Commit e76f4750 authored by Russell King's avatar Russell King

ARM: debug: arrange Kconfig options more logically

Arrange the Kconfig options in rough alphabetical order, and place the
default 'none' and 'icedcc' options at the end.  This prefers the
platform specific debug option rather than the 'none' option, which is
what we actually want.
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent dcd6c922
......@@ -81,25 +81,6 @@ choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
......@@ -108,20 +89,6 @@ choice
bool "Kernel low-level debugging on 9263, 9g45 and cap9"
depends on HAVE_AT91_DBGU1
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
......@@ -136,6 +103,20 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
......@@ -206,38 +187,42 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
their output to the first serial port on MSM devices.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
their output to the second serial port on MSM devices.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
their output to the serial port on MSM 8660 devices.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
......@@ -255,42 +240,57 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
their output to UART 0. The port must have been initialised
by the boot-loader before use.
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
their output to UART 1. The port must have been initialised
by the boot-loader before use.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
their output to UART 2. The port must have been initialised
by the boot-loader before use.
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
endchoice
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment