Commit e892b75f authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (atxp1) Drop auto-detection

Auto-detection for this chip is highly unreliable, and one of its
I2C addresses can also be used by EEPROMs, increasing the risk for
false positives even more. Drop auto-detection entirely to remove
the risk.
Reviewed-by: default avatarJean Delvare <jdelvare@suse.de>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent ea33a5e7
......@@ -11,6 +11,10 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* The ATXP1 can reside on I2C addresses 0x37 or 0x4e. The chip is
* not auto-detected by the driver and must be instantiated explicitly.
* See Documentation/i2c/instantiating-devices for more information.
*/
#include <linux/kernel.h>
......@@ -38,8 +42,6 @@ MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VIDMASK 0x1f
#define ATXP1_GPIO1MASK 0x0f
static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
struct atxp1_data {
struct i2c_client *client;
struct mutex update_lock;
......@@ -254,48 +256,6 @@ static struct attribute *atxp1_attrs[] = {
};
ATTRIBUTE_GROUPS(atxp1);
/* Return 0 if detection is successful, -ENODEV otherwise */
static int atxp1_detect(struct i2c_client *new_client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
u8 temp;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Detect ATXP1, checking if vendor ID registers are all zero */
if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
return -ENODEV;
/*
* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
* showing the same as register 0x00
*/
temp = i2c_smbus_read_byte_data(new_client, 0x00);
if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
(i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
return -ENODEV;
/* Get VRM */
temp = vid_which_vrm();
if ((temp != 90) && (temp != 91)) {
dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n",
temp / 10, temp % 10);
return -ENODEV;
}
strlcpy(info->type, "atxp1", I2C_NAME_SIZE);
return 0;
}
static int atxp1_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -309,6 +269,11 @@ static int atxp1_probe(struct i2c_client *client,
/* Get VRM */
data->vrm = vid_which_vrm();
if (data->vrm != 90 && data->vrm != 91) {
dev_err(dev, "atxp1: Not supporting VRM %d.%d\n",
data->vrm / 10, data->vrm % 10);
return -ENODEV;
}
data->client = client;
mutex_init(&data->update_lock);
......@@ -337,8 +302,6 @@ static struct i2c_driver atxp1_driver = {
},
.probe = atxp1_probe,
.id_table = atxp1_id,
.detect = atxp1_detect,
.address_list = normal_i2c,
};
module_i2c_driver(atxp1_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment