arm64: dts: colibri-imx8x: Add colibri pwm b, c, d

Add Colibri PWM_B, PWM_C, PWM_D to the module-level device-tree and set
the status to ok on the eval-board.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi

@@ -51,6 +51,21 @@ &lpuart2 {
 	status = "okay";
 };
 
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
 /* Colibri UART_A */
 &lpuart3 {
 	status = "okay";

arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi

@@ -259,6 +259,27 @@ &lsio_gpio5 {
 			  "UNUSABLE_SODIMM_184";
 };
 
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_b>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_c>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_d>;
+	pinctrl-names = "default";
+};
+
 /* On-module eMMC */
 &usdhc1 {
 	bus-width = <8>;