ARM: at91/DT: add NAND + DMA property

Add the "atmel,nand-has-dma" property to NAND node for SoC that
can use the DMA to perform NAND accesses.
Use of this property was added in 1b719265
(mtd: atmel_nand: add a new dt binding item for nand dma support).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -817,6 +817,7 @@ nand0: nand@40000000 {
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 8 GPIO_ACTIVE_HIGH

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -570,6 +570,7 @@ nand0: nand@40000000 {
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 GPIO_ACTIVE_HIGH

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -790,6 +790,7 @@ nand0: nand@40000000 {
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 GPIO_ACTIVE_HIGH

arch/arm/boot/dts/sama5d3.dtsi

@@ -1256,6 +1256,7 @@ nand0: nand@60000000 {
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;