Commit e72cce53 authored by Madhav Chauhan's avatar Madhav Chauhan Committed by Jani Nikula

drm/i915/icl: Program DSI clock and data lane timing params

This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.

v2: Use newly defined bitfields for data and clock lane

v3 by Jani:
 - Rebase on dphy abstraction
 - Reduce local variables
 - Remove unrelated comment changes (Ville)
 - Use the same style for range checks as VLV (Ville)
 - Assign, don't OR dphy_reg contents
Signed-off-by: default avatarMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com
parent b687c198
......@@ -291,6 +291,24 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
tmp |= intel_dsi->init_count;
I915_WRITE(ICL_DSI_T_INIT_MASTER(port), tmp);
}
/* Program DPHY clock lanes timings */
for_each_dsi_port(port, intel_dsi->ports) {
I915_WRITE(DPHY_CLK_TIMING_PARAM(port), intel_dsi->dphy_reg);
/* shadow register inside display core */
I915_WRITE(DSI_CLK_TIMING_PARAM(port), intel_dsi->dphy_reg);
}
/* Program DPHY data lanes timings */
for_each_dsi_port(port, intel_dsi->ports) {
I915_WRITE(DPHY_DATA_TIMING_PARAM(port),
intel_dsi->dphy_data_lane_reg);
/* shadow register inside display core */
I915_WRITE(DSI_DATA_TIMING_PARAM(port),
intel_dsi->dphy_data_lane_reg);
}
}
static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
......
......@@ -85,6 +85,9 @@ struct intel_dsi {
u32 port_bits;
u32 bw_timer;
u32 dphy_reg;
/* data lanes dphy timing */
u32 dphy_data_lane_reg;
u32 video_frmt_cfg_bits;
u16 lp_byte_clk;
......
......@@ -510,6 +510,111 @@ int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi)
return 1;
}
#define ICL_PREPARE_CNT_MAX 0x7
#define ICL_CLK_ZERO_CNT_MAX 0xf
#define ICL_TRAIL_CNT_MAX 0x7
#define ICL_TCLK_PRE_CNT_MAX 0x3
#define ICL_TCLK_POST_CNT_MAX 0x7
#define ICL_HS_ZERO_CNT_MAX 0xf
#define ICL_EXIT_ZERO_CNT_MAX 0x7
static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
u32 tlpx_ns;
u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
u32 ths_prepare_ns, tclk_trail_ns;
u32 hs_zero_cnt;
u32 tclk_pre_cnt, tclk_post_cnt;
tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
ths_prepare_ns = max(mipi_config->ths_prepare,
mipi_config->tclk_prepare);
/*
* prepare cnt in escape clocks
* this field represents a hexadecimal value with a precision
* of 1.2 – i.e. the most significant bit is the integer
* and the least significant 2 bits are fraction bits.
* so, the field can represent a range of 0.25 to 1.75
*/
prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
prepare_cnt = ICL_PREPARE_CNT_MAX;
}
/* clk zero count in escape clocks */
clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
ths_prepare_ns, tlpx_ns);
if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
}
/* trail cnt in escape clocks*/
trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
if (trail_cnt > ICL_TRAIL_CNT_MAX) {
DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
trail_cnt = ICL_TRAIL_CNT_MAX;
}
/* tclk pre count in escape clocks */
tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
}
/* tclk post count in escape clocks */
tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt);
tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
}
/* hs zero cnt in escape clocks */
hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
ths_prepare_ns, tlpx_ns);
if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
}
/* hs exit zero cnt in escape clocks */
exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt);
exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
}
/* clock lane dphy timings */
intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
CLK_PREPARE(prepare_cnt) |
CLK_ZERO_OVERRIDE |
CLK_ZERO(clk_zero_cnt) |
CLK_PRE_OVERRIDE |
CLK_PRE(tclk_pre_cnt) |
CLK_POST_OVERRIDE |
CLK_POST(tclk_post_cnt) |
CLK_TRAIL_OVERRIDE |
CLK_TRAIL(trail_cnt));
/* data lanes dphy timings */
intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
HS_PREPARE(prepare_cnt) |
HS_ZERO_OVERRIDE |
HS_ZERO(hs_zero_cnt) |
HS_TRAIL_OVERRIDE |
HS_TRAIL(trail_cnt) |
HS_EXIT_OVERRIDE |
HS_EXIT(exit_zero_cnt));
}
static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
......@@ -743,7 +848,10 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
intel_dsi->burst_mode_ratio = burst_mode_ratio;
vlv_dphy_param_init(intel_dsi);
if (IS_ICELAKE(dev_priv))
icl_dphy_param_init(intel_dsi);
else
vlv_dphy_param_init(intel_dsi);
DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment