ARM: dts: stm32: add pinctrl sleep config for qspi on stm32mp157c-ev1

This patch adds pinctrl sleep config for qspi on stm32mp157c-ev1
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi

@@ -481,6 +481,12 @@ pins {
 				};
 			};
 
+			qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+				};
+			};
+
 			qspi_bk1_pins_a: qspi-bk1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
@@ -499,6 +505,16 @@ pins2 {
 				};
 			};
 
+			qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+						 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+						 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+						 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+						 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+				};
+			};
+
 			qspi_bk2_pins_a: qspi-bk2-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
@@ -517,6 +533,16 @@ pins2 {
 				};
 			};
 
+			qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+						 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+						 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+						 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+						 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+				};
+			};
+
 			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 				pins {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */

arch/arm/boot/dts/stm32mp157c-ev1.dts

@@ -192,8 +192,9 @@ &m_can1 {
 };
 
 &qspi {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;