Commit e790c3cb authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

[media] v4l: vsp1: Store active formats in a pad config structure

Add a pad config structure field to the vsp1_entity structure and use it
to store all active pad formats. This generalizes the code to operate on
pad config structures.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 0efdf0f5
......@@ -70,7 +70,8 @@ static int bru_s_stream(struct v4l2_subdev *subdev, int enable)
if (!enable)
return 0;
format = &bru->entity.formats[bru->entity.source_pad];
format = vsp1_entity_get_pad_format(&bru->entity, bru->entity.config,
bru->entity.source_pad);
/* The hardware is extremely flexible but we have no userspace API to
* expose all the parameters, nor is it clear whether we would have use
......@@ -183,7 +184,6 @@ static int bru_enum_mbus_code(struct v4l2_subdev *subdev,
MEDIA_BUS_FMT_AYUV8_1X32,
};
struct vsp1_bru *bru = to_bru(subdev);
struct v4l2_mbus_framefmt *format;
if (code->pad == BRU_PAD_SINK(0)) {
if (code->index >= ARRAY_SIZE(codes))
......@@ -191,12 +191,19 @@ static int bru_enum_mbus_code(struct v4l2_subdev *subdev,
code->code = codes[code->index];
} else {
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
if (code->index)
return -EINVAL;
format = vsp1_entity_get_pad_format(&bru->entity, cfg,
BRU_PAD_SINK(0),
config = vsp1_entity_get_pad_config(&bru->entity, cfg,
code->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&bru->entity, config,
BRU_PAD_SINK(0));
code->code = format->code;
}
......@@ -242,17 +249,21 @@ static int bru_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_bru *bru = to_bru(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&bru->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&bru->entity, cfg, fmt->pad,
fmt->which);
fmt->format = *vsp1_entity_get_pad_format(&bru->entity, config,
fmt->pad);
return 0;
}
static void bru_try_format(struct vsp1_bru *bru,
struct v4l2_subdev_pad_config *cfg,
unsigned int pad, struct v4l2_mbus_framefmt *fmt,
enum v4l2_subdev_format_whence which)
struct v4l2_subdev_pad_config *config,
unsigned int pad, struct v4l2_mbus_framefmt *fmt)
{
struct v4l2_mbus_framefmt *format;
......@@ -266,8 +277,8 @@ static void bru_try_format(struct vsp1_bru *bru,
default:
/* The BRU can't perform format conversion. */
format = vsp1_entity_get_pad_format(&bru->entity, cfg,
BRU_PAD_SINK(0), which);
format = vsp1_entity_get_pad_format(&bru->entity, config,
BRU_PAD_SINK(0));
fmt->code = format->code;
break;
}
......@@ -283,12 +294,16 @@ static int bru_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_bru *bru = to_bru(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
bru_try_format(bru, cfg, fmt->pad, &fmt->format, fmt->which);
config = vsp1_entity_get_pad_config(&bru->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
bru_try_format(bru, config, fmt->pad, &fmt->format);
format = vsp1_entity_get_pad_format(&bru->entity, cfg, fmt->pad,
fmt->which);
format = vsp1_entity_get_pad_format(&bru->entity, config, fmt->pad);
*format = fmt->format;
/* Reset the compose rectangle */
......@@ -307,8 +322,8 @@ static int bru_set_format(struct v4l2_subdev *subdev,
unsigned int i;
for (i = 0; i <= bru->entity.source_pad; ++i) {
format = vsp1_entity_get_pad_format(&bru->entity, cfg,
i, fmt->which);
format = vsp1_entity_get_pad_format(&bru->entity,
config, i);
format->code = fmt->format.code;
}
}
......@@ -347,6 +362,7 @@ static int bru_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_bru *bru = to_bru(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *compose;
......@@ -356,19 +372,22 @@ static int bru_set_selection(struct v4l2_subdev *subdev,
if (sel->target != V4L2_SEL_TGT_COMPOSE)
return -EINVAL;
config = vsp1_entity_get_pad_config(&bru->entity, cfg, sel->which);
if (!config)
return -EINVAL;
/* The compose rectangle top left corner must be inside the output
* frame.
*/
format = vsp1_entity_get_pad_format(&bru->entity, cfg,
bru->entity.source_pad, sel->which);
format = vsp1_entity_get_pad_format(&bru->entity, config,
bru->entity.source_pad);
sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
/* Scaling isn't supported, the compose rectangle size must be identical
* to the sink format size.
*/
format = vsp1_entity_get_pad_format(&bru->entity, cfg, sel->pad,
sel->which);
format = vsp1_entity_get_pad_format(&bru->entity, config, sel->pad);
sel->r.width = format->width;
sel->r.height = format->height;
......
......@@ -46,21 +46,48 @@ void vsp1_entity_route_setup(struct vsp1_entity *source)
* V4L2 Subdevice Operations
*/
struct v4l2_mbus_framefmt *
vsp1_entity_get_pad_format(struct vsp1_entity *entity,
/**
* vsp1_entity_get_pad_config - Get the pad configuration for an entity
* @entity: the entity
* @cfg: the TRY pad configuration
* @which: configuration selector (ACTIVE or TRY)
*
* Return the pad configuration requested by the which argument. The TRY
* configuration is passed explicitly to the function through the cfg argument
* and simply returned when requested. The ACTIVE configuration comes from the
* entity structure.
*/
struct v4l2_subdev_pad_config *
vsp1_entity_get_pad_config(struct vsp1_entity *entity,
struct v4l2_subdev_pad_config *cfg,
unsigned int pad, u32 which)
enum v4l2_subdev_format_whence which)
{
switch (which) {
case V4L2_SUBDEV_FORMAT_TRY:
return v4l2_subdev_get_try_format(&entity->subdev, cfg, pad);
case V4L2_SUBDEV_FORMAT_ACTIVE:
return &entity->formats[pad];
return entity->config;
case V4L2_SUBDEV_FORMAT_TRY:
default:
return NULL;
return cfg;
}
}
/**
* vsp1_entity_get_pad_format - Get a pad format from storage for an entity
* @entity: the entity
* @cfg: the configuration storage
* @pad: the pad number
*
* Return the format stored in the given configuration for an entity's pad. The
* configuration can be an ACTIVE or TRY configuration.
*/
struct v4l2_mbus_framefmt *
vsp1_entity_get_pad_format(struct vsp1_entity *entity,
struct v4l2_subdev_pad_config *cfg,
unsigned int pad)
{
return v4l2_subdev_get_try_format(&entity->subdev, cfg, pad);
}
/*
* vsp1_entity_init_cfg - Initialize formats on all pads
* @subdev: V4L2 subdevice
......@@ -169,19 +196,12 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
entity->vsp1 = vsp1;
entity->source_pad = num_pads - 1;
/* Allocate formats and pads. */
entity->formats = devm_kzalloc(vsp1->dev,
num_pads * sizeof(*entity->formats),
GFP_KERNEL);
if (entity->formats == NULL)
return -ENOMEM;
/* Allocate and initialize pads. */
entity->pads = devm_kzalloc(vsp1->dev, num_pads * sizeof(*entity->pads),
GFP_KERNEL);
if (entity->pads == NULL)
return -ENOMEM;
/* Initialize pads. */
for (i = 0; i < num_pads - 1; ++i)
entity->pads[i].flags = MEDIA_PAD_FL_SINK;
......@@ -205,6 +225,15 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
vsp1_entity_init_cfg(subdev, NULL);
/* Allocate the pad configuration to store formats and selection
* rectangles.
*/
entity->config = v4l2_subdev_alloc_pad_config(&entity->subdev);
if (entity->config == NULL) {
media_entity_cleanup(&entity->subdev.entity);
return -ENOMEM;
}
return 0;
}
......@@ -214,5 +243,6 @@ void vsp1_entity_destroy(struct vsp1_entity *entity)
entity->ops->destroy(entity);
if (entity->subdev.ctrl_handler)
v4l2_ctrl_handler_free(entity->subdev.ctrl_handler);
v4l2_subdev_free_pad_config(entity->config);
media_entity_cleanup(&entity->subdev.entity);
}
......@@ -84,7 +84,7 @@ struct vsp1_entity {
unsigned int sink_pad;
struct v4l2_subdev subdev;
struct v4l2_mbus_framefmt *formats;
struct v4l2_subdev_pad_config *config;
};
static inline struct vsp1_entity *to_vsp1_entity(struct v4l2_subdev *subdev)
......@@ -103,10 +103,14 @@ int vsp1_entity_link_setup(struct media_entity *entity,
const struct media_pad *local,
const struct media_pad *remote, u32 flags);
struct v4l2_subdev_pad_config *
vsp1_entity_get_pad_config(struct vsp1_entity *entity,
struct v4l2_subdev_pad_config *cfg,
enum v4l2_subdev_format_whence which);
struct v4l2_mbus_framefmt *
vsp1_entity_get_pad_format(struct vsp1_entity *entity,
struct v4l2_subdev_pad_config *cfg,
unsigned int pad, u32 which);
unsigned int pad);
int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg);
......
......@@ -77,10 +77,14 @@ static int hsit_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_hsit *hsit = to_hsit(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&hsit->entity, cfg, fse->pad,
fse->which);
config = vsp1_entity_get_pad_config(&hsit->entity, cfg, fse->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&hsit->entity, config, fse->pad);
if (fse->index || fse->code != format->code)
return -EINVAL;
......@@ -108,9 +112,14 @@ static int hsit_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_hsit *hsit = to_hsit(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&hsit->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&hsit->entity, cfg, fmt->pad,
fmt->which);
fmt->format = *vsp1_entity_get_pad_format(&hsit->entity, config,
fmt->pad);
return 0;
}
......@@ -120,10 +129,14 @@ static int hsit_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_hsit *hsit = to_hsit(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&hsit->entity, cfg, fmt->pad,
fmt->which);
config = vsp1_entity_get_pad_config(&hsit->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&hsit->entity, config, fmt->pad);
if (fmt->pad == HSIT_PAD_SOURCE) {
/* The HST and HSI output format code and resolution can't be
......@@ -145,8 +158,8 @@ static int hsit_set_format(struct v4l2_subdev *subdev,
fmt->format = *format;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&hsit->entity, cfg, HSIT_PAD_SOURCE,
fmt->which);
format = vsp1_entity_get_pad_format(&hsit->entity, config,
HSIT_PAD_SOURCE);
*format = fmt->format;
format->code = hsit->inverse ? MEDIA_BUS_FMT_ARGB8888_1X32
: MEDIA_BUS_FMT_AHSV8888_1X32;
......
......@@ -48,7 +48,8 @@ static int lif_s_stream(struct v4l2_subdev *subdev, int enable)
return 0;
}
format = &lif->entity.formats[LIF_PAD_SOURCE];
format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config,
LIF_PAD_SOURCE);
obth = min(obth, (format->width + 1) / 2 * format->height - 4);
......@@ -84,6 +85,7 @@ static int lif_enum_mbus_code(struct v4l2_subdev *subdev,
code->code = codes[code->index];
} else {
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
/* The LIF can't perform format conversion, the sink format is
......@@ -92,8 +94,13 @@ static int lif_enum_mbus_code(struct v4l2_subdev *subdev,
if (code->index)
return -EINVAL;
format = vsp1_entity_get_pad_format(&lif->entity, cfg,
LIF_PAD_SINK, code->which);
config = vsp1_entity_get_pad_config(&lif->entity, cfg,
code->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&lif->entity, config,
LIF_PAD_SINK);
code->code = format->code;
}
......@@ -105,10 +112,14 @@ static int lif_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_lif *lif = to_lif(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&lif->entity, cfg, LIF_PAD_SINK,
fse->which);
config = vsp1_entity_get_pad_config(&lif->entity, cfg, fse->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&lif->entity, config, LIF_PAD_SINK);
if (fse->index || fse->code != format->code)
return -EINVAL;
......@@ -133,9 +144,14 @@ static int lif_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lif *lif = to_lif(subdev);
struct v4l2_subdev_pad_config *config;
fmt->format = *vsp1_entity_get_pad_format(&lif->entity, cfg, fmt->pad,
fmt->which);
config = vsp1_entity_get_pad_config(&lif->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&lif->entity, config,
fmt->pad);
return 0;
}
......@@ -145,15 +161,19 @@ static int lif_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lif *lif = to_lif(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
config = vsp1_entity_get_pad_config(&lif->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
/* Default to YUV if the requested format is not supported. */
if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
format = vsp1_entity_get_pad_format(&lif->entity, cfg, fmt->pad,
fmt->which);
format = vsp1_entity_get_pad_format(&lif->entity, config, fmt->pad);
if (fmt->pad == LIF_PAD_SOURCE) {
/* The LIF source format is always identical to its sink
......@@ -174,8 +194,8 @@ static int lif_set_format(struct v4l2_subdev *subdev,
fmt->format = *format;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&lif->entity, cfg, LIF_PAD_SOURCE,
fmt->which);
format = vsp1_entity_get_pad_format(&lif->entity, config,
LIF_PAD_SOURCE);
*format = fmt->format;
return 0;
......
......@@ -86,7 +86,6 @@ static int lut_enum_mbus_code(struct v4l2_subdev *subdev,
MEDIA_BUS_FMT_AYUV8_1X32,
};
struct vsp1_lut *lut = to_lut(subdev);
struct v4l2_mbus_framefmt *format;
if (code->pad == LUT_PAD_SINK) {
if (code->index >= ARRAY_SIZE(codes))
......@@ -94,14 +93,22 @@ static int lut_enum_mbus_code(struct v4l2_subdev *subdev,
code->code = codes[code->index];
} else {
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
/* The LUT can't perform format conversion, the sink format is
* always identical to the source format.
*/
if (code->index)
return -EINVAL;
format = vsp1_entity_get_pad_format(&lut->entity, cfg,
LUT_PAD_SINK, code->which);
config = vsp1_entity_get_pad_config(&lut->entity, cfg,
code->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&lut->entity, config,
LUT_PAD_SINK);
code->code = format->code;
}
......@@ -113,10 +120,14 @@ static int lut_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_lut *lut = to_lut(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&lut->entity, cfg,
fse->pad, fse->which);
config = vsp1_entity_get_pad_config(&lut->entity, cfg, fse->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&lut->entity, config, fse->pad);
if (fse->index || fse->code != format->code)
return -EINVAL;
......@@ -144,9 +155,14 @@ static int lut_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lut *lut = to_lut(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&lut->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&lut->entity, cfg, fmt->pad,
fmt->which);
fmt->format = *vsp1_entity_get_pad_format(&lut->entity, config,
fmt->pad);
return 0;
}
......@@ -156,16 +172,20 @@ static int lut_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lut *lut = to_lut(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
config = vsp1_entity_get_pad_config(&lut->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
/* Default to YUV if the requested format is not supported. */
if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
fmt->format.code != MEDIA_BUS_FMT_AHSV8888_1X32 &&
fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
format = vsp1_entity_get_pad_format(&lut->entity, cfg, fmt->pad,
fmt->which);
format = vsp1_entity_get_pad_format(&lut->entity, config, fmt->pad);
if (fmt->pad == LUT_PAD_SOURCE) {
/* The LUT output format can't be modified. */
......@@ -183,8 +203,8 @@ static int lut_set_format(struct v4l2_subdev *subdev,
fmt->format = *format;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&lut->entity, cfg, LUT_PAD_SOURCE,
fmt->which);
format = vsp1_entity_get_pad_format(&lut->entity, config,
LUT_PAD_SOURCE);
*format = fmt->format;
return 0;
......
......@@ -42,6 +42,8 @@ static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
struct vsp1_rwpf *rpf = to_rwpf(subdev);
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->format;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
const struct v4l2_rect *crop = &rpf->crop;
u32 pstride;
u32 infmt;
......@@ -79,6 +81,13 @@ static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
vsp1_rpf_write(rpf, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
sink_format = vsp1_entity_get_pad_format(&rpf->entity,
rpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&rpf->entity,
rpf->entity.config,
RWPF_PAD_SOURCE);
infmt = VI6_RPF_INFMT_CIPM
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
......@@ -87,8 +96,7 @@ static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
if (fmtinfo->swap_uv)
infmt |= VI6_RPF_INFMT_SPUVS;
if (rpf->entity.formats[RWPF_PAD_SINK].code !=
rpf->entity.formats[RWPF_PAD_SOURCE].code)
if (sink_format->code != source_format->code)
infmt |= VI6_RPF_INFMT_CSC;
vsp1_rpf_write(rpf, VI6_RPF_INFMT, infmt);
......
......@@ -46,10 +46,14 @@ int vsp1_rwpf_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, fse->pad,
fse->which);
config = vsp1_entity_get_pad_config(&rwpf->entity, cfg, fse->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&rwpf->entity, config, fse->pad);
if (fse->index || fse->code != format->code)
return -EINVAL;
......@@ -92,9 +96,14 @@ int vsp1_rwpf_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_subdev_pad_config *config;
fmt->format = *vsp1_entity_get_pad_format(&rwpf->entity, cfg, fmt->pad,
fmt->which);
config = vsp1_entity_get_pad_config(&rwpf->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&rwpf->entity, config,
fmt->pad);
return 0;
}
......@@ -104,16 +113,20 @@ int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
config = vsp1_entity_get_pad_config(&rwpf->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
/* Default to YUV if the requested format is not supported. */
if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, fmt->pad,
fmt->which);
format = vsp1_entity_get_pad_format(&rwpf->entity, config, fmt->pad);
if (fmt->pad == RWPF_PAD_SOURCE) {
/* The RWPF performs format conversion but can't scale, only the
......@@ -142,8 +155,8 @@ int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
crop->height = fmt->format.height;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, RWPF_PAD_SOURCE,
fmt->which);
format = vsp1_entity_get_pad_format(&rwpf->entity, config,
RWPF_PAD_SOURCE);
*format = fmt->format;
return 0;
......@@ -154,20 +167,25 @@ int vsp1_rwpf_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
/* Cropping is implemented on the sink pad. */
if (sel->pad != RWPF_PAD_SINK)
return -EINVAL;
config = vsp1_entity_get_pad_config(&rwpf->entity, cfg, sel->which);
if (!config)
return -EINVAL;
switch (sel->target) {
case V4L2_SEL_TGT_CROP:
sel->r = *vsp1_rwpf_get_crop(rwpf, cfg, sel->which);
break;
case V4L2_SEL_TGT_CROP_BOUNDS:
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg,
RWPF_PAD_SINK, sel->which);
format = vsp1_entity_get_pad_format(&rwpf->entity, config,
RWPF_PAD_SINK);
sel->r.left = 0;
sel->r.top = 0;
sel->r.width = format->width;
......@@ -186,6 +204,7 @@ int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
......@@ -196,11 +215,15 @@ int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
config = vsp1_entity_get_pad_config(&rwpf->entity, cfg, sel->which);
if (!config)
return -EINVAL;
/* Make sure the crop rectangle is entirely contained in the image. The
* WPF top and left offsets are limited to 255.
*/
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, RWPF_PAD_SINK,
sel->which);
format = vsp1_entity_get_pad_format(&rwpf->entity, config,
RWPF_PAD_SINK);
/* Restrict the crop rectangle coordinates to multiples of 2 to avoid
* shifting the color plane.
......@@ -227,8 +250,8 @@ int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
*crop = sel->r;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, RWPF_PAD_SOURCE,
sel->which);
format = vsp1_entity_get_pad_format(&rwpf->entity, config,
RWPF_PAD_SOURCE);
format->width = crop->width;
format->height = crop->height;
......
......@@ -117,8 +117,10 @@ static int sru_s_stream(struct v4l2_subdev *subdev, int enable)
if (!enable)
return 0;
input = &sru->entity.formats[SRU_PAD_SINK];
output = &sru->entity.formats[SRU_PAD_SOURCE];
input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
SRU_PAD_SINK);
output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
SRU_PAD_SOURCE);
if (input->code == MEDIA_BUS_FMT_ARGB8888_1X32)
ctrl0 = VI6_SRU_CTRL0_PARAM2 | VI6_SRU_CTRL0_PARAM3
......@@ -153,7 +155,6 @@ static int sru_enum_mbus_code(struct v4l2_subdev *subdev,
MEDIA_BUS_FMT_AYUV8_1X32,
};
struct vsp1_sru *sru = to_sru(subdev);
struct v4l2_mbus_framefmt *format;
if (code->pad == SRU_PAD_SINK) {
if (code->index >= ARRAY_SIZE(codes))
......@@ -161,14 +162,22 @@ static int sru_enum_mbus_code(struct v4l2_subdev *subdev,
code->code = codes[code->index];
} else {
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
/* The SRU can't perform format conversion, the sink format is
* always identical to the source format.
*/
if (code->index)
return -EINVAL;
format = vsp1_entity_get_pad_format(&sru->entity, cfg,
SRU_PAD_SINK, code->which);
config = vsp1_entity_get_pad_config(&sru->entity, cfg,
code->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&sru->entity, config,
SRU_PAD_SINK);
code->code = format->code;
}
......@@ -180,10 +189,14 @@ static int sru_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_sru *sru = to_sru(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&sru->entity, cfg,
SRU_PAD_SINK, fse->which);
config = vsp1_entity_get_pad_config(&sru->entity, cfg, fse->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&sru->entity, config, SRU_PAD_SINK);
if (fse->index || fse->code != format->code)
return -EINVAL;
......@@ -214,17 +227,21 @@ static int sru_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_sru *sru = to_sru(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&sru->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&sru->entity, cfg, fmt->pad,
fmt->which);
fmt->format = *vsp1_entity_get_pad_format(&sru->entity, config,
fmt->pad);
return 0;
}
static void sru_try_format(struct vsp1_sru *sru,
struct v4l2_subdev_pad_config *cfg,
unsigned int pad, struct v4l2_mbus_framefmt *fmt,
enum v4l2_subdev_format_whence which)
struct v4l2_subdev_pad_config *config,
unsigned int pad, struct v4l2_mbus_framefmt *fmt)
{
struct v4l2_mbus_framefmt *format;
unsigned int input_area;
......@@ -243,8 +260,8 @@ static void sru_try_format(struct vsp1_sru *sru,
case SRU_PAD_SOURCE:
/* The SRU can't perform format conversion. */
format = vsp1_entity_get_pad_format(&sru->entity, cfg,
SRU_PAD_SINK, which);
format = vsp1_entity_get_pad_format(&sru->entity, config,
SRU_PAD_SINK);
fmt->code = format->code;
/* We can upscale by 2 in both direction, but not independently.
......@@ -278,21 +295,25 @@ static int sru_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_sru *sru = to_sru(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
sru_try_format(sru, cfg, fmt->pad, &fmt->format, fmt->which);
config = vsp1_entity_get_pad_config(&sru->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
sru_try_format(sru, config, fmt->pad, &fmt->format);
format = vsp1_entity_get_pad_format(&sru->entity, cfg, fmt->pad,
fmt->which);
format = vsp1_entity_get_pad_format(&sru->entity, config, fmt->pad);
*format = fmt->format;
if (fmt->pad == SRU_PAD_SINK) {
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&sru->entity, cfg,
SRU_PAD_SOURCE, fmt->which);
format = vsp1_entity_get_pad_format(&sru->entity, config,
SRU_PAD_SOURCE);
*format = fmt->format;
sru_try_format(sru, cfg, SRU_PAD_SOURCE, format, fmt->which);
sru_try_format(sru, config, SRU_PAD_SOURCE, format);
}
return 0;
......
......@@ -120,8 +120,10 @@ static int uds_s_stream(struct v4l2_subdev *subdev, int enable)
if (!enable)
return 0;
input = &uds->entity.formats[UDS_PAD_SINK];
output = &uds->entity.formats[UDS_PAD_SOURCE];
input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
UDS_PAD_SINK);
output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
UDS_PAD_SOURCE);
hscale = uds_compute_ratio(input->width, output->width);
vscale = uds_compute_ratio(input->height, output->height);
......@@ -178,16 +180,22 @@ static int uds_enum_mbus_code(struct v4l2_subdev *subdev,
code->code = codes[code->index];
} else {
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
config = vsp1_entity_get_pad_config(&uds->entity, cfg,
code->which);
if (!config)
return -EINVAL;
/* The UDS can't perform format conversion, the sink format is
* always identical to the source format.
*/
if (code->index)
return -EINVAL;
format = vsp1_entity_get_pad_format(&uds->entity, cfg,
UDS_PAD_SINK, code->which);
format = vsp1_entity_get_pad_format(&uds->entity, config,
UDS_PAD_SINK);
code->code = format->code;
}
......@@ -199,10 +207,15 @@ static int uds_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_uds *uds = to_uds(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&uds->entity, cfg,
UDS_PAD_SINK, fse->which);
config = vsp1_entity_get_pad_config(&uds->entity, cfg, fse->which);
if (!config)
return -EINVAL;
format = vsp1_entity_get_pad_format(&uds->entity, config,
UDS_PAD_SINK);
if (fse->index || fse->code != format->code)
return -EINVAL;
......@@ -227,17 +240,21 @@ static int uds_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_uds *uds = to_uds(subdev);
struct v4l2_subdev_pad_config *config;
fmt->format = *vsp1_entity_get_pad_format(&uds->entity, cfg, fmt->pad,
fmt->which);
config = vsp1_entity_get_pad_config(&uds->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&uds->entity, config,
fmt->pad);
return 0;
}
static void uds_try_format(struct vsp1_uds *uds,
struct v4l2_subdev_pad_config *cfg,
unsigned int pad, struct v4l2_mbus_framefmt *fmt,
enum v4l2_subdev_format_whence which)
struct v4l2_subdev_pad_config *config,
unsigned int pad, struct v4l2_mbus_framefmt *fmt)
{
struct v4l2_mbus_framefmt *format;
unsigned int minimum;
......@@ -256,8 +273,8 @@ static void uds_try_format(struct vsp1_uds *uds,
case UDS_PAD_SOURCE:
/* The UDS scales but can't perform format conversion. */
format = vsp1_entity_get_pad_format(&uds->entity, cfg,
UDS_PAD_SINK, which);
format = vsp1_entity_get_pad_format(&uds->entity, config,
UDS_PAD_SINK);
fmt->code = format->code;
uds_output_limits(format->width, &minimum, &maximum);
......@@ -276,21 +293,25 @@ static int uds_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_uds *uds = to_uds(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
uds_try_format(uds, cfg, fmt->pad, &fmt->format, fmt->which);
config = vsp1_entity_get_pad_config(&uds->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
uds_try_format(uds, config, fmt->pad, &fmt->format);
format = vsp1_entity_get_pad_format(&uds->entity, cfg, fmt->pad,
fmt->which);
format = vsp1_entity_get_pad_format(&uds->entity, config, fmt->pad);
*format = fmt->format;
if (fmt->pad == UDS_PAD_SINK) {
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&uds->entity, cfg,
UDS_PAD_SOURCE, fmt->which);
format = vsp1_entity_get_pad_format(&uds->entity, config,
UDS_PAD_SOURCE);
*format = fmt->format;
uds_try_format(uds, cfg, UDS_PAD_SOURCE, format, fmt->which);
uds_try_format(uds, config, UDS_PAD_SOURCE, format);
}
return 0;
......
......@@ -42,6 +42,8 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
struct vsp1_pipeline *pipe = to_vsp1_pipeline(&subdev->entity);
struct vsp1_rwpf *wpf = to_rwpf(subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
const struct v4l2_rect *crop = &wpf->crop;
unsigned int i;
u32 srcrpf = 0;
......@@ -94,6 +96,13 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
(crop->height << VI6_WPF_SZCLIP_SIZE_SHIFT));
/* Format */
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SOURCE);
if (!pipe->lif) {
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
......@@ -109,8 +118,7 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
vsp1_wpf_write(wpf, VI6_WPF_DSWAP, fmtinfo->swap);
}
if (wpf->entity.formats[RWPF_PAD_SINK].code !=
wpf->entity.formats[RWPF_PAD_SOURCE].code)
if (sink_format->code != source_format->code)
outfmt |= VI6_WPF_OUTFMT_CSC;
outfmt |= wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment