ARM: OMAP: hsmmc: Support for AM3517 MMC1 voltages

This patch fixes the following error message which appears
while intializing MMC1 on the AM3517 EVM base-board:
    mmc0: host doesn't support card's voltages
    mmc0: error -22 whilst initialising SD card
The ocr_mask, which enumerates the volatges supported by the
MMC card was not being indicated before, assuming that a separate
Vcc regulator maybe another controllable regulator driver would be
doing this. This patch statically specifies a subset of the voltages
supported by the MMC driver, which are provided by the current fixed
voltage regulator on AM3517 EVM.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Abhilash K V <abhilash.kv@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/hsmmc.c

@@ -353,7 +353,15 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	 *
 	 * temporary HACK: ocr_mask instead of fixed supply
 	 */
-	mmc->slots[0].ocr_mask = c->ocr_mask;
+	if (cpu_is_omap3505() || cpu_is_omap3517())
+		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+					 MMC_VDD_26_27 |
+					 MMC_VDD_27_28 |
+					 MMC_VDD_29_30 |
+					 MMC_VDD_30_31 |
+					 MMC_VDD_31_32;
+	else
+		mmc->slots[0].ocr_mask = c->ocr_mask;
 
 	if (!cpu_is_omap3517() && !cpu_is_omap3505())
 		mmc->slots[0].features |= HSMMC_HAS_PBIAS;