Commit e740522e authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Use *_UNKNOWN ethtool definitions

This patch replaces tg3's private SPEED_INVALID and DUPLEX_INVALID
definitions with SPEED_UNKNOWN and DUPLEX_UNKNOWN respectively.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c6700ce2
......@@ -1819,8 +1819,8 @@ static void tg3_adjust_link(struct net_device *dev)
(6 << TX_LENGTHS_IPG_SHIFT) |
(32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
if ((phydev->link && tp->link_config.active_speed == SPEED_INVALID) ||
(!phydev->link && tp->link_config.active_speed != SPEED_INVALID) ||
if ((phydev->link && tp->link_config.active_speed == SPEED_UNKNOWN) ||
(!phydev->link && tp->link_config.active_speed != SPEED_UNKNOWN) ||
phydev->speed != tp->link_config.active_speed ||
phydev->duplex != tp->link_config.active_duplex ||
oldflowctrl != tp->link_config.active_flowctrl)
......@@ -3813,8 +3813,8 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
DUPLEX_HALF;
break;
}
*speed = SPEED_INVALID;
*duplex = DUPLEX_INVALID;
*speed = SPEED_UNKNOWN;
*duplex = DUPLEX_UNKNOWN;
break;
}
}
......@@ -3906,7 +3906,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tg3_phy_autoneg_cfg(tp, new_adv,
FLOW_CTRL_TX | FLOW_CTRL_RX);
} else if (tp->link_config.speed == SPEED_INVALID) {
} else if (tp->link_config.speed == SPEED_UNKNOWN) {
if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
tp->link_config.advertising &=
~(ADVERTISED_1000baseT_Half |
......@@ -3938,7 +3938,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
}
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
tp->link_config.speed != SPEED_INVALID) {
tp->link_config.speed != SPEED_UNKNOWN) {
u32 bmcr, orig_bmcr;
tp->link_config.active_speed = tp->link_config.speed;
......@@ -4172,8 +4172,8 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
}
current_link_up = 0;
current_speed = SPEED_INVALID;
current_duplex = DUPLEX_INVALID;
current_speed = SPEED_UNKNOWN;
current_duplex = DUPLEX_UNKNOWN;
tp->phy_flags &= ~TG3_PHYFLG_MDIX_STATE;
tp->link_config.rmt_adv = 0;
......@@ -5069,8 +5069,8 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
LED_CTRL_LNKLED_OVERRIDE |
LED_CTRL_1000MBPS_ON));
} else {
tp->link_config.active_speed = SPEED_INVALID;
tp->link_config.active_duplex = DUPLEX_INVALID;
tp->link_config.active_speed = SPEED_UNKNOWN;
tp->link_config.active_duplex = DUPLEX_UNKNOWN;
tw32(MAC_LED_CTRL, (tp->led_ctrl |
LED_CTRL_LNKLED_OVERRIDE |
LED_CTRL_TRAFFIC_OVERRIDE));
......@@ -5118,8 +5118,8 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
tg3_phy_reset(tp);
current_link_up = 0;
current_speed = SPEED_INVALID;
current_duplex = DUPLEX_INVALID;
current_speed = SPEED_UNKNOWN;
current_duplex = DUPLEX_UNKNOWN;
tp->link_config.rmt_adv = 0;
err |= tg3_readphy(tp, MII_BMSR, &bmsr);
......@@ -10515,8 +10515,8 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->eth_tp_mdix = ETH_TP_MDI;
}
} else {
ethtool_cmd_speed_set(cmd, SPEED_INVALID);
cmd->duplex = DUPLEX_INVALID;
ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
cmd->duplex = DUPLEX_UNKNOWN;
cmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
}
cmd->phy_address = tp->phy_addr;
......@@ -10598,8 +10598,8 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (cmd->autoneg == AUTONEG_ENABLE) {
tp->link_config.advertising = (cmd->advertising |
ADVERTISED_Autoneg);
tp->link_config.speed = SPEED_INVALID;
tp->link_config.duplex = DUPLEX_INVALID;
tp->link_config.speed = SPEED_UNKNOWN;
tp->link_config.duplex = DUPLEX_UNKNOWN;
} else {
tp->link_config.advertising = 0;
tp->link_config.speed = speed;
......@@ -13347,11 +13347,11 @@ static void __devinit tg3_phy_init_link_config(struct tg3 *tp)
adv |= ADVERTISED_FIBRE;
tp->link_config.advertising = adv;
tp->link_config.speed = SPEED_INVALID;
tp->link_config.duplex = DUPLEX_INVALID;
tp->link_config.speed = SPEED_UNKNOWN;
tp->link_config.duplex = DUPLEX_UNKNOWN;
tp->link_config.autoneg = AUTONEG_ENABLE;
tp->link_config.active_speed = SPEED_INVALID;
tp->link_config.active_duplex = DUPLEX_INVALID;
tp->link_config.active_speed = SPEED_UNKNOWN;
tp->link_config.active_duplex = DUPLEX_UNKNOWN;
}
static int __devinit tg3_phy_probe(struct tg3 *tp)
......
......@@ -2702,9 +2702,6 @@ struct tg3_link_config {
u8 active_flowctrl;
u8 active_duplex;
#define SPEED_INVALID 0xffff
#define DUPLEX_INVALID 0xff
#define AUTONEG_INVALID 0xff
u16 active_speed;
u32 rmt_adv;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment