Commit e916d85b authored by Johan Jonker's avatar Johan Jonker Committed by Heiko Stuebner

arm64: dts: rockchip: rename and label gpio-led subnodes

Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:

arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds:
'work' does not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Fix these errors with help of the following rules:

1: Add nodename in the preferred form.

2: Always add a label that ends with '_led' to prevent conflicts
   with other labels such as 'power' and 'mmc'

3: If leds need pinctrl add a label that ends with '_led_pin'
   also to prevent conflicts with other labels.

patternProperties:
  # The first form is preferred, but fall back to just 'led'
  # anywhere in the node name to at least catch some child nodes.
  "(^led-[0-9a-f]$|led)":

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: default avatarJohan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-2-jbx6244@gmail.comSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 84836ded
......@@ -28,14 +28,14 @@ ir_tx {
leds {
compatible = "gpio-leds";
power {
power_led: led-0 {
label = "firefly:red:power";
linux,default-trigger = "ir-power-click";
default-state = "on";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
};
user {
user_led: led-1 {
label = "firefly:blue:user";
linux,default-trigger = "ir-user-click";
default-state = "off";
......
......@@ -128,9 +128,9 @@ sw16 {
leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "led_pins";
pinctrl-0 = <&led_pins>;
pinctrl-0 = <&blue_led_pin>;
led-0 {
blue_led: led-0 {
label = "blue:heartbeat";
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
......@@ -528,7 +528,7 @@ hp_det: hp-det {
};
leds {
led_pins: led-pins {
blue_led_pin: blue-led-pin {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......
......@@ -86,7 +86,7 @@ vcc_phy: vcc-phy-regulator {
leds {
compatible = "gpio-leds";
power {
power_led: led-0 {
label = "firefly:blue:power";
linux,default-trigger = "heartbeat";
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
......@@ -94,7 +94,7 @@ power {
mode = <0x23>;
};
user {
user_led: led-1 {
label = "firefly:yellow:user";
linux,default-trigger = "mmc1";
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
......
......@@ -73,12 +73,12 @@ ir-receiver {
leds {
compatible = "gpio-leds";
power {
power_led: led-0 {
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
standby {
standby_led: led-1 {
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
......
......@@ -50,13 +50,13 @@ power {
leds: gpio-leds {
compatible = "gpio-leds";
blue {
blue_led: led-0 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "geekbox:blue:led";
default-state = "on";
};
red {
red_led: led-1 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
label = "geekbox:red:led";
default-state = "off";
......
......@@ -50,7 +50,7 @@ power {
leds: gpio-leds {
compatible = "gpio-leds";
red {
red_led: led-0 {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "orion:red:led";
pinctrl-names = "default";
......@@ -58,7 +58,7 @@ red {
default-state = "on";
};
blue {
blue_led: led-1 {
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
label = "orion:blue:led";
pinctrl-names = "default";
......
......@@ -43,7 +43,7 @@ power {
leds: gpio-leds {
compatible = "gpio-leds";
work {
work_led: led-0 {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "r88:green:led";
pinctrl-names = "default";
......
......@@ -27,42 +27,43 @@ clkin_gmac: external-gmac-clock {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
<&user_led4>, <&wlan_led>, <&bt_led>;
pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
<&user_led3_pin>, <&user_led4_pin>,
<&wlan_led_pin>, <&bt_led_pin>;
user_led1 {
user_led1: led-1 {
label = "red:user1";
gpios = <&gpio4 25 0>;
linux,default-trigger = "heartbeat";
};
user_led2 {
user_led2: led-2 {
label = "red:user2";
gpios = <&gpio4 26 0>;
linux,default-trigger = "mmc0";
};
user_led3 {
user_led3: led-3 {
label = "red:user3";
gpios = <&gpio4 30 0>;
linux,default-trigger = "mmc1";
};
user_led4 {
user_led4: led-4 {
label = "red:user4";
gpios = <&gpio1 0 0>;
panic-indicator;
linux,default-trigger = "none";
};
wlan_active_led {
wlan_active_led: led-5 {
label = "red:wlan";
gpios = <&gpio1 1 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt_active_led {
bt_active_led: led-6 {
label = "red:bt";
gpios = <&gpio1 4 0>;
linux,default-trigger = "hci0-power";
......@@ -114,32 +115,32 @@ host_vbus_drv: host-vbus-drv {
};
leds {
user_led1: user_led1 {
user_led1_pin: user-led1-pin {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led2: user_led2 {
user_led2_pin: user-led2-pin {
rockchip,pins =
<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led3: user_led3 {
user_led3_pin: user-led3-pin {
rockchip,pins =
<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led4: user_led4 {
user_led4_pin: user-led4-pin {
rockchip,pins =
<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_led: wlan_led {
wlan_led_pin: wlan-led-pin {
rockchip,pins =
<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_led: bt_led {
bt_led_pin: bt-led-pin {
rockchip,pins =
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
......
......@@ -91,15 +91,15 @@ power {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
work-led {
work_led: led-0 {
label = "work";
default-state = "on";
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
};
diy-led {
diy_led: led-1 {
label = "diy";
default-state = "off";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
......@@ -629,11 +629,11 @@ wifi_host_wake_l: wifi-host-wake-l {
};
leds {
work_led_gpio: work_led-gpio {
work_led_pin: work-led-pin {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
diy_led_gpio: diy_led-gpio {
diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......
......@@ -39,9 +39,9 @@ ir-receiver {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&power_led_gpio>;
pinctrl-0 = <&power_led_pin>;
led-0 {
power_led: led-0 {
label = "blue:power";
gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
default-state = "on";
......@@ -510,7 +510,7 @@ ir_rx: ir-rx {
};
leds {
power_led_gpio: power-led-gpio {
power_led_pin: power-led-pin {
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......
......@@ -90,9 +90,9 @@ power {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
green-led {
green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
......@@ -100,7 +100,7 @@ green-led {
label = "green:power";
};
red-led {
red_led: led-1 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_STANDBY;
......@@ -824,11 +824,11 @@ lcd_panel_reset_gpio: lcd-panel-reset-gpio {
};
leds {
pwrled_gpio: pwrled_gpio {
pwr_led_pin: pwr-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
slpled_gpio: slpled_gpio {
slp_led_pin: slp-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......
......@@ -17,42 +17,43 @@ chosen {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
<&user_led4>, <&wlan_led>, <&bt_led>;
pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
<&user_led3_pin>, <&user_led4_pin>,
<&wlan_led_pin>, <&bt_led_pin>;
user_led1 {
user_led1: led-1 {
label = "green:user1";
gpios = <&gpio4 RK_PC2 0>;
linux,default-trigger = "heartbeat";
};
user_led2 {
user_led2: led-2 {
label = "green:user2";
gpios = <&gpio4 RK_PC6 0>;
linux,default-trigger = "mmc0";
};
user_led3 {
user_led3: led-3 {
label = "green:user3";
gpios = <&gpio4 RK_PD0 0>;
linux,default-trigger = "mmc1";
};
user_led4 {
user_led4: led-4 {
label = "green:user4";
gpios = <&gpio4 RK_PD4 0>;
panic-indicator;
linux,default-trigger = "none";
};
wlan_active_led {
wlan_active_led: led-5 {
label = "yellow:wlan";
gpios = <&gpio4 RK_PD5 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt_active_led {
bt_active_led: led-6 {
label = "blue:bt";
gpios = <&gpio4 RK_PD6 0>;
linux,default-trigger = "hci0-power";
......@@ -68,32 +69,32 @@ &pcie0 {
&pinctrl {
leds {
user_led1: user_led1 {
user_led1_pin: user-led1-pin {
rockchip,pins =
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led2: user_led2 {
user_led2_pin: user-led2-pin {
rockchip,pins =
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led3: user_led3 {
user_led3_pin: user-led3-pin {
rockchip,pins =
<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led4: user_led4 {
user_led4_pin: user-led4-pin {
rockchip,pins =
<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_led: wlan_led {
wlan_led_pin: wlan-led-pin {
rockchip,pins =
<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_led: bt_led {
bt_led_pin: bt-led-pin {
rockchip,pins =
<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment