Commit e80541ec authored by Saeed Mahameed's avatar Saeed Mahameed

net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig

Allow to selectively build the driver with or without sriov eswitch, VF
representors and TC offloads.

Also remove the need of two ndo ops structures (sriov & basic)
and keep only one unified ndo ops, compile out VF SRIOV ndos when not
needed (MLX5_ESWITCH=n), and for VF netdev calling those ndos will result
in returning -EPERM.
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
Cc: Jes Sorensen <jsorensen@fb.com>
Cc: kernel-team@fb.com
parent eeb66cdb
......@@ -44,6 +44,17 @@ config MLX5_MPFS
is enabled to allow passing user configured unicast MAC addresses to the
requesting PF.
config MLX5_ESWITCH
bool "Mellanox Technologies MLX5 SRIOV E-Switch support"
depends on MLX5_CORE_EN
default y
---help---
Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC.
E-Switch provides internal SRIOV packet steering and switching for the
enabled VFs and PF in two available modes:
Legacy SRIOV mode (L2 mac vlan steering based).
Switchdev mode (eswitch offloads).
config MLX5_CORE_EN_DCB
bool "Data Center Bridging (DCB) Support"
default y
......
......@@ -11,13 +11,14 @@ mlx5_core-$(CONFIG_MLX5_ACCEL) += accel/ipsec.o
mlx5_core-$(CONFIG_MLX5_FPGA) += fpga/cmd.o fpga/core.o fpga/conn.o fpga/sdk.o \
fpga/ipsec.o
mlx5_core-$(CONFIG_MLX5_CORE_EN) += eswitch.o eswitch_offloads.o \
en_main.o en_common.o en_fs.o en_ethtool.o en_tx.o \
en_rx.o en_rx_am.o en_txrx.o en_clock.o vxlan.o \
en_tc.o en_arfs.o en_rep.o en_fs_ethtool.o en_selftest.o
mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
en_tx.o en_rx.o en_rx_am.o en_txrx.o en_clock.o vxlan.o \
en_arfs.o en_fs_ethtool.o en_selftest.o
mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o en_rep.o en_tc.o
mlx5_core-$(CONFIG_MLX5_CORE_EN_DCB) += en_dcbnl.o
mlx5_core-$(CONFIG_MLX5_CORE_IPOIB) += ipoib/ipoib.o ipoib/ethtool.o
......
......@@ -3025,6 +3025,7 @@ static int mlx5e_ndo_setup_tc(struct net_device *dev, u32 handle,
u32 chain_index, __be16 proto,
struct tc_to_netdev *tc)
{
#ifdef CONFIG_MLX5_ESWITCH
struct mlx5e_priv *priv = netdev_priv(dev);
if (TC_H_MAJ(handle) != TC_H_MAJ(TC_H_INGRESS))
......@@ -3048,6 +3049,7 @@ static int mlx5e_ndo_setup_tc(struct net_device *dev, u32 handle,
}
mqprio:
#endif
if (tc->type != TC_SETUP_MQPRIO)
return -EINVAL;
......@@ -3350,6 +3352,7 @@ static int mlx5e_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
}
}
#ifdef CONFIG_MLX5_ESWITCH
static int mlx5e_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
{
struct mlx5e_priv *priv = netdev_priv(dev);
......@@ -3452,6 +3455,7 @@ static int mlx5e_get_vf_stats(struct net_device *dev,
return mlx5_eswitch_get_vport_stats(mdev->priv.eswitch, vf + 1,
vf_stats);
}
#endif
static void mlx5e_add_vxlan_port(struct net_device *netdev,
struct udp_tunnel_info *ti)
......@@ -3685,7 +3689,7 @@ static void mlx5e_netpoll(struct net_device *dev)
}
#endif
static const struct net_device_ops mlx5e_netdev_ops_basic = {
static const struct net_device_ops mlx5e_netdev_ops = {
.ndo_open = mlx5e_open,
.ndo_stop = mlx5e_close,
.ndo_start_xmit = mlx5e_xmit,
......@@ -3711,34 +3715,7 @@ static const struct net_device_ops mlx5e_netdev_ops_basic = {
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = mlx5e_netpoll,
#endif
};
static const struct net_device_ops mlx5e_netdev_ops_sriov = {
.ndo_open = mlx5e_open,
.ndo_stop = mlx5e_close,
.ndo_start_xmit = mlx5e_xmit,
.ndo_setup_tc = mlx5e_ndo_setup_tc,
.ndo_select_queue = mlx5e_select_queue,
.ndo_get_stats64 = mlx5e_get_stats,
.ndo_set_rx_mode = mlx5e_set_rx_mode,
.ndo_set_mac_address = mlx5e_set_mac,
.ndo_vlan_rx_add_vid = mlx5e_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = mlx5e_vlan_rx_kill_vid,
.ndo_set_features = mlx5e_set_features,
.ndo_change_mtu = mlx5e_change_mtu,
.ndo_do_ioctl = mlx5e_ioctl,
.ndo_set_tx_maxrate = mlx5e_set_tx_maxrate,
.ndo_udp_tunnel_add = mlx5e_add_vxlan_port,
.ndo_udp_tunnel_del = mlx5e_del_vxlan_port,
.ndo_features_check = mlx5e_features_check,
#ifdef CONFIG_RFS_ACCEL
.ndo_rx_flow_steer = mlx5e_rx_flow_steer,
#endif
.ndo_tx_timeout = mlx5e_tx_timeout,
.ndo_xdp = mlx5e_xdp,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = mlx5e_netpoll,
#endif
#ifdef CONFIG_MLX5_ESWITCH
/* SRIOV E-Switch NDOs */
.ndo_set_vf_mac = mlx5e_set_vf_mac,
.ndo_set_vf_vlan = mlx5e_set_vf_vlan,
......@@ -3750,6 +3727,7 @@ static const struct net_device_ops mlx5e_netdev_ops_sriov = {
.ndo_get_vf_stats = mlx5e_get_vf_stats,
.ndo_has_offload_stats = mlx5e_has_offload_stats,
.ndo_get_offload_stats = mlx5e_get_offload_stats,
#endif
};
static int mlx5e_check_required_hca_cap(struct mlx5_core_dev *mdev)
......@@ -3979,9 +3957,11 @@ static void mlx5e_set_netdev_dev_addr(struct net_device *netdev)
}
}
#if IS_ENABLED(CONFIG_NET_SWITCHDEV) && IS_ENABLED(CONFIG_MLX5_ESWITCH)
static const struct switchdev_ops mlx5e_switchdev_ops = {
.switchdev_port_attr_get = mlx5e_attr_get,
};
#endif
static void mlx5e_build_nic_netdev(struct net_device *netdev)
{
......@@ -3992,15 +3972,12 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
SET_NETDEV_DEV(netdev, &mdev->pdev->dev);
if (MLX5_CAP_GEN(mdev, vport_group_manager)) {
netdev->netdev_ops = &mlx5e_netdev_ops_sriov;
netdev->netdev_ops = &mlx5e_netdev_ops;
#ifdef CONFIG_MLX5_CORE_EN_DCB
if (MLX5_CAP_GEN(mdev, qos))
netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
if (MLX5_CAP_GEN(mdev, vport_group_manager) && MLX5_CAP_GEN(mdev, qos))
netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
#endif
} else {
netdev->netdev_ops = &mlx5e_netdev_ops_basic;
}
netdev->watchdog_timeo = 15 * HZ;
......@@ -4072,7 +4049,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
mlx5e_set_netdev_dev_addr(netdev);
#ifdef CONFIG_NET_SWITCHDEV
#if IS_ENABLED(CONFIG_NET_SWITCHDEV) && IS_ENABLED(CONFIG_MLX5_ESWITCH)
if (MLX5_VPORT_MANAGER(mdev))
netdev->switchdev_ops = &mlx5e_switchdev_ops;
#endif
......@@ -4431,6 +4408,7 @@ static void *mlx5e_add(struct mlx5_core_dev *mdev)
if (err)
return NULL;
#ifdef CONFIG_MLX5_ESWITCH
if (MLX5_VPORT_MANAGER(mdev)) {
rpriv = mlx5e_alloc_nic_rep_priv(mdev);
if (!rpriv) {
......@@ -4438,6 +4416,7 @@ static void *mlx5e_add(struct mlx5_core_dev *mdev)
return NULL;
}
}
#endif
netdev = mlx5e_create_netdev(mdev, &mlx5e_nic_profile, rpriv);
if (!netdev) {
......
......@@ -38,6 +38,7 @@
#include "eswitch.h"
#include "en.h"
#ifdef CONFIG_MLX5_ESWITCH
struct mlx5e_neigh_update_table {
struct rhashtable neigh_ht;
/* Save the neigh hash entries in a list in addition to the hash table
......@@ -142,5 +143,12 @@ void mlx5e_rep_encap_entry_detach(struct mlx5e_priv *priv,
struct mlx5e_encap_entry *e);
void mlx5e_rep_queue_neigh_stats_work(struct mlx5e_priv *priv);
#else /* CONFIG_MLX5_ESWITCH */
static inline void mlx5e_register_vport_reps(struct mlx5e_priv *priv) {}
static inline void mlx5e_unregister_vport_reps(struct mlx5e_priv *priv) {}
static inline bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) { return false; }
static inline int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) { return 0; }
static inline void mlx5e_remove_sqs_fwd_rules(struct mlx5e_priv *priv) {}
#endif
#endif /* __MLX5E_REP_H__ */
......@@ -857,6 +857,7 @@ void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)
&wqe->next.next_wqe_index);
}
#ifdef CONFIG_MLX5_ESWITCH
void mlx5e_handle_rx_cqe_rep(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)
{
struct net_device *netdev = rq->netdev;
......@@ -901,6 +902,7 @@ void mlx5e_handle_rx_cqe_rep(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)
mlx5_wq_ll_pop(&rq->wq, wqe_counter_be,
&wqe->next.next_wqe_index);
}
#endif
static inline void mlx5e_mpwqe_fill_rx_skb(struct mlx5e_rq *rq,
struct mlx5_cqe64 *cqe,
......
......@@ -35,6 +35,7 @@
#define MLX5E_TC_FLOW_ID_MASK 0x0000ffff
#ifdef CONFIG_MLX5_ESWITCH
int mlx5e_tc_init(struct mlx5e_priv *priv);
void mlx5e_tc_cleanup(struct mlx5e_priv *priv);
......@@ -60,4 +61,10 @@ static inline int mlx5e_tc_num_filters(struct mlx5e_priv *priv)
return atomic_read(&priv->fs.tc.ht.nelems);
}
#else /* CONFIG_MLX5_ESWITCH */
static inline int mlx5e_tc_init(struct mlx5e_priv *priv) { return 0; }
static inline void mlx5e_tc_cleanup(struct mlx5e_priv *priv) {}
static inline int mlx5e_tc_num_filters(struct mlx5e_priv *priv) { return 0; }
#endif
#endif /* __MLX5_EN_TC_H__ */
......@@ -36,9 +36,7 @@
#include <linux/mlx5/cmd.h>
#include "mlx5_core.h"
#include "fpga/core.h"
#ifdef CONFIG_MLX5_CORE_EN
#include "eswitch.h"
#endif
enum {
MLX5_EQE_SIZE = sizeof(struct mlx5_eqe),
......@@ -467,11 +465,9 @@ static irqreturn_t mlx5_eq_int(int irq, void *eq_ptr)
}
break;
#ifdef CONFIG_MLX5_CORE_EN
case MLX5_EVENT_TYPE_NIC_VPORT_CHANGE:
mlx5_eswitch_vport_event(dev->priv.eswitch, eqe);
break;
#endif
case MLX5_EVENT_TYPE_PORT_MODULE_EVENT:
mlx5_port_module_event(dev, eqe);
......
......@@ -39,6 +39,14 @@
#include <linux/mlx5/device.h>
#include "lib/mpfs.h"
enum {
SRIOV_NONE,
SRIOV_LEGACY,
SRIOV_OFFLOADS
};
#ifdef CONFIG_MLX5_ESWITCH
#define MLX5_MAX_UC_PER_VPORT(dev) \
(1 << MLX5_CAP_GEN(dev, log_max_current_uc_list))
......@@ -125,12 +133,6 @@ struct mlx5_eswitch_fdb {
};
};
enum {
SRIOV_NONE,
SRIOV_LEGACY,
SRIOV_OFFLOADS
};
struct mlx5_esw_sq {
struct mlx5_flow_handle *send_to_vport_rule;
struct list_head list;
......@@ -292,4 +294,13 @@ int __mlx5_eswitch_set_vport_vlan(struct mlx5_eswitch *esw,
#define esw_debug(dev, format, ...) \
mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
#else /* CONFIG_MLX5_ESWITCH */
/* eswitch API stubs */
static inline int mlx5_eswitch_init(struct mlx5_core_dev *dev) { return 0; }
static inline void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw) {}
static inline void mlx5_eswitch_vport_event(struct mlx5_eswitch *esw, struct mlx5_eqe *eqe) {}
static inline int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) { return 0; }
static inline void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw) {}
#endif /* CONFIG_MLX5_ESWITCH */
#endif /* __MLX5_ESWITCH_H__ */
......@@ -54,9 +54,7 @@
#include "mlx5_core.h"
#include "fs_core.h"
#include "lib/mpfs.h"
#ifdef CONFIG_MLX5_CORE_EN
#include "eswitch.h"
#endif
#include "lib/mlx5.h"
#include "fpga/core.h"
#include "accel/ipsec.h"
......@@ -953,13 +951,11 @@ static int mlx5_init_once(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
goto err_rl_cleanup;
}
#ifdef CONFIG_MLX5_CORE_EN
err = mlx5_eswitch_init(dev);
if (err) {
dev_err(&pdev->dev, "Failed to init eswitch %d\n", err);
goto err_mpfs_cleanup;
}
#endif
err = mlx5_sriov_init(dev);
if (err) {
......@@ -978,10 +974,8 @@ static int mlx5_init_once(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
err_sriov_cleanup:
mlx5_sriov_cleanup(dev);
err_eswitch_cleanup:
#ifdef CONFIG_MLX5_CORE_EN
mlx5_eswitch_cleanup(dev->priv.eswitch);
err_mpfs_cleanup:
#endif
mlx5_mpfs_cleanup(dev);
err_rl_cleanup:
mlx5_cleanup_rl_table(dev);
......@@ -1002,9 +996,7 @@ static void mlx5_cleanup_once(struct mlx5_core_dev *dev)
{
mlx5_fpga_cleanup(dev);
mlx5_sriov_cleanup(dev);
#ifdef CONFIG_MLX5_CORE_EN
mlx5_eswitch_cleanup(dev->priv.eswitch);
#endif
mlx5_mpfs_cleanup(dev);
mlx5_cleanup_rl_table(dev);
mlx5_cleanup_reserved_gids(dev);
......@@ -1311,7 +1303,7 @@ struct mlx5_core_event_handler {
};
static const struct devlink_ops mlx5_devlink_ops = {
#ifdef CONFIG_MLX5_CORE_EN
#ifdef CONFIG_MLX5_ESWITCH
.eswitch_mode_set = mlx5_devlink_eswitch_mode_set,
.eswitch_mode_get = mlx5_devlink_eswitch_mode_get,
.eswitch_inline_mode_set = mlx5_devlink_eswitch_inline_mode_set,
......
......@@ -33,9 +33,7 @@
#include <linux/pci.h>
#include <linux/mlx5/driver.h>
#include "mlx5_core.h"
#ifdef CONFIG_MLX5_CORE_EN
#include "eswitch.h"
#endif
bool mlx5_sriov_is_enabled(struct mlx5_core_dev *dev)
{
......@@ -57,14 +55,12 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs)
return -EBUSY;
}
#ifdef CONFIG_MLX5_CORE_EN
err = mlx5_eswitch_enable_sriov(dev->priv.eswitch, num_vfs, SRIOV_LEGACY);
if (err) {
mlx5_core_warn(dev,
"failed to enable eswitch SRIOV (%d)\n", err);
return err;
}
#endif
for (vf = 0; vf < num_vfs; vf++) {
err = mlx5_core_enable_hca(dev, vf + 1);
......@@ -88,11 +84,7 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev)
int vf;
if (!sriov->enabled_vfs)
#ifdef CONFIG_MLX5_CORE_EN
goto disable_sriov_resources;
#else
return;
#endif
goto out;
for (vf = 0; vf < sriov->num_vfs; vf++) {
if (!sriov->vfs_ctx[vf].enabled)
......@@ -106,10 +98,8 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev)
sriov->enabled_vfs--;
}
#ifdef CONFIG_MLX5_CORE_EN
disable_sriov_resources:
out:
mlx5_eswitch_disable_sriov(dev->priv.eswitch);
#endif
if (mlx5_wait_for_vf_pages(dev))
mlx5_core_warn(dev, "timeout reclaiming VFs pages\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment