Merge bk://kernel.bkbits.net/jgarzik/net-drivers-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

drivers/net/Kconfig

@@ -2042,6 +2042,17 @@ config R8169
 	  say M here and read <file:Documentation/modules.txt>.  This is
 	  recommended.  The module will be called r8169.
 
+config SIS190
+	tristate "SiS190 gigabit ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	---help---
+	  Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
+
+	  If you want to compile this driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  This is
+	  recommended.  The module will be called sis190.
+
 config SK98LIN
 	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
 	depends on PCI

drivers/net/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_PCNET32) += pcnet32.o mii.o
 obj-$(CONFIG_EEPRO100) += eepro100.o mii.o
 obj-$(CONFIG_TLAN) += tlan.o
 obj-$(CONFIG_EPIC100) += epic100.o mii.o
+obj-$(CONFIG_SIS190) += sis190.o
 obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_ACENIC) += acenic.o

drivers/net/Makefile.lib

@@ -25,6 +25,7 @@ obj-$(CONFIG_PCMCIA_SMC91C92)	+= crc32.o
 obj-$(CONFIG_PCMCIA_XIRTULIP)	+= crc32.o
 obj-$(CONFIG_PCNET32)		+= crc32.o
 obj-$(CONFIG_SGI_IOC3_ETH)	+= crc32.o
+obj-$(CONFIG_SIS190)		+= crc32.o
 obj-$(CONFIG_SIS900)		+= crc32.o
 obj-$(CONFIG_SMC9194)		+= crc32.o
 obj-$(CONFIG_ADAPTEC_STARFIRE)	+= crc32.o

drivers/net/arcnet/com20020-pci.c

@@ -97,7 +97,7 @@ static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_de
 	dev->base_addr = ioaddr;
 	dev->irq = pdev->irq;
 	dev->dev_addr[0] = node;
-	lp->card_name = pdev->dev.name;
+	lp->card_name = "PCI COM20020";
 	lp->card_flags = id->driver_data;
 	lp->backplane = backplane;
 	lp->clockp = clockp & 7;
@@ -105,7 +105,7 @@ static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_de
 	lp->timeout = timeout;
 	lp->hw.owner = THIS_MODULE;
 
-	if (check_region(ioaddr, ARCNET_TOTAL_SIZE)) {
+	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com20020-pci")) {
 		BUGMSG(D_INIT, "IO region %xh-%xh already allocated.\n",
 		       ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
 		err = -EBUSY;
@@ -122,6 +122,8 @@ static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_de
 		goto out_priv;
 	}
 
+	release_region(ioaddr, ARCNET_TOTAL_SIZE);
+
 	if ((err = com20020_found(dev, SA_SHIRQ)) != 0)
 	        goto out_priv;
 

drivers/net/arcnet/com20020.c

@@ -55,7 +55,7 @@ static void com20020_copy_to_card(struct net_device *dev, int bufnum,
 static void com20020_copy_from_card(struct net_device *dev, int bufnum,
 				    int offset, void *buf, int count);
 static void com20020_set_mc_list(struct net_device *dev);
-static void com20020_close(struct net_device *, bool);
+static void com20020_close(struct net_device *);
 
 static void com20020_copy_from_card(struct net_device *dev, int bufnum,
 				    int offset, void *buf, int count)
@@ -86,7 +86,7 @@ static void com20020_copy_to_card(struct net_device *dev, int bufnum,
 
 
 /* Reset the card and check some basic stuff during the detection stage. */
-int __devinit com20020_check(struct net_device *dev)
+int com20020_check(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr, status;
 	struct arcnet_local *lp = dev->priv;
@@ -152,7 +152,7 @@ int __devinit com20020_check(struct net_device *dev)
 /* Set up the struct net_device associated with this card.  Called after
  * probing succeeds.
  */
-int __devinit com20020_found(struct net_device *dev, int shared)
+int com20020_found(struct net_device *dev, int shared)
 {
 	struct arcnet_local *lp;
 	int ioaddr = dev->base_addr;
@@ -180,6 +180,10 @@ int __devinit com20020_found(struct net_device *dev, int shared)
 	if (!dev->dev_addr[0])
 		dev->dev_addr[0] = inb(ioaddr + 8);	/* FIXME: do this some other way! */
 
+	/* reserve the I/O region */
+	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)"))
+		return -EBUSY;
+
 	SET_SUBADR(SUB_SETUP1);
 	outb(lp->setup, _XREG);
 
@@ -203,13 +207,10 @@ int __devinit com20020_found(struct net_device *dev, int shared)
 	if (request_irq(dev->irq, &arcnet_interrupt, shared,
 			"arcnet (COM20020)", dev)) {
 		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
+		release_region(ioaddr, ARCNET_TOTAL_SIZE);
 		return -ENODEV;
 	}
-	/* reserve the I/O region */
-	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
-		free_irq(dev->irq, dev);
-		return -EBUSY;
-	}
+
 	dev->base_addr = ioaddr;
 
 	BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
@@ -226,8 +227,8 @@ int __devinit com20020_found(struct net_device *dev, int shared)
 	       clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
 
 	if (!dev->init && register_netdev(dev)) {
-		free_irq(dev->irq, dev);
 		release_region(ioaddr, ARCNET_TOTAL_SIZE);
+		free_irq(dev->irq, dev);
 		return -EIO;
 	}
 	return 0;
@@ -298,16 +299,14 @@ static int com20020_status(struct net_device *dev)
 	return ASTATUS();
 }
 
-static void com20020_close(struct net_device *dev, bool open)
+static void com20020_close(struct net_device *dev)
 {
 	struct arcnet_local *lp = (struct arcnet_local *) dev->priv;
 	int ioaddr = dev->base_addr;
 
-	if (!open) {
-		/* disable transmitter */
-		lp->config &= ~TXENcfg;
-		SETCONF;
-	}
+	/* disable transmitter */
+	lp->config &= ~TXENcfg;
+	SETCONF;
 }
 
 /* Set or clear the multicast filter for this adaptor.
@@ -339,7 +338,7 @@ static void com20020_set_mc_list(struct net_device *dev)
 	}
 }
 
-void __devexit com20020_remove(struct net_device *dev)
+void com20020_remove(struct net_device *dev)
 {
 	unregister_netdev(dev);
 	free_irq(dev->irq, dev);

drivers/net/arcnet/com90io.c

@@ -158,14 +158,14 @@ static int __init com90io_probe(struct net_device *dev)
 		       "must specify the base address!\n");
 		return -ENODEV;
 	}
-	if (check_region(ioaddr, ARCNET_TOTAL_SIZE)) {
+	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) {
 		BUGMSG(D_INIT_REASONS, "IO check_region %x-%x failed.\n",
 		       ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
 		return -ENXIO;
 	}
 	if (ASTATUS() == 0xFF) {
 		BUGMSG(D_INIT_REASONS, "IO address %x empty\n", ioaddr);
-		return -ENODEV;
+		goto err_out;
 	}
 	inb(_RESET);
 	mdelay(RESETtime);
@@ -174,7 +174,7 @@ static int __init com90io_probe(struct net_device *dev)
 
 	if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
 		BUGMSG(D_INIT_REASONS, "Status invalid (%Xh).\n", status);
-		return -ENODEV;
+		goto err_out;
 	}
 	BUGMSG(D_INIT_REASONS, "Status after reset: %X\n", status);
 
@@ -186,7 +186,7 @@ static int __init com90io_probe(struct net_device *dev)
 
 	if (status & RESETflag) {
 		BUGMSG(D_INIT_REASONS, "Eternal reset (status=%Xh)\n", status);
-		return -ENODEV;
+		goto err_out;
 	}
 	outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG);
 
@@ -198,7 +198,7 @@ static int __init com90io_probe(struct net_device *dev)
 	if ((status = inb(_MEMDATA)) != 0xd1) {
 		BUGMSG(D_INIT_REASONS, "Signature byte not found"
 		       " (%Xh instead).\n", status);
-		return -ENODEV;
+		goto err_out;
 	}
 	if (!dev->irq) {
 		/*
@@ -215,10 +215,15 @@ static int __init com90io_probe(struct net_device *dev)
 
 		if (dev->irq <= 0) {
 			BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed\n");
-			return -ENODEV;
+			goto err_out;
 		}
 	}
+	release_region(ioaddr, ARCNET_TOTAL_SIZE); /* end of probing */
 	return com90io_found(dev);
+
+err_out:
+	release_region(ioaddr, ARCNET_TOTAL_SIZE);
+	return -ENODEV;
 }
 
 

drivers/net/hydra.c

@@ -33,20 +33,8 @@
 
 #include "8390.h"
 
-#define NE_BASE		(dev->base_addr)
-#define NE_CMD		(0x00*2)
-
-#define NE_EN0_ISR      (0x07*2)
 #define NE_EN0_DCFG     (0x0e*2)
 
-#define NE_EN0_RSARLO   (0x08*2)
-#define NE_EN0_RSARHI   (0x09*2)
-#define NE_EN0_RCNTLO   (0x0a*2)
-#define NE_EN0_RXCR     (0x0c*2)
-#define NE_EN0_TXCR     (0x0d*2)
-#define NE_EN0_RCNTHI   (0x0b*2)
-#define NE_EN0_IMR      (0x0f*2)
-
 #define NESM_START_PG   0x0    /* First page of TX buffer */
 #define NESM_STOP_PG    0x40    /* Last page +1 of RX ring */
 
@@ -56,12 +44,10 @@
 
 #define WORDSWAP(a)     ((((a)>>8)&0xff) | ((a)<<8))
 
-#ifdef MODULE
 static struct net_device *root_hydra_dev;
-#endif
 
 static int __init hydra_probe(void);
-static int hydra_init(unsigned long board);
+static int __init hydra_init(unsigned long board);
 static int hydra_open(struct net_device *dev);
 static int hydra_close(struct net_device *dev);
 static void hydra_reset_8390(struct net_device *dev);
@@ -96,11 +82,11 @@ static int __init hydra_probe(void)
     return err;
 }
 
-int __init hydra_init(unsigned long board)
+static int __init hydra_init(unsigned long board)
 {
     struct net_device *dev;
     unsigned long ioaddr = board+HYDRA_NIC_BASE;
-    const char *name = NULL;
+    const char name[] = "NE2000";
     int start_page, stop_page;
     int j;
 
@@ -136,8 +122,6 @@ int __init hydra_init(unsigned long board)
 	return -ENOMEM;
     }
 
-    name = "NE2000";
-
     printk("%s: hydra at 0x%08lx, address %02x:%02x:%02x:%02x:%02x:%02x (hydra.c " HYDRA_VERSION ")\n", dev->name, ZTWO_PADDR(board),
 	dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
 	dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
@@ -235,7 +219,6 @@ static void hydra_block_output(struct net_device *dev, int count,
 
 static void __exit hydra_cleanup(void)
 {
-#ifdef MODULE
     struct net_device *dev, *next;
 
     while ((dev = root_hydra_dev)) {
@@ -246,7 +229,6 @@ static void __exit hydra_cleanup(void)
 	kfree(dev);
 	root_hydra_dev = next;
     }
-#endif
 }
 
 module_init(hydra_probe);

drivers/net/tokenring/3c359.c

@@ -315,7 +315,7 @@ int __devinit xl_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->irq=pdev->irq;
 	dev->base_addr=pci_resource_start(pdev,0) ; 
 	dev->init=NULL ; /* Must be null with new api, otherwise get called twice */
-	xl_priv->xl_card_name = (char *)pdev->dev.name ; 
+	xl_priv->xl_card_name = pci_name(pdev);
 	xl_priv->xl_mmio=ioremap(pci_resource_start(pdev,1), XL_IO_SPACE);
 	xl_priv->pdev = pdev ; 
 		

drivers/net/tokenring/olympic.c

@@ -230,9 +230,10 @@ static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device
 	dev->irq=pdev->irq;
 	dev->base_addr=pci_resource_start(pdev, 0);
 	dev->init=NULL; /* Must be NULL otherwise we get called twice */
-	olympic_priv->olympic_card_name = (char *)pdev->dev.name ; 
+	olympic_priv->olympic_card_name = pci_name(pdev);
 	olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256);
 	olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048);
+#warning check ioremap return value
 	olympic_priv->pdev = pdev ; 
 				
 	if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )

drivers/net/tulip/tulip_core.c

@@ -226,6 +226,7 @@ static struct pci_device_id tulip_pci_tbl[] = {
 	{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
  	{ 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },	/* ALi 1563 integrated ethernet */
+	{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
 	{ } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, tulip_pci_tbl);

drivers/net/wan/z85230.c

@@ -890,12 +890,12 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c)
 	if(c->mtu  > PAGE_SIZE/2)
 		return -EMSGSIZE;
 	 
-	c->rx_buf[0]=(void *)get_free_page(GFP_KERNEL|GFP_DMA);
+	c->rx_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
 	if(c->rx_buf[0]==NULL)
 		return -ENOBUFS;
 	c->rx_buf[1]=c->rx_buf[0]+PAGE_SIZE/2;
 	
-	c->tx_dma_buf[0]=(void *)get_free_page(GFP_KERNEL|GFP_DMA);
+	c->tx_dma_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
 	if(c->tx_dma_buf[0]==NULL)
 	{
 		free_page((unsigned long)c->rx_buf[0]);
@@ -1080,7 +1080,7 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
 	if(c->mtu  > PAGE_SIZE/2)
 		return -EMSGSIZE;
 	 
-	c->tx_dma_buf[0]=(void *)get_free_page(GFP_KERNEL|GFP_DMA);
+	c->tx_dma_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
 	if(c->tx_dma_buf[0]==NULL)
 		return -ENOBUFS;
 

drivers/net/wireless/airo.c

@@ -1025,6 +1025,7 @@ struct airo_info {
 #define FLAG_802_11    0x200
 #define FLAG_PENDING_XMIT   0x400
 #define FLAG_PENDING_XMIT11 0x800
+#define FLAG_PCI    0x1000
 	int (*bap_read)(struct airo_info*, u16 *pu16Dst, int bytelen,
 			int whichbap);
 	unsigned short *flash;
@@ -4093,6 +4094,7 @@ static int __devinit airo_pci_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 	pci_set_drvdata(pdev, dev);
+	((struct airo_info *)dev->priv)->flags |= FLAG_PCI;
 	return 0;
 }
 
@@ -4134,11 +4136,19 @@ static int __init airo_init_module( void )
 
 static void __exit airo_cleanup_module( void )
 {
+	int is_pci = 0;
 	while( airo_devices ) {
 		printk( KERN_INFO "airo: Unregistering %s\n", airo_devices->dev->name );
+#ifdef CONFIG_PCI
+		if (((struct airo_info *)airo_devices->dev->priv)->flags & FLAG_PCI)
+			is_pci = 1;
+#endif
 		stop_airo_card( airo_devices->dev, 1 );
 	}
 	remove_proc_entry("aironet", proc_root_driver);
+
+	if (is_pci)
+		pci_unregister_driver(&airo_driver);
 }
 
 #ifdef WIRELESS_EXT
@@ -5612,7 +5622,7 @@ static const struct iw_handler_def	airo_handler_def =
 	.standard	= (iw_handler *) airo_handler,
 	.private	= (iw_handler *) airo_private_handler,
 	.private_args	= (struct iw_priv_args *) airo_private_args,
-#if 0 && WIRELESS_EXT > 15
+#if WIRELESS_EXT > 15
 	.spy_offset	= ((void *) (&((struct airo_info *) NULL)->spy_data) -
 			   (void *) NULL),
 #endif /* WIRELESS_EXT > 15 */

drivers/net/wireless/atmel_cs.c

@@ -379,7 +379,6 @@ static struct {
 
 /* This is strictly temporary, until PCMCIA devices get integrated into the device model. */
 static struct device atmel_device = {
-        .name      = "Atmel at76c50x wireless",
         .bus_id    = "pcmcia",
 };