TQMX86_NGPIO);
u8 irq_type[TQMX86_NGPI];
};
......@@ -64,15 +74,10 @@ static void tqmx86_gpio_set(struct gpio_chip *chip, unsigned int offset,
{
struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
unsigned long flags;
u8 val;
raw_spin_lock_irqsave(&gpio->spinlock, flags);
val = tqmx86_gpio_read(gpio, TQMX86_GPIOD);
if (value)
val |= BIT(offset);
else
val &= ~BIT(offset);
tqmx86_gpio_write(gpio, val, TQMX86_GPIOD);
__assign_bit(offset, gpio->output, value);
tqmx86_gpio_write(gpio, bitmap_get_value8(gpio->output, 0), TQMX86_GPIOD);
raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
}
......@@ -107,21 +112,38 @@ static int tqmx86_gpio_get_direction(struct gpio_chip *chip,
return GPIO_LINE_DIRECTION_OUT;
}
static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int offset)
__must_hold(&gpio->spinlock)
{
u8 type = TQMX86_GPII_NONE, gpiic;
if (gpio->irq_type[offset] & TQMX86_INT_UNMASKED) {
type = gpio->irq_type[offset] & TQMX86_GPII_MASK;
if (type == TQMX86_INT_BOTH)
type = tqmx86_gpio_get(&gpio->chip, offset + TQMX86_NGPO)
? TQMX86_GPII_FALLING
: TQMX86_GPII_RISING;
}
gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
gpiic &= ~(TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS));
gpiic |= type << (offset * TQMX86_GPII_BITS);
tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
}
static void tqmx86_gpio_irq_mask(struct irq_data *data)
{
unsigned int offset = (data->hwirq - TQMX86_NGPO);
struct tqmx86_gpio_data *gpio = gpiochip_get_data(
irq_data_get_irq_chip_data(data));
unsigned long flags;
u8 gpiic, mask;
mask = TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS);
raw_spin_lock_irqsave(&gpio->spinlock, flags);
gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
gpiic &= ~mask;
tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
gpio->irq_type[offset] &= ~TQMX86_INT_UNMASKED;
tqmx86_gpio_irq_config(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
gpiochip_disable_irq(&gpio->chip, irqd_to_hwirq(data));
}
......@@ -131,16 +153,12 @@ static void tqmx86_gpio_irq_unmask(struct irq_data *data)
struct tqmx86_gpio_data *gpio = gpiochip_get_data(
irq_data_get_irq_chip_data(data));
unsigned long flags;
u8 gpiic, mask;
mask = TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS);
gpiochip_enable_irq(&gpio->chip, irqd_to_hwirq(data));
raw_spin_lock_irqsave(&gpio->spinlock, flags);
gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
gpiic &= ~mask;
gpiic |= gpio->irq_type[offset] << (offset * TQMX86_GPII_BITS);
tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
gpio->irq_type[offset] |= TQMX86_INT_UNMASKED;
tqmx86_gpio_irq_config(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
}
......@@ -151,7 +169,7 @@ static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type)
unsigned int offset = (data->hwirq - TQMX86_NGPO);
unsigned int edge_type = type & IRQF_TRIGGER_MASK;
unsigned long flags;
u8 new_type, gpiic;
u8 new_type;
switch (edge_type) {
case IRQ_TYPE_EDGE_RISING:
......@@ -161,19 +179,16 @@ static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type)
new_type = TQMX86_GPII_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
new_type = TQMX86_GPII_FALLING | TQMX86_GPII_RISING;
new_type = TQMX86_INT_BOTH;
break;
default:
return -EINVAL; /* not supported */
}
gpio->irq_type[offset] = new_type;
raw_spin_lock_irqsave(&gpio->spinlock, flags);
gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
gpiic &= ~((TQMX86_GPII_MASK) << (offset * TQMX86_GPII_BITS));
gpiic |= new_type << (offset * TQMX86_GPII_BITS);
tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
gpio->irq_type[offset] &= ~TQMX86_GPII_MASK;
gpio->irq_type[offset] |= new_type;
tqmx86_gpio_irq_config(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
return 0;
......@@ -184,8 +199,8 @@ static void tqmx86_gpio_irq_handler(struct irq_desc *desc)
struct gpio_chip *chip = irq_desc_get_handler_data(desc);
struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
unsigned long irq_bits;
int i = 0;
unsigned long irq_bits, flags;
int i;
u8 irq_status;
chained_irq_enter(irq_chip, desc);
......@@ -194,6 +209,34 @@ static void tqmx86_gpio_irq_handler(struct irq_desc *desc)
tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS);
irq_bits = irq_status;
raw_spin_lock_irqsave(&gpio->spinlock, flags);
for_each_set_bit(i, &irq_bits, TQMX86_NGPI) {
/*
* Edge-both triggers are implemented by flipping the edge
* trigger after each interrupt, as the controller only supports
* either rising or falling edge triggers, but not both.
*
* Internally, the TQMx86 GPIO controller has separate status
* registers for rising and falling edge interrupts. GPIIC
* configures which bits from which register are visible in the
* interrupt status register GPIIS and defines what triggers the
* parent IRQ line. Writing to GPIIS always clears both rising
* and falling interrupt flags internally, regardless of the
* currently configured trigger.
*
* In consequence, we can cleanly implement the edge-both
* trigger in software by first clearing the interrupt and then
* setting the new trigger based on the current GPIO input in
* tqmx86_gpio_irq_config() - even if an edge arrives between
* reading the input and setting the trigger, we will have a new
* interrupt pending.
*/
if ((gpio->irq_type[i] & TQMX86_GPII_MASK) == TQMX86_INT_BOTH)
tqmx86_gpio_irq_config(gpio, i);
}
raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
for_each_set_bit(i, &irq_bits, TQMX86_NGPI)
generic_handle_domain_irq(gpio->chip.irq.domain,
i + TQMX86_NGPO);
......@@ -277,6 +320,13 @@ static int tqmx86_gpio_probe(struct platform_device *pdev)
tqmx86_gpio_write(gpio, (u8)~TQMX86_DIR_INPUT_MASK, TQMX86_GPIODD);
/*
* Reading the previous output state is not possible with TQMx86 hardware.
* Initialize all outputs to 0 to have a defined state that matches the
* shadow register.
*/
tqmx86_gpio_write(gpio, 0, TQMX86_GPIOD);
chip = &gpio->chip;
chip->label = "gpio-tqmx86";
chip->owner = THIS_MODULE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment