Commit e7c50688 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Mauro Carvalho Chehab

V4L/DVB (7670): pxa-camera: handle FIFO overruns

FIFO overruns are not seldom on PXA camera interface FIFOs. Handle them by
dropping the corrupted frame, waiting for the next start-of-frame, and
restarting capture.
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent a5462e5b
......@@ -118,6 +118,7 @@ struct pxa_camera_dev {
unsigned int irq;
void __iomem *base;
int channels;
unsigned int dma_chans[3];
struct pxacamera_platform_data *pdata;
......@@ -398,14 +399,10 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
} else {
struct pxa_cam_dma *buf_dma;
struct pxa_cam_dma *act_dma;
int channels = 1;
int nents;
int i;
if (buf->fmt->fourcc == V4L2_PIX_FMT_YUV422P)
channels = 3;
for (i = 0; i < channels; i++) {
for (i = 0; i < pcdev->channels; i++) {
buf_dma = &buf->dmas[i];
act_dma = &active->dmas[i];
nents = buf_dma->sglen;
......@@ -445,20 +442,6 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
}
#ifdef DEBUG
if (CISR & (CISR_IFO_0 | CISR_IFO_1 | CISR_IFO_2)) {
dev_warn(pcdev->dev, "FIFO overrun\n");
for (i = 0; i < channels; i++)
DDADR(pcdev->dma_chans[i]) =
pcdev->active->dmas[i].sg_dma;
CICR0 &= ~CICR0_ENB;
CIFR |= CIFR_RESET_F;
for (i = 0; i < channels; i++)
DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
CICR0 |= CICR0_ENB;
}
#endif
}
spin_unlock_irqrestore(&pcdev->lock, flags);
......@@ -522,7 +505,7 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
{
struct pxa_buffer *buf;
unsigned long flags;
unsigned int status;
u32 status, camera_status, overrun;
struct videobuf_buffer *vb;
spin_lock_irqsave(&pcdev->lock, flags);
......@@ -546,6 +529,25 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
goto out;
}
camera_status = CISR;
overrun = CISR_IFO_0;
if (pcdev->channels == 3)
overrun |= CISR_IFO_1 | CISR_IFO_2;
if (camera_status & overrun) {
dev_dbg(pcdev->dev, "FIFO overrun! CISR: %x\n", camera_status);
/* Stop the Capture Interface */
CICR0 &= ~CICR0_ENB;
/* Stop DMA */
DCSR(channel) = 0;
/* Reset the FIFOs */
CIFR |= CIFR_RESET_F;
/* Enable End-Of-Frame Interrupt */
CICR0 &= ~CICR0_EOFM;
/* Restart the Capture Interface */
CICR0 |= CICR0_ENB;
goto out;
}
vb = &pcdev->active->vb;
buf = container_of(vb, struct pxa_buffer, vb);
WARN_ON(buf->inwork || list_empty(&vb->queue));
......@@ -670,7 +672,21 @@ static irqreturn_t pxa_camera_irq(int irq, void *data)
dev_dbg(pcdev->dev, "Camera interrupt status 0x%x\n", status);
if (!status)
return IRQ_NONE;
CISR = status;
if (status & CISR_EOF) {
int i;
for (i = 0; i < pcdev->channels; i++) {
DDADR(pcdev->dma_chans[i]) =
pcdev->active->dmas[i].sg_dma;
DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
}
CICR0 |= CICR0_EOFM;
}
return IRQ_HANDLED;
}
......@@ -785,6 +801,8 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
if (!common_flags)
return -EINVAL;
pcdev->channels = 1;
/* Make choises, based on platform preferences */
if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
(common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
......@@ -855,6 +873,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
switch (pixfmt) {
case V4L2_PIX_FMT_YUV422P:
pcdev->channels = 3;
cicr1 |= CICR1_YCBCR_F;
case V4L2_PIX_FMT_YUYV:
cicr1 |= CICR1_COLOR_SP_VAL(2);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment