regulator: sm5703-regulator: Add regulators support for SM5703 MFD

Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/Kconfig

@@ -1167,6 +1167,13 @@ config REGULATOR_SLG51000
 	  The SLG51000 is seven compact and customizable low dropout
 	  regulators.
 
+config REGULATOR_SM5703
+	tristate "Silicon Mitus SM5703 regulators"
+	depends on MFD_SM5703
+	help
+	  This driver provides support for voltage regulators of SM5703
+	  multi-function device.
+
 config REGULATOR_STM32_BOOSTER
 	tristate "STMicroelectronics STM32 BOOSTER"
 	depends on ARCH_STM32 || COMPILE_TEST

drivers/regulator/Makefile

@@ -139,6 +139,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o
+obj-$(CONFIG_REGULATOR_SM5703) += sm5703-regulator.o
 obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o

drivers/regulator/sm5703-regulator.c

+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/mfd/sm5703.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+enum sm5703_regulators {
+	SM5703_BUCK,
+	SM5703_LDO1,
+	SM5703_LDO2,
+	SM5703_LDO3,
+	SM5703_USBLDO1,
+	SM5703_USBLDO2,
+	SM5703_VBUS,
+	SM5703_MAX_REGULATORS,
+};
+
+static const int sm5703_ldo_voltagemap[] = {
+	1500000, 1800000, 2600000, 2800000, 3000000, 3300000,
+};
+
+static const int sm5703_buck_voltagemap[] = {
+	1000000, 1000000, 1000000, 1000000,
+	1000000, 1000000, 1000000, 1000000,
+	1000000, 1000000, 1000000, 1100000,
+	1200000, 1300000, 1400000, 1500000,
+	1600000, 1700000, 1800000, 1900000,
+	2000000, 2100000, 2200000, 2300000,
+	2400000, 2500000, 2600000, 2700000,
+	2800000, 2900000, 3000000, 3000000,
+};
+
+#define SM5703USBLDO(_name, _id)					\
+	[SM5703_USBLDO ## _id] = {					\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_USBLDO ## _id,				\
+		.ops = &sm5703_regulator_ops_fixed,			\
+		.fixed_uV = SM5703_USBLDO_MICROVOLT,			\
+		.enable_reg = SM5703_REG_USBLDO12,			\
+		.enable_mask = SM5703_REG_EN_USBLDO ##_id,		\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define SM5703VBUS(_name)						\
+	[SM5703_VBUS] = {						\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_VBUS,					\
+		.ops = &sm5703_regulator_ops_fixed,			\
+		.fixed_uV = SM5703_VBUS_MICROVOLT,			\
+		.enable_reg = SM5703_REG_CNTL,				\
+		.enable_mask = SM5703_OPERATION_MODE_MASK,		\
+		.enable_val = SM5703_OPERATION_MODE_USB_OTG_MODE,	\
+		.disable_val = SM5703_OPERATION_MODE_CHARGING_ON,	\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define SM5703BUCK(_name)						\
+	[SM5703_BUCK] = {						\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_BUCK,					\
+		.ops = &sm5703_regulator_ops,				\
+		.n_voltages = ARRAY_SIZE(sm5703_buck_voltagemap),	\
+		.volt_table = sm5703_buck_voltagemap,			\
+		.vsel_reg = SM5703_REG_BUCK,				\
+		.vsel_mask = SM5703_BUCK_VOLT_MASK,			\
+		.enable_reg = SM5703_REG_BUCK,				\
+		.enable_mask = SM5703_REG_EN_BUCK,			\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define SM5703LDO(_name, _id)						\
+	[SM5703_LDO ## _id] = {						\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_LDO ## _id,				\
+		.ops = &sm5703_regulator_ops,				\
+		.n_voltages = ARRAY_SIZE(sm5703_ldo_voltagemap),	\
+		.volt_table = sm5703_ldo_voltagemap,			\
+		.vsel_reg = SM5703_REG_LDO ##_id,			\
+		.vsel_mask = SM5703_LDO_VOLT_MASK,			\
+		.enable_reg = SM5703_REG_LDO ##_id,			\
+		.enable_mask = SM5703_LDO_EN,				\
+		.owner			= THIS_MODULE,			\
+	}
+
+static const struct regulator_ops sm5703_regulator_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_table,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops sm5703_regulator_ops_fixed = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc sm5703_regulators_desc[SM5703_MAX_REGULATORS] = {
+	SM5703BUCK("buck"),
+	SM5703LDO("ldo1", 1),
+	SM5703LDO("ldo2", 2),
+	SM5703LDO("ldo3", 3),
+	SM5703USBLDO("usbldo1", 1),
+	SM5703USBLDO("usbldo2", 2),
+	SM5703VBUS("vbus"),
+};
+
+static int sm5703_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regulator_config config = { NULL, };
+	struct regulator_dev *rdev;
+	struct sm5703_dev *sm5703 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+
+	config.dev = dev->parent;
+	config.regmap = sm5703->regmap;
+
+	for (i = 0; i < SM5703_MAX_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev,
+					       &sm5703_regulators_desc[i],
+					       &config);
+		if (IS_ERR(rdev))
+			return dev_err_probe(dev, PTR_ERR(rdev),
+					     "Failed to register a regulator\n");
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id sm5703_regulator_id[] = {
+	{ "sm5703-regulator", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, sm5703_regulator_id);
+
+static struct platform_driver sm5703_regulator_driver = {
+	.driver = {
+		.name = "sm5703-regulator",
+	},
+	.probe	= sm5703_regulator_probe,
+	.id_table	= sm5703_regulator_id,
+};
+
+module_platform_driver(sm5703_regulator_driver);
+
+MODULE_DESCRIPTION("Silicon Mitus SM5703 LDO/Buck/USB regulator driver");
+MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>");
+MODULE_LICENSE("GPL");